First video post - Xterra

FastJew · 01-03-2010, 06:22 PM

One of my other toys and past times. Yes I have a little redneck in my blood

CBRich · 01-03-2010, 08:33 PM

Braver than me. Where is the stock intake located and have you added a snorkel?

HKYStormFront · 01-03-2010, 08:53 PM

^^^ it's pretty high up. pretty deep little puddle you found there. are you on thenewx.org?

FastJew · 01-04-2010, 07:08 PM

Yeah it's pretty high up, I have only had to clean mud out of my intake once.

No snorkel, but the video is a little misleading. The driver side never gets deeper than the tire. 6 feet to the right and I would have been swimming.

Haven't been on thenewx.org boards for a while. Name there SwissArmyX.

HKYStormFront · 01-04-2010, 08:20 PM

yea i don't traffic it much, just once in a while. i stick with clubfrontier more, LOTS of TX guys on there

Mike · 01-04-2010, 08:48 PM

nice!

better than the 86.5 hardbody I had. the VG30 alternator was on the bottom of the engine, and everytime I went mudding, which was every weekend at the time, I had to disassemble, clean and reassemble the alternator.

HKYStormFront · 01-05-2010, 06:42 AM

it's still on the bottom mike, and it's still just as exposed

FastJew · 01-05-2010, 06:35 PM

And that is why I am on my second alternator. At least the first was covered under warranty. I won't be doing much mudding from now on, warranty just expired in November and I like the challenge of trails better.

HKYStormFront · 01-06-2010, 11:25 AM

go: www.gonemoab.com

my pics from last year:

goneMOAB '09 Pics - JPMcG Photography

you won't regret it!!!

FastJew · 01-10-2010, 12:08 PM

It's amazing how quickly you can get sucked from one forum to another.

Wanted to make it to Moab last year, but it looks like this year it may actually happen. Already making my check list or wish list is more like it.

Shrock skid plates, PRG UCA's, shocks, and it appears CB's are mandatory this year.

HKYStormFront · 01-10-2010, 03:27 PM

before you buy a lift for you X as is, you may want to think about doing a titan swap from the get-go and save a lot of hassle with better results for the same or just barely more money, titan swap is FTW

FastJew · 01-10-2010, 04:22 PM

Right now all I have is spacers up front and the AAL in the rear. Sick and tired of hearing my UCA slap the strut mount when wheeling. Thanks for the info.

I'll check out what is involved in a titan swap.

HKYStormFront · 01-10-2010, 06:29 PM

if you do go that route, i recommend trying to source an M205 (titan/armada) front diff. the r180 that is stock is just not good enough. the 205 is a bolt in tho the half shafts connect differently so you will either need to use titan spindles (which are interchangeable as well) with titan hubs and brakes and wheels, or get the aftermarket shafts that convert the 205 output to the stock xterra hubs. just doing the swap will gain you about 3" of lift in the front due to the extra width and the normal angle of the arms. gives you about 6" of track width up front. the arms bolt in with no modification. PRG sells some tie rod extensions for the steering gear. everything is interchangeable. it's pretty easy to do, you just have to figure out how you want to do it. consequently, aftermarket titan control arms are bolt in as well for more down travel

j.arnaldo · 01-12-2010, 12:35 PM

My wife used to own a 2000 Xterra. All it ever saw was oil changes, and NEVER did it give her any pains. They're v-e-r-y reliable! Some old lady totalled it in 2006, so I got my better ½ a P'finder. So far, so good.

01-03-2010, 06:22 PM	#1 (permalink)
FastJew Base Member Join Date: Oct 2009 Location: Denton, TX Posts: 58 Drives: 2009/370z/TS/6MT Rep Power: 15	First video post - Xterra One of my other toys and past times. Yes I have a little redneck in my blood __________________ 09 370Z - FI TDX CBE/Stillen G3/FI HFC's are next 06 Xterra OR - 3" SL - 33" Pro-Comp MT's - Shrockworks Sliders & Rear Bumper/Tire Carrier - Stillen Cross Drilled Rotors/Pads

01-03-2010, 08:53 PM	#3 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	^^^ it's pretty high up. pretty deep little puddle you found there. are you on thenewx.org? __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

01-04-2010, 07:08 PM	#4 (permalink)
FastJew Base Member Join Date: Oct 2009 Location: Denton, TX Posts: 58 Drives: 2009/370z/TS/6MT Rep Power: 15	Yeah it's pretty high up, I have only had to clean mud out of my intake once. No snorkel, but the video is a little misleading. The driver side never gets deeper than the tire. 6 feet to the right and I would have been swimming. Haven't been on thenewx.org boards for a while. Name there SwissArmyX. __________________ 09 370Z - FI TDX CBE/Stillen G3/FI HFC's are next 06 Xterra OR - 3" SL - 33" Pro-Comp MT's - Shrockworks Sliders & Rear Bumper/Tire Carrier - Stillen Cross Drilled Rotors/Pads

01-04-2010, 08:20 PM	#5 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	yea i don't traffic it much, just once in a while. i stick with clubfrontier more, LOTS of TX guys on there __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

01-04-2010, 08:48 PM	#6 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	nice! better than the 86.5 hardbody I had. the VG30 alternator was on the bottom of the engine, and everytime I went mudding, which was every weekend at the time, I had to disassemble, clean and reassemble the alternator. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

01-03-2010, 08:33 PM	#2 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	Braver than me. Where is the stock intake located and have you added a snorkel?

01-05-2010, 06:42 AM	#7 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	it's still on the bottom mike, and it's still just as exposed __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

01-05-2010, 06:35 PM	#8 (permalink)
FastJew Base Member Join Date: Oct 2009 Location: Denton, TX Posts: 58 Drives: 2009/370z/TS/6MT Rep Power: 15	And that is why I am on my second alternator. At least the first was covered under warranty. I won't be doing much mudding from now on, warranty just expired in November and I like the challenge of trails better. __________________ 09 370Z - FI TDX CBE/Stillen G3/FI HFC's are next 06 Xterra OR - 3" SL - 33" Pro-Comp MT's - Shrockworks Sliders & Rear Bumper/Tire Carrier - Stillen Cross Drilled Rotors/Pads

01-06-2010, 11:25 AM	#9 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	go: www.gonemoab.com my pics from last year: goneMOAB '09 Pics - JPMcG Photography you won't regret it!!! __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

01-10-2010, 12:08 PM	#10 (permalink)
FastJew Base Member Join Date: Oct 2009 Location: Denton, TX Posts: 58 Drives: 2009/370z/TS/6MT Rep Power: 15	It's amazing how quickly you can get sucked from one forum to another. Wanted to make it to Moab last year, but it looks like this year it may actually happen. Already making my check list or wish list is more like it. Shrock skid plates, PRG UCA's, shocks, and it appears CB's are mandatory this year. __________________ 09 370Z - FI TDX CBE/Stillen G3/FI HFC's are next 06 Xterra OR - 3" SL - 33" Pro-Comp MT's - Shrockworks Sliders & Rear Bumper/Tire Carrier - Stillen Cross Drilled Rotors/Pads

01-10-2010, 03:27 PM	#11 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	before you buy a lift for you X as is, you may want to think about doing a titan swap from the get-go and save a lot of hassle with better results for the same or just barely more money, titan swap is FTW __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

01-10-2010, 04:22 PM	#12 (permalink)
FastJew Base Member Join Date: Oct 2009 Location: Denton, TX Posts: 58 Drives: 2009/370z/TS/6MT Rep Power: 15	Right now all I have is spacers up front and the AAL in the rear. Sick and tired of hearing my UCA slap the strut mount when wheeling. Thanks for the info. I'll check out what is involved in a titan swap. __________________ 09 370Z - FI TDX CBE/Stillen G3/FI HFC's are next 06 Xterra OR - 3" SL - 33" Pro-Comp MT's - Shrockworks Sliders & Rear Bumper/Tire Carrier - Stillen Cross Drilled Rotors/Pads

01-10-2010, 06:29 PM	#13 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	if you do go that route, i recommend trying to source an M205 (titan/armada) front diff. the r180 that is stock is just not good enough. the 205 is a bolt in tho the half shafts connect differently so you will either need to use titan spindles (which are interchangeable as well) with titan hubs and brakes and wheels, or get the aftermarket shafts that convert the 205 output to the stock xterra hubs. just doing the swap will gain you about 3" of lift in the front due to the extra width and the normal angle of the arms. gives you about 6" of track width up front. the arms bolt in with no modification. PRG sells some tie rod extensions for the steering gear. everything is interchangeable. it's pretty easy to do, you just have to figure out how you want to do it. consequently, aftermarket titan control arms are bolt in as well for more down travel __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

01-12-2010, 12:35 PM	#14 (permalink)
j.arnaldo Banned Join Date: Oct 2009 Location: Puerto Rico Posts: 937 Drives: Nissan 350Z, 2004 Rep Power: 0	My wife used to own a 2000 Xterra. All it ever saw was oil changes, and NEVER did it give her any pains. They're v-e-r-y reliable! Some old lady totalled it in 2006, so I got my better ½ a P'finder. So far, so good.