Adding oil cooler problem on 2014

gurneyeagle · 02-08-2014, 10:58 AM

Quote:

Originally Posted by helidriver

The factory size will fit.

I checked back with my buddies who were having a similar discussion a while back, and the standard oil filter fits fine. You may just need a different filter wrench.

DLo · 02-08-2014, 02:13 PM

I encountered the same issue on my 2012. Just install on top of the existing cooler. The tolerances will be tighter and the lines will run slightly different from the Z1 instructions, but it all works fine with the stock size oil filter. No need to mess with the existing cooler. My 34 row has been running flawlessly ever since.

edub370 · 02-08-2014, 03:01 PM

Quote:

Originally Posted by SunsetZ

Finally got around to installing my Z1 Motorsports/Setrab 34 row oil cooler, and guess what, it won't work on my 2014. Seems my car has an extra collar like thing on the side of the oil pan where the filter attaches. This takes up about two inches and make it impossible to get a wrench on the filter to loosen or tighten.
screen shot capture

sounds like u try to use one of these to take your filter off

which is, by far, the most cumbersome way to take off a filter. if thats your only issue, why dont u just start using one of these to take it of?

or

seems like a pretty simple fix to a pretty simple problem

02-08-2014, 02:13 PM	#17 (permalink)
DLo Base Member Join Date: Jul 2012 Location: SoCal - South Bay Posts: 244 Drives: 2012 370Z NISMO GM Rep Power: 14	I encountered the same issue on my 2012. Just install on top of the existing cooler. The tolerances will be tighter and the lines will run slightly different from the Z1 instructions, but it all works fine with the stock size oil filter. No need to mess with the existing cooler. My 34 row has been running flawlessly ever since. KaienZ34 and onzedge like this. __________________ 2012 NISMO #294 Gunmetal Metallic - Stock