Need Advise.... :-/
 

Hey all,

I want to add an Oil Pressure gauge to the Z. But dont know where to mount it, I dont like the Idea or the way it looks to mount it up on the dash. So can someone come up with some Ideas for me? Thanks:tiphat:

rip out the clock and put it in the 3-gauge.

Thought about it but dont want to tear up the dash...:ugh2:

You could have a custom A-pillar fabricated. A lot of FI guys put their boost gauge there. Galeforce on the forum actually makes them himself. You might PM him :tup:

Really? Hmm ill hit him up thanks.

You can put it in the cubby if you have the base

No I would like to be able to see it at a glance, Thanks for your input tho...:tiphat:

even if there's more work involved, i think at the end, you will be most happy with the gauge where the clock is. and just get a HU with clock.

Aren't those 3 gauges all 1 piece? You have to replace all 3 if you want to replace 1 right?

I'm thinking your right, can anyone verify This?

Advise or Advice?

Well Shi*..... Advice.

Yep. I used to be pissed about it, until it dawned on me that I could give a rat's *** about the volt meter, so even if they were removeable individually I'd still be replacing two out of the three. At that point, it wouldn't bother me nearly as much to buy a new oil temp gauge for the third spot.

did u check the DIY link i posted? they are separate pieces.

DIY section rocks!!!:tup:

yah, i hope the op puts it to good use. :tup:

I'm going to put that one to use. I didn't want to tear up my dash either and didnt know there was another way. You just made my day Kenchan. :excited:

well, i just linked it, give reps to the guy that actually made the DIY. :tup:

This^ Its good advice.

They definitely are not.lol But hey I didn't just take mine out last weekend..Maybe they were on the earlier 370s?

no idea, just linking a DIY that shows they are separate pieces.

Its all good. Just warning the OP to not be surprised if he goes in there and is like holy crap they are all one piece.

You have to swap all of the gauges...which is worth it for the boosted folks.

The DIY shows that the hoods and bezels are separate pieces. The guts are all one peice in the linked post. It's mentioned right at the top.

Yup one pice,

How about C0ck?

Sent from my SPH-L710 using Tapatalk 2

Yes, also an option.

OP, I seem to have messed up my first post, let me retry.

Advise, advice, or C0ck*?


*full credit goes to ///swanky for pointing out my omission.

No problem! :) Wanted to stop by and enlighten you guys with my 2 cents for what its worth.

Sent from my SPH-L710 using Tapatalk 2