Nissan 370Z Forum - Car wont start.

Page 3 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)

- - Car wont start. (http://www.the370z.com/nissan-370z-general-discussions/67809-car-wont-start.html)

VCuomo

03-06-2013 01:09 PM

Quote:

Originally Posted by Garrett63 (Post 2199289)

Gah dammit im trying to pull the damn fuse today and I cant get the fuse box out. I removed all the necessary parts to make room for it to come out but after I unlock the 2 clips on the fuse box to pull it out its snagged. It feels like wires are attached to the bottom of the box that are short holding it down. Am I missing a clip on the fuse box itself?

That's what it felt like when I tried pulling the box out from my Z. Just pull the box up and when it feels like it's snagging, pull up harder and it should free up and pull out. And, of course, make sure that the clips are fully disengaged.

R0bDC

03-06-2013 01:45 PM

I really wished I would've beat the crap out of the box, I just tap it a few times.

forza370z

03-06-2013 01:59 PM

Here is a video on youtube might help little bit.

As in the pix, I just pull out the fuse box and there are two tabs at the bottom of the fusebox. Push the tabs down and hold them then try to open the box. You don't have to open the box completely to pull the fuse. Just open it slightly like I did shown in the pix. Good luck.

http://i1037.photobucket.com/albums/...psfa1b55f6.jpg

http://i1037.photobucket.com/albums/...ps75fe0ed0.jpg

Garrett63

03-06-2013 02:00 PM

1 Attachment(s)

Victory! go eff yourself pinkish red fuse from hell! Yeah I just got over my pussitis and pulled the fuse box out a little harder and there she blew.

forza370z

03-06-2013 02:04 PM

Quote:

Originally Posted by Garrett63 (Post 2199383)

Victory! go eff yourself pinkish red fuse from hell! Yeah I just got over my pussitis and pulled the fuse box out a little harder and there she blew.

:tup:

SouthArk370Z

03-06-2013 02:59 PM

Quote:

Originally Posted by Garrett63 (Post 2199289)

The big harness/cable that enters the bottom of the IPDM is probably hanging up. I was able to reach around the IPDM (toward the passenger compartment) and guide the harness around a corner, but I'm a small guy. If you can't get your arm in there, a wood dowel or other soft material should work.

All times are GMT -5. The time now is 11:48 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page