STANT InStant Fill PN 41004 Gas Cap

bucknakedru · 09-09-2009, 10:20 PM

Quote:

Originally Posted by ZKindaGuy

Those people concerned about water aren't getting the FACT that the install and care directions indicate not to spray water DIRECTLY AT THE gas cap. The key word for those folks is "".

DIRECTLY - In a direct line, way, or manner; straight to.

Who would do that anyway?

g96818 · 09-10-2009, 03:56 AM

Quote:

Originally Posted by bucknakedru

Who would do that anyway?

you'd be surprised. someone will prolly do it just and post something saying water got in the tank during a fill after a car wash.

Modshack · 09-10-2009, 09:21 AM

Quote:

Originally Posted by g96818

you'd be surprised. someone will prolly do it just and post something saying water got in the tank during a fill after a car wash.

You're probably right..There are some guys here who arent exactly rocket scientists...

dszombiex · 09-10-2009, 09:36 AM

So I looked this up on Amazon and it says not for use in California?

"Does not work with all gas hoses, not for use in CA, OR, WA"

Anyone know why this is the case? Are our nozzles too big or something (hehehe I said nozzle)?

kdo2milger · 09-10-2009, 09:42 AM

^^i took this from their help page...

"Note: Not recommended with vapor hooded nozzles. On hooded nozzles you may need to hold the nozzle in position to refuel properly or remove the cap and refuel without using the InStant Fill cap.

Note: If you are having difficulty, you may remove the cap and refuel without using the InStant cap.

Warning: Do not spray this cap directly with a stream of water. This may allow water to enter the fuel system.

Questions? 1-800-822-3121."

didnt say anything about state usage...i would call the 1-800 number and ask them...

Stant

dszombiex · 09-10-2009, 09:45 AM

Quote:

Originally Posted by kdo2milger

^^i took this from their help page...

"Note: Not recommended with vapor hooded nozzles. On hooded nozzles you may need to hold the nozzle in position to refuel properly or remove the cap and refuel without using the InStant Fill cap.

Note: If you are having difficulty, you may remove the cap and refuel without using the InStant cap.

Warning: Do not spray this cap directly with a stream of water. This may allow water to enter the fuel system.

Questions? 1-800-822-3121."

didnt say anything about state usage...i would call the 1-800 number and ask them...

Stant

Ok yeah its our lame vapor hooded nozzles. This state sucks ***. I hate it so much. +1 for you.

Modshack · 09-10-2009, 09:45 AM

Quote:

Originally Posted by dszombiex

"Does not work with all gas hoses, not for use in CA, OR, WA"

Anyone know why this is the case? Are our nozzles too big or something (hehehe I said nozzle)?

Doesn't like the "Hooded" vapor recovery style of Nozzle..

Info from the instruction sheet here: Stant

09-10-2009, 09:42 AM	#5 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 61	^^i took this from their help page... "Note: Not recommended with vapor hooded nozzles. On hooded nozzles you may need to hold the nozzle in position to refuel properly or remove the cap and refuel without using the InStant Fill cap. Note: If you are having difficulty, you may remove the cap and refuel without using the InStant cap. Warning: Do not spray this cap directly with a stream of water. This may allow water to enter the fuel system. Questions? 1-800-822-3121." didnt say anything about state usage...i would call the 1-800 number and ask them... Stant __________________ Project *NISMO*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where are you going to fill up?	Ace	Canada	46	05-20-2010 11:50 AM
Fill it to full.?	Chan Chee Hoe	Nissan 370Z General Discussions	16	06-06-2009 02:28 AM
Factory-Fill Oil Analysis Results	ZzzZz	Nissan 370Z General Discussions	0	03-17-2009 01:33 AM

09-10-2009, 09:36 AM	#4 (permalink)
dszombiex Base Member Join Date: May 2009 Location: Los Angeles Posts: 230 Drives: 09 370z MB 7AT Rep Power: 376	So I looked this up on Amazon and it says not for use in California? "Does not work with all gas hoses, not for use in CA, OR, WA" Anyone know why this is the case? Are our nozzles too big or something (hehehe I said nozzle)?