Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Parts for sale (Private Classifieds) (http://www.the370z.com/parts-sale-private-classifieds/)
-   -   [WTB] Does anyone do customized illuminated kick plates? (http://www.the370z.com/parts-sale-private-classifieds/66909-does-anyone-do-customized-illuminated-kick-plates.html)

dmhenderson 02-13-2013 10:37 PM

Does anyone do customized illuminated kick plates?
 
I've seen DIY threads but I'm not much of an electrician. Does anyone offer a mod service? I did a few searches but didn't find anything.

DEpointfive0 02-13-2013 10:40 PM

Quote:

Originally Posted by dmhenderson (Post 2164279)
I've seen DIY threads but I'm not much of an electrician. Does anyone offer a mod service? I did a few searches but didn't find anything.

I'll text 370ZilverZ for you (he's no longer active on the forum)

dmhenderson 02-13-2013 10:41 PM

I want red ones. I could buy them and have them shipped directly to him if that helps. Not crazy about the orange.

logenl7 02-13-2013 10:44 PM

+1 for me on this as well..

dmhenderson 02-13-2013 10:46 PM

They're easy as hell to install. But I looked at that DIY thread and that's probably not something I could do without screwing up.

XwChriswX 02-13-2013 11:14 PM

Digitonium used to do them, and he's still here on the forum, but I can't convince him to start making them again. :icon17:

I also want a set with Red leds vs the crappy orange.

DEpointfive0 02-13-2013 11:15 PM

May I ask what people are willing to pay for the color change?

XwChriswX 02-13-2013 11:16 PM

A set of plates is roughly 150, I can't imagine it being ridiculous

dmhenderson 02-13-2013 11:18 PM

Quote:

Originally Posted by DEpointfive0 (Post 2164332)
May I ask what people are willing to pay for the color change?

Me personally? My girlfriend dented the sh*t out of my passenger side one with her "hooker boots" and I am going to replace them anyway.

Since I'm going to replace them, might as well get the color I want.

Huck 02-14-2013 08:07 AM

I'm actually planning on doing this soon, I would think ~$50 plus shipping would be reasonable. Maybe $60 total? Anybody else wanna chime in?


Sent from my iPizzle using magic and new-fangled science stuff

logenl7 02-14-2013 08:42 AM

I agree.. maybe $200/210 total for piece and labor before shipment..

dmhenderson 02-14-2013 08:45 AM

I was just going to buy them and ship them to whomever is doing the mod. Any idea who that is or will be?

Huck 02-14-2013 09:32 AM

Well if you're not in a super big hurry, and digitonium doesn't respond soon, you can send them to me. I know HOW to do it, I just want to do my own first so I have the EXPERIENCE doing it, and you guys will be able to see my finished product.


Sent from my iPizzle using magic and new-fangled science stuff

eastwest2300 02-14-2013 09:47 AM

Its probably a pain in the azz to switch colors, thats why its hard finding people to do it.

Mitco39 02-14-2013 09:57 AM

Quote:

Originally Posted by dmhenderson (Post 2164337)
Me personally? My girlfriend dented the sh*t out of my passenger side one with her "hooker boots" and I am going to replace them anyway.

Since I'm going to replace them, might as well get the color I want.

I hope she looked good while denting them at least :icon17:

eastwest2300 02-14-2013 10:10 AM

Quote:

Originally Posted by Mitco39 (Post 2164706)
I hope she looked good while denting them at least :icon17:

:roflpuke2:

Huck 02-14-2013 10:45 AM

Quote:

Originally Posted by Mitco39 (Post 2164706)
I hope she looked good while denting them at least :icon17:

:iagree: :worthless:


Sent from my iPizzle using magic and new-fangled science stuff

eastwest2300 02-14-2013 10:54 AM

Quote:

Originally Posted by Huck (Post 2164786)
:iagree: :worthless:

dude, you guys are a mess..:p

dmhenderson 02-14-2013 10:57 AM

Yeah it was difficult conversation to have "so uh, could you not step on the part of my car made for stepping on while you're wearing those"

Mitco39 02-14-2013 11:03 AM

Quote:

Originally Posted by dmhenderson (Post 2164810)
Yeah it was difficult conversation to have "so uh, could you not step on the part of my car made for stepping on while you're wearing those"


I have a problem with mine slamming the car and truck doors. They are not easy to train. haha

eastwest2300 02-14-2013 11:08 AM

Quote:

Originally Posted by Mitco39 (Post 2164819)
I have a problem with mine slamming the car and truck doors. They are not easy to train. haha

Dont you just hate that sh1t, its like, dude..it doesnt take much force to close the door, you dont have to slam it.. wtf.

Mitco39 02-14-2013 11:29 AM

Quote:

Originally Posted by eastwest2300 (Post 2164830)
Dont you just hate that sh1t, its like, dude..it doesnt take much force to close the door, you dont have to slam it.. wtf.

I think she figures it makes up for her small size? I dunno. I can say this stuff because there is no way she will come on this site :happydance:

eastwest2300 02-14-2013 11:43 AM

Quote:

Originally Posted by Mitco39 (Post 2164868)
I think she figures it makes up for her small size? I dunno. I can say this stuff because there is no way she will come on this site :happydance:

:bowrofl::bowrofl:

You know what i do is, i usually lean over to the passenger side, and catch the door so it cant slam up against the car..:tup:

That kinda sh1t annoys the hell outta me though.

Gauge 02-14-2013 01:59 PM

Not willing to pay for a color change but a custom logo/cutout definitely.

dmhenderson 02-14-2013 02:59 PM

Like what?

DIGItonium 02-14-2013 03:07 PM

I'm going to chime in. I modded one set for a member here, and he loved it. Labor-wise, it was a pain!

The aluminum pieces are terrible. The clear coat is fragile and easily develops spider web cracks. The plate is as fragile as tin foil. It is easy to blemish and difficult to straighten out once bent. It is affixed to the kick plate with automotive grade double sided tape. So one either needs to heat things up or use a flat butter knife to separate the pieces without flexing the aluminum parts so much.

The LED portion is plexiglass, and it is sealed with RTV. The LEDs are surface mount - possibly 0805 size.

The painful part of this mod is separating the aluminum piece and scrubbing off the old double sided tape and silicone.

dmhenderson 02-14-2013 03:13 PM

Yeah so I'll buy a 2nd pair if someone wants to change them to red for me. I'll even give you a prepaid UPS shipping label to send them back to me.

DEpointfive0 02-14-2013 04:03 PM

I PM'd you guys

stevent85 02-14-2013 08:51 PM

Quote:

Originally Posted by eastwest2300 (Post 2164892)
:bowrofl::bowrofl:

You know what i do is, i usually lean over to the passenger side, and catch the door so it cant slam up against the car..:tup:

That kinda sh1t annoys the hell outta me though.



Haha or you could do what i do and open and close the door for her. Save yourself the pain of slamming doors.....and if you do it in front of a crowd you look like a badass sir. Haha plus bitches love that ****. Hahahaha

dmhenderson 02-14-2013 09:04 PM

Order on its way to your guy. For people who are wondering, there's no guarantee you'll end up with 'unmarked' kick plates. I'm doing this because I need to replace them anyway.

He's offering a REALLY cheap price to do it but you pay shipping and materials. PM for more details.

XwChriswX 02-14-2013 09:06 PM

Quote:

Originally Posted by dmhenderson (Post 2165858)
Order on its way to your guy. For people who are wondering, there's no guarantee you'll end up with 'unmarked' kick plates. I'm doing this because I need to replace them anyway.

He's offering a REALLY cheap price to do it but you pay shipping and materials. PM for more details.

I'll wait to see the finished product, but I'm interested.

DEpointfive0 02-14-2013 09:20 PM

Quote:

Originally Posted by dmhenderson (Post 2165858)
Order on its way to your guy. For people who are wondering, there's no guarantee you'll end up with 'unmarked' kick plates. I'm doing this because I need to replace them anyway.

He's offering a REALLY cheap price to do it but you pay shipping and materials. PM for more details.

You're all welcome damn you all!!! :tup:

Lol

I told you he's a good guy!!!

dmhenderson 02-14-2013 09:22 PM

Quote:

Originally Posted by XwChriswX (Post 2165868)
I'll wait to see the finished product, but I'm interested.

I'll take pictures when I receive them. I placed an order with the Z store and had them shipped directly to the guy.

eastwest2300 02-15-2013 08:07 AM

Quote:

Originally Posted by stevent85 (Post 2165808)
Haha or you could do what i do and open and close the door for her. Save yourself the pain of slamming doors.....and if you do it in front of a crowd you look like a badass sir. Haha plus bitches love that ****. Hahahaha

dude, you are sooo right, excellent answer!:bowrofl::bowrofl::bowrofl:

eastwest2300 02-15-2013 08:09 AM

Quote:

Originally Posted by dmhenderson (Post 2165912)
I'll take pictures when I receive them. I placed an order with the Z store and had them shipped directly to the guy.

I hope they turn out flawless.

dastaco 02-15-2013 08:27 AM

Question... Is it possible to have a custom logo cut in instead of the Z logo? I would slap my grandmother if I could get the Ohio State block O with a red light.

Staggered357 02-15-2013 08:40 AM

Quote:

Originally Posted by dastaco (Post 2166312)
Question... Is it possible to have a custom logo cut in instead of the Z logo? I would slap my grandmother if I could get the Ohio State block O with a red light.

We did a set on some Maxima's a few months ago... I don't see why you can't be in the next group deal... http://img.tapatalk.com/d/13/02/15/ugysada6.jpg
http://img.tapatalk.com/d/13/02/15/8ydy9ege.jpg

As long as your door sill pops out like ours does... Here is the link you can PM deadbolt and ask...

http://my7thgen.org/f220/official-illuminated-door-sills-04-12-gd-update-1-4-13-a-1132/

eastwest2300 02-15-2013 08:42 AM

I would think you could find some base kick plates, without the aluminum design, they come straight black (i know this because I have a set) cut the Z completely out, then work from there, it would take some heavy modification skills.. I would think it could be done though.

saber 02-15-2013 09:48 AM

just for a rough price point, my red IKPs are from back when Cjanik did them in 2010. i think price point-wise it was around $200, but he gave up b/c it was a royal pain in the arse to do without damaging the plates.

it actually might be in best interests to do a custom cutout! so you can just pry it open and not worry about anything because you'll be replacing with a new piece anyway.

old reference thread FWIW: http://www.the370z.com/parts-sale-pr...ates-sale.html

dmhenderson 02-21-2013 03:03 PM

Ok mine are done and on their way to me. Each side has 6 PLCC 2 LEDs in them which is apparently twice the stock size so they should be bright as hell.

The guy also said he forgot what a huge PITA they were and mine would likely be the last set he does.


All times are GMT -5. The time now is 05:10 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2