Rubber isolators starting to come off?

supraman626 · 08-18-2009, 03:44 AM

Has anyone been experiencing the rubber isolators starting to pop out more? I'm thinking it could be the headlights not aligned properly with the front fender causing it to move upwards a bit. This is only one side of the headlight.

rudi · 08-18-2009, 04:15 AM

I just noticed the exact same thing this weekend when washing the car.

rudi · 08-18-2009, 05:06 AM

Is this the problem your describing?

Diversion · 08-18-2009, 08:59 AM

Yep, one of mine is doing it too, except that after I blacked out my headlight housings, I fixed it upon reseating the headlights into the car. I assume it'll come creeping back up.

LattimerII · 08-18-2009, 03:15 PM

I assume one could just push this back down with something soft enough not to worry about scratching the paint, correct?

supraman626 · 08-18-2009, 03:51 PM

that's exactly what i'm talking about. I tried to push it back in, but it seems like i would have to remove the headlight to do that. i'll probably just leave it alone and hope it doesn't completely come off. I'm sure it's cheap to purchase one but just bothers me that the Z has so many minor issues.

CCCLXXZ · 08-18-2009, 04:18 PM

can someone post a summary as I am not following completely, I am assuming that there are these little pads that are between the headlight housing and the fenders?

Thanks,

Just want to keep an eye out as it seems odd to have these there in the first place.

rudi · 08-18-2009, 04:21 PM

I'm going to leave mine till the next service and have it fixed by the dealer, plus a few other issues. No big deal, these things happen.

zylont · 08-18-2009, 07:14 PM

The one on my driver's side head light come completely out a while ago.

rudi · 08-18-2009, 07:20 PM

Quote:

Originally Posted by zylont

The one on my driver's side head light come completely out a while ago.

Did you replace it or does it not pose any issues?

NeedforZ · 08-18-2009, 09:14 PM

Quote:

Originally Posted by rudi

Is this the problem your describing?

YES! Both of my headlights now have those rubber tabs poking up. Tried to push them back down without success.

Pushing_Tin · 08-18-2009, 09:42 PM

Mine is an early build #1208 and it's fine.

Trips · 08-19-2009, 04:04 AM

Looks like people with these cosmetic issues need to visit there local dealer and ask why and for them to fix it. I have a January build and have not seen these issues yet. I will keep these in mind if it happens.

need4speed · 08-19-2009, 05:12 AM

Quote:

Originally Posted by supraman626

that's exactly what i'm talking about. I tried to push it back in, but it seems like i would have to remove the headlight to do that. i'll probably just leave it alone and hope it doesn't completely come off. I'm sure it's cheap to purchase one but just bothers me that the Z has so many minor issues.

These are the type of small annoyances that you need to report at your dealership while getting your oil changes. These are warranteed issues that you don't have to worry about.
Plus making the complaint will make nissan make a better fitting isolator.

This is y buying 1st year sucks!
Glad I chose to wait for 40th anniversary Z!

08-18-2009, 03:44 AM	#1 (permalink)
supraman626 Base Member Join Date: Feb 2009 Location: sf, ca Posts: 58 Drives: 09 Nissan 370z PW M6 Rep Power: 16	Rubber isolators starting to come off? Has anyone been experiencing the rubber isolators starting to pop out more? I'm thinking it could be the headlights not aligned properly with the front fender causing it to move upwards a bit. This is only one side of the headlight.

08-18-2009, 08:59 AM	#4 (permalink)
Diversion Enthusiast Member Join Date: Apr 2009 Location: Jacksonville, Florida Posts: 393 Drives: 09 370Z Silver/Persi Rep Power: 284	Yep, one of mine is doing it too, except that after I blacked out my headlight housings, I fixed it upon reseating the headlights into the car. I assume it'll come creeping back up. __________________ 09 370Z Touring + Sport + Nav (Status Elite Intakes) (Berk HFCs) (Invidia Q300 CBE) (Nismo Swaybars) 99 Civic Si (Daily Driver, completely unmolested stock rarity)

08-18-2009, 04:18 PM	#7 (permalink)
CCCLXXZ Base Member Join Date: May 2009 Location: Chicago Suburbs Posts: 164 Drives: T/S/MB/6 370z Rep Power: 400	can someone post a summary as I am not following completely, I am assuming that there are these little pads that are between the headlight housing and the fenders? Thanks, Just want to keep an eye out as it seems odd to have these there in the first place. __________________ Mods - Maxim Works Exhaust Manifold, FI HFC, Mines Y-Pipe, Saclam Silencer

08-19-2009, 04:04 AM	#13 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Looks like people with these cosmetic issues need to visit there local dealer and ask why and for them to fix it. I have a January build and have not seen these issues yet. I will keep these in mind if it happens. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Omg...at last. Starting to lose sleep.	tbonesteak	Nissan 370Z General Discussions	20	07-20-2009 10:25 PM
Rubber Choices	jasonhoutx	Wheels & Tires	1	06-25-2009 04:10 PM
Need Some Help Starting Out	AlmtyBob	Audio & Video	10	05-05-2009 07:56 PM
GM launches Total Confidence Program starting April 1	frost	Other Vehicles	3	03-31-2009 06:05 PM
Starting negotiations!!!	kustomZ	Nissan 370Z Pricing / Ordering Discussions	10	03-11-2009 11:25 AM

08-18-2009, 04:15 AM	#2 (permalink)
rudi Enthusiast Member Join Date: Jun 2009 Location: Australia Posts: 306 Drives: 370Z Australian Spec Rep Power: 15	I just noticed the exact same thing this weekend when washing the car.

08-18-2009, 03:15 PM	#5 (permalink)
LattimerII Base Member Join Date: Jun 2009 Location: US Posts: 52 Drives: 09 PG 370Z Sport Pkg Rep Power: 15	I assume one could just push this back down with something soft enough not to worry about scratching the paint, correct?

08-18-2009, 03:51 PM	#6 (permalink)
supraman626 Base Member Join Date: Feb 2009 Location: sf, ca Posts: 58 Drives: 09 Nissan 370z PW M6 Rep Power: 16	that's exactly what i'm talking about. I tried to push it back in, but it seems like i would have to remove the headlight to do that. i'll probably just leave it alone and hope it doesn't completely come off. I'm sure it's cheap to purchase one but just bothers me that the Z has so many minor issues.

08-18-2009, 04:21 PM	#8 (permalink)
rudi Enthusiast Member Join Date: Jun 2009 Location: Australia Posts: 306 Drives: 370Z Australian Spec Rep Power: 15	I'm going to leave mine till the next service and have it fixed by the dealer, plus a few other issues. No big deal, these things happen.

08-18-2009, 07:14 PM	#9 (permalink)
zylont Base Member Join Date: Mar 2009 Location: Tampa Posts: 77 Drives: 09' PG 370Z Rep Power: 16	The one on my driver's side head light come completely out a while ago.

08-18-2009, 09:42 PM	#12 (permalink)
Pushing_Tin A True Z Fanatic Join Date: Nov 2008 Location: Eugene, OR Posts: 2,875 Drives: E63 AMG Rep Power: 227	Mine is an early build #1208 and it's fine.