best floor jack for working on front and rear of 370z

Ubetit

I have an Omega Jack with a long arm and only 2.5 inch saddle height. Bottom-line pricing on Omega 29023 at ToolTopia.com

gsxr750

I picked up a long reach low profile floor jack from harbor freight for $129 , must weigh 150lbs. and I'm making 2 cheap wood ramps from home depot.

Actully a small scissor jack modified with a small 3" diameter steel plate on top and a larger base plate attached , would do the best lift for the front as you wouldn't need the ramps.

I found a larger scissor jack that only has a 4.75" folded height that would work great, with a large top and bottom plate, but sadly, it was only meant for height adjustment on RV's and Mobile Homes, the problem was the screw or gear reduction , didn't allow it to be used as a jack, you could only use it once the trailer was jacked up by a real jack.

It sicks that you can't get a large quality scissor jack anymore, my brother has one from the 80's that is a exactly what you need for lifting a car like the Z

Felix 808

Because they are down right dangerous. They have a very small base & can be tipped over too easy, especially when raised to it's limit. OP has the right idea with the listed jack. Low profile, high lift & very stable. Always use jack stands or ramps once lifted to desired height.

__________________
Semper Fi

Μολὼν λαβέ

Felix 808

This is the jack I thought was being talked about.
It is very good with the attributes I stated earlier

Low Profile Floor Jack - 2 Ton, Rapid Pump® Jack

__________________
Semper Fi

Μολὼν λαβέ

Baer383

I use these after driving on a piece of wood.

RakJak™ 2-Ton Car Air Jack - GEMPLER'S

__________________
2013 ZL1

754 rwhp 747 rwtq

SurfDog

i like woopie copuishions too but i thought we were talking about jacks...

__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

Baer383

__________________
2013 ZL1

754 rwhp 747 rwtq

Alstann

^This.

I have this jack as well, and it is absolutely the best money spent on a jack, bar none. Yes, it is a harbor freight jack, but I have had one for over a year, and it works as smooth as butter. I have not seen a lower profile jack than this one, nor one that lifts as high. Pair this jack with a hockey puck for jack point protection, and you are perfect.

__________________

Mandingo

I have this jack and its great! Its been solid through many projects on multiple cars. Ordered from Harbor Freight.

__________________
some mods

gomer_110

Also an owner of this jack and it does a great job.

If you have buckets of money just sitting around you could always get this:
Dannmar: MaxJax

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock