Stillen | Z-Speed | Ecutek | Tommy Kaira and more
 

Time to clear out the last remaining goodies from the Z. All parts are off of a 2016 model year. Most are removed and ready to go except where specifically noted.

There remaining items, all else sold.

OEM Nismo Springs $75

OEM tonneau cover. Tinted windows and garage kept so shouldn’t be any fading $175

Tommy Kaira shift knob.... “IF” I can get it off. Blue lock tote was my friend putting it on; taking it off not so much! $250 (don’t for



Stillen Gold 19 Row Thermostatic Oil Cooler SOLDwith custom stand-off mount. Sits up and back and runs MUCH cooler. Car ran cooler than stock even with the supercharger in summer temps. Never have heating issues again $245

Z-Speed Undertray (SOLD)
Bottom is aluminum, top (engine side) is coated with high temp copper. It’s almost not even visible but in the right light with the hood up it’s pretty cool. That said I can strip the finish easily for you just ask.

Ecutek ProECU Programming Kit (SOLD) from Specialty Z - cable, dongle, with packaging. License is non-transferable so can get from Seb for $225. The kit with license goes for $650. I’m looking for $200 so it doesn’t take much math to figure out you’re saving $$$ this way. You’re welcome ;)

Product link: https://specialtyz.com/shop/370z-g37...mming-kit.html

OEM Nismo Flares (SOLD) magnetic black $175
Still on the car until I swap wheels out

Should add these, but would need stock cats exchanged as part of the deal

Fast Intentions (SOLD) resonated downpipes even on stock exhaust these are great! You guys know all about them so don’t need me to educate you. They have titanium exhaust wrap as well that can be left on for you. Just to be clear would be looking for cash on top of cats sent to me. Will not consider offers that don’t include an exchange. Edit: it sounds like I may be getting my hands on some cats, if so I’d let the FI pipes go for $220

I have a Carbon Fibre add-on spoiler SOLD as well but with the polyurethane adhesive I installed it with I’m not so sure taking it off is the best idea - I don’t want to damage it or the factory spoiler underneath. If there is serious interest we can chat about it.

Same story with the RJM clutch pedal. SOLD I’m not so sure I wan to contort myself into swapping the stocker back but if there is genuine interest we can discuss it as well.

The front spoiler you see in the pictures is staying out as it is screwed on and don’t want to leave holes even though they’d likely never be seen. Just an eBay cheapie so don’t bother asking.

I have an extra Stillen Supercharger heat exchanger sitting in the garage if anyone happens to need one. Long shot but figured I’d put out there. $10 plus shipping and packaging. Handling is free. You like being handled don’t you!

I’m pretty sure nobody wants to deal with (or pay for) shipping wheels, however if I’m wrong let me know and we can, guess what, chat!

Shipping will have to be determined on a case by case basis. The undertray will be a bit trickier but I’ll find some appropriate packaging.

PayPal FF or 3%, plus the ride of course. I pack well and border on overkill but that’s in your best interest and mine.

Nothing is considered sold until paid in full. First come first served yadda yadda. I’m happy to discuss package pricing for multiple items. Please keep in mind I tend to price pretty much firm and fair. Lowball offers will be heckled publicly. Repeatedly

Thanks



(Pics from my phone coming shortly)

Great parts from a legit seller here. GLWS :tiphat:

Hey brother, don't be a stranger around these parts :hello:

Should add these, but would need stock cats exchanged as part of the deal

Fast Intentions resonated downpipes even on stock exhaust these are great! You guys know all about them so don’t need me to educate you. They have titanium exhaust wrap as well that can be left on for you. Just to be clear would be looking for cash on top of cats sent to me. Will not consider offers that don’t include an exchange.

Thanks! :)

How’s it going, been a while. Had been locked out and the password reset wasn’t working for the longest time over the winter. Then life sort of got in the way, and well stuff happens. Hope you and everyone else around these parts are doing well

Ecutek

We were wondering where you disappeared to. Seconded on legit and great seller. Buy his stuff. He's Canadian, so he definitely takes care of his things. Glws.

If you manage to pry off the spoiler without damage, consider it sold. It's the powertrix style one. Right?

Stolen Oil Cooler

Think I have an oil filter or two I can throw in. I’ll check

Z-Speed undertray

I need to clean this up still so apologies for the poor pictures. I’ll take some better ones after.

Thanks bud :tup:

I’m pretty sure I could get a razor blade between there and get the (yes it is Powertrix) spoiler off without incident to IT.. it’s the OEM spoiler underneath I’m concerned about. I guess worst case scenario I’d have some scratches to contend with and repaint the stocker. That’s probably not the end of the world if it came to it. Shoot me a PM and we can figure something out.

Flares, wheels etc. Pic was like a month ago (two months after we shouldn’t have had any snow left!) and hasn’t changed since. If anyone wants better or specific pictures of these or anything else just let me know and I’ll do my best to accommodate.

Welcome back Chase! :excited::excited::excited:

Consider the EcuTek sold with the Z Speed cover dibs, dibs and more dibs!!!!!

You can have a set of my spare stock cats.

Lets meet up in Red Deer for coffee and swap ... parts......need to get to Rocky to view a travel trailer in the near future

Have US cash on hand so no paypal fees.

Welcome back

PM sent

Pending on:
Ecutek
Zspeed tray (and a 2nd lined up if it doesn’t go through)

Brand and pride of spoiler?

put me 3rd in the line up for the undertray

Dibs on the ecutek if deal falls through!

It is Powertrix but I’d priced out shipping already for someone and because of the length it is oversized shipping and the online estimate was $105 so it isn’t really worth it I don’t think. If someone has a business account with UPS or whatever then it would be about 60% of that or thereabouts which is much more reasonable.

And I had a misunderstanding on a package deal so the FI Resonated Pipes ARE still available.

RJM Clutch Pedal SOLD thanks :tup:

Understandable. Well depending on how much you want to get for it, I’m interested. Been trying to get a hold of the vendor with no luck. Let me know!

Charles can be a bit difficult to get hold of but the product is worth it.

As for mine, getting the CF add-on off I’m not concerned about but think there’s a pretty good chance I’ll damage my OEM spoiler underneath in the process and have to refinish it. With that in mind it has to be worth my while, and I can’t see a number less than $200 doing that. So if someone wants it for $200 plus shipping then I’ll remove it and deal with my OEM one but for any less than that it’s just not worth mucking with.

Powertrix spoiler SOLD thanks

:hello:

How’s it going boss?

Not bad. Waiting for the streets to be cleaned. Hope things are improving for you.

:iagree::tup:

If that Z Speed cover sale falls through, I will buy it :)

Coffee was extra good this morning so knocked $30 off the oil cooler.
It is off the car. Drained and ready to go.

Ecutek still for sale?

Technically the Ecutek and ZSpeed tray aren’t paid for but I know the guy personally and it’s as good as done so consider them sold.

Mine, all mine! lol :tiphat:

How did you mount the cooler? any pics of it installed. trying to figure out that mounting bracket.

I had taken some installed pics before removing it a while back, then I got a new phone in the meantime and sold the other. I’ll check and see if they maybe ended up in the cloud or something.

But basically the standoff’s use existing mounting holes in the FPS lower road cradle (or could relocate if desired) and raise it up by around 6”. There is a small top bracket that was fabbed up that isn’t in that picture that secures the top of the cooler the the center vertical brace in front of the rad where the horn etc mount to. The difference in cooling was substantial.

You can’t see the top of it in this admittedly poor picture but should get the idea.the upper bracket in green, though would be higher up than the picture allows.

if i cant hve the undertray, i might take the oil cooler

Sure thing, just shoot me a PM with your zip and can figure it out from there. :tup:

91344

$40

PM’d about Oil cooler 👍🏼

Oil cooler sold. Thanks