|
Seriously ^ !
|
Quote:
|
Quote:
I'm buying another Maxima on Tuesday!!! 2013 Premium FULLY loaded, every damn thing it can have in... The other Platinum graphite, just gotta powdercoat my wheels gunmetal or black chrome to match |
Quote:
|
Had a spare Roderick RW6 wheel.. 20x10 so started playing with plastidip yesterday...
http://img.tapatalk.com/d/13/02/02/a8y2a4es.jpg http://img.tapatalk.com/d/13/02/02/qa7a2yry.jpg http://img.tapatalk.com/d/13/02/02/pajygeme.jpg |
Akebono's are here... Should be in Sat... I am ecstatic...
http://img.tapatalk.com/d/13/02/13/bepe6utu.jpg |
Nice. I'm excited my Wife is getting her car back from the body shop. She backed it into a pole...
|
|
Quote:
|
Yes and a buddy of mine... I followed the sticky..for the most part.... Used 400 grit sand paper to rough em up a little bit, then just two good coats of caliper blue, didn't want them to get too dark..waited about 2 hours... Then put the stickers on and two coats of clear engine enamel...have them pre-curing under a spot light for a few hours then will stick them in the oven for a bit...
Not bad for under 50$... Have to see how they hold up... If I had F-ed it up too bad... They were going to get sent to get powdercoated, but I definitely wanted to try and do them myself... I am also going to try and install them... http://img.tapatalk.com/d/13/02/13/nemy7ene.jpg |
1 Attachment(s)
My 2DSC and 4DSC
|
Nice... Had some extra paint left over...
http://img.tapatalk.com/d/13/02/15/umasu2az.jpg |
http://img.tapatalk.com/d/13/02/19/emymy2ab.jpg
http://img.tapatalk.com/d/13/02/19/ahadyvuv.jpg 2 down 2 to go... Weather got bad... |
Got all the Akebono's installed...
http://img.tapatalk.com/d/13/02/25/tydesy2e.jpg http://img.tapatalk.com/d/13/02/25/ava6useh.jpg http://img.tapatalk.com/d/13/02/25/etepa5ut.jpg Thought the CV1 would clear... But had to get a 5/16" spacer |
Impressive. What was needed outside of what's on the car and what comes with the Akebono's?
|
Quote:
|
Just finished waxing car... Smoking a black n mild jazz...http://img.tapatalk.com/d/13/02/27/8azamu4y.jpg
Love the akebono's... Got a z1 Motorsport satin badge too.. http://img.tapatalk.com/d/13/02/27/5ehegabu.jpg |
http://img.tapatalk.com/d/13/03/24/abe4yrag.jpg
Taillights smoked... http://img.tapatalk.com/d/13/03/24/uny3asas.jpg Custom floor fabricated for full size spare... http://img.tapatalk.com/d/13/03/24/pytesyde.jpg 007 and 3/8ths custom started...http://img.tapatalk.com/d/13/03/24/4ybebujy.jpg http://img.tapatalk.com/d/13/03/24/vume3ydu.jpg Fabricating space for AR 15 next... Also I ended up having to need spacers with my akebono and my Vossens..I bought a 7/16th inch (7mm) spacer for the time being but ordered a 10mm spacer from Z1, I also have the extended studs. I was wondering can I use the 10mm with my existing studs or do I need to replace them? |
^^^^^ this fücking guy, LOL
SUCH A REDNECK, I love it! You need extended studs to be safe brother! |
Quote:
|
| All times are GMT -5. The time now is 03:52 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2