"key" light went on

cossie1600 · 11-29-2012, 11:56 AM

Yes, at $500 bucks

scgolfer7 · 11-29-2012, 12:06 PM

Freeing it up is the best bet, don't get shy when it comes to hitting the unit itself (just think about the $500 you might have to spend, that should allow you to hit it hard enough.) With a little patience it should free right up and then you can pull the fuse/cut the wire to your heart's content.

LMBmikeZ · 11-29-2012, 12:31 PM

Quote:

Originally Posted by fullmonty

Unfortunately unless you can get the lock freed up, pulling the fuse or cutting power to the unit at this point is useless. You're gonna need a tow to the dealer to get this fixed, shouldn't be to painful if you're still under warranty

Not only would it be useless, it would be damaging if you cut the wire! you would then have to reconnect the wires in order to get the new one to unlock so you could then disable it again in the unlocked position!

scgolfer7 · 11-29-2012, 12:34 PM

Quote:

Originally Posted by LMBmikeZ

Not only would it be useless, it would be damaging if you cut the wire! you would then have to reconnect the wires in order to get the new one to unlock so you could then disable it again in the unlocked position!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PIC request: Anyone use "smoke" spray to blackout breaklight/rear fog light?	370Zvetlana	Exterior & Interior	11	02-10-2022 05:31 PM
"Service engine soon" light	import111	Engine & Drivetrain	71	06-28-2016 11:57 PM
Just got "Service Engine Soon" light..	dcrew1x	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	9	02-15-2012 06:38 PM
Question about the Euro Spec. rear "Fog Light"	Arizona Z	Exterior & Interior	7	03-26-2010 08:01 AM
Any Update on the "Rear Fog Light"	Arizona Z	Nissan 370Z General Discussions	4	05-09-2009 11:21 PM

11-29-2012, 11:56 AM	#1 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 31	Yes, at $500 bucks

11-29-2012, 12:06 PM	#2 (permalink)
scgolfer7 Base Member Join Date: Oct 2012 Location: Tulsa, OK Posts: 59 Drives: 09 Z Yellow 6MT Rep Power: 14	Freeing it up is the best bet, don't get shy when it comes to hitting the unit itself (just think about the $500 you might have to spend, that should allow you to hit it hard enough.) With a little patience it should free right up and then you can pull the fuse/cut the wire to your heart's content.