Originally Posted by alcheng (Post 1803563)

hey happy, did you buy that set of wheel-lock?

Originally Posted by kenchan (Post 1803436)

:tup: sounds good! i think these project based work keeps us on our toes to do a great job each and every time. :p

the daily grind... that's like you can do a great job but someone else will often times screw it up for you, so just do decent work that matches the pay. :icon17:

btw, mr.gale - i ordered up a lapel mic to play with. let me find the mic...

Originally Posted by kenchan (Post 1803496)

mr.gale- here's the lapel mic. my buddy insisted i try this on the gopro as his buddies were getting good audio. i dont know if it can withstand our car environments as our application is pretty loud... will find out running my HU test. :)

it is unfortunately a mono mic that comes with a stereo (tip ring sleeve) connector. since it uses a LR44 button battery like your audiotechnica pro24 i will need to remember to turn it on/off each time. :icon17:

i dont know how many sessions i can get out of one battery nor does the mic have a LED indicator showing whether there's enough juice or not. LOL :facepalm: will find out tomorrow.

Amazon.com: Audio-Technica ATR-3350 Lavalier Omnidirectional Condenser Microphone: Musical Instruments

Originally Posted by GaleForce (Post 1803671)

Good morning guys. I'm getting ready for my drive to "work" :icon14:

Have a great day :tup:

Originally Posted by kenchan (Post 1803427)

hey luna- looks great! :tup: i like how your installer wrapped all the way to the bottom of the rear valance so that you dont see any of the white. :)

Originally Posted by happytheman (Post 1803467)

That looks great LunaZ! How long did it take to do it all? Your ride is looking cleaaaan!

Originally Posted by Fire (Post 1803473)

Luna is once again lookin sweet. Nice of you to let him use your industrial hair dryer :tup:

Originally Posted by GaleForce (Post 1803671)

Good morning guys. I'm getting ready for my drive to "work" :icon14:

Have a great day :tup:

Originally Posted by happytheman (Post 1803691)

Good morning all! :hello: Pulling out the Z in T minus one hour! :excited:

Originally Posted by kenchan (Post 1803696)

Hahaha, gmorning mr.gale! Have fun at work. :tup:

Goodam everyone! :hello:

Originally Posted by LunaZ (Post 1803698)

:roflpuke2:

Originally Posted by LunaZ (Post 1803698)

That was the part that took two people!
Two hands are not enough for stretching, holding the heat gun and moving the exhaust out of the way ;)



The front and B-pillars took an hour. Then we went to the pub before tackling the back. Customers came in and we drank another beer and shot the ****. It took all day :rolleyes:



:roflpuke2:

Originally Posted by happytheman (Post 1803691)

Good morning all! :hello: Pulling out the Z in T minus one hour! :excited:

Originally Posted by kenchan (Post 1803696)

Hahaha, gmorning mr.gale! Have fun at work. :tup:

Goodam everyone! :hello:

Originally Posted by JARblue (Post 1803738)

Early bird! :tup:

:hello: Goddamn Goodam Y'all! :icon17:

Happy 4th of July Eve!

Originally Posted by LunaZ (Post 1803698)

The front and B-pillars took an hour. Then we went to the pub before tackling the back. Customers came in and we drank another beer and shot the ****. It took all day :rolleyes:

Originally Posted by happytheman (Post 1803829)

Sounds about like the shenanigans I would get into! :tup: Got any interior bits planned for wrapping (or did you do that already)? Looks great man! I need to do something with my B pillars, as one of them has a nasty scratch on it. :(

Hey....what's everybody doing tomorrow? Who's having a cookout that I can crash?

Originally Posted by happytheman (Post 1803829)

Sounds about like the shenanigans I would get into! :tup: Got any interior bits planned for wrapping (or did you do that already)? Looks great man! I need to do something with my B pillars, as one of them has a nasty scratch on it. :(

Hey....what's everybody doing tomorrow? Who's having a cookout that I can crash?

Originally Posted by onzedge (Post 1803804)

Good morning from the Northern Sacramento Valley farmlands!!!

:tiphat:

Originally Posted by happytheman (Post 1803829)

Sounds about like the shenanigans I would get into! :tup: Got any interior bits planned for wrapping (or did you do that already)? Looks great man! I need to do something with my B pillars, as one of them has a nasty scratch on it. :(

Hey....what's everybody doing tomorrow? Who's having a cookout that I can crash?

Originally Posted by kenchan (Post 1803838)

good morning, mr.onzedge! :tup: (from the midwest fat cow fat middle aged woman farmland of grease :ugh2:)

Originally Posted by LunaZ (Post 1803842)

Yeah, the B-Pillars are literally 10 minutes each.
As far as the insides go, I might start popping off bits and sending them to kenchan for wrapping :tup:

Originally Posted by onzedge (Post 1803843)

Ah yes... the midwest. Where the men are men and the sheep run scared. :icon17:

Originally Posted by kenchan (Post 1803852)

:icon17: hahaha. you should try it. it's really not that hard to do. just burns your fingers and thumbs at times :ugh2:




:icon18: hahahahaha. i remember working retail when i was a kid and some asian guy with his girl that came from the west coast was complaining to me that our town is f-king boring. i told him, hey arsehole, go back to your country. :icon17: hahaha. he looked at me in disbelief. :tup:

Originally Posted by Pintsize725 (Post 1803851)

Morning guys! Had a very spirited drive into work this morning. :tup:

Originally Posted by onzedge (Post 1803860)

:tiphat: Howdy, ma'am.

Originally Posted by GaleForce (Post 1803928)

Hi Mr. Kenchan, Jar, Ms. Pint, Mr. Onzedge. :hello:

I'm sweating in places I did't know I had. Working in in the plant with +90° heat in full coveralls and additional Kevlar sleeves. I'm too delicate for this. lol

Originally Posted by LunaZ (Post 1803842)

Yeah, the B-Pillars are literally 10 minutes each.
As far as the insides go, I might start popping off bits and sending them to kenchan for wrapping :tup:

Originally Posted by Pintsize725 (Post 1803851)

Morning guys! Had a very spirited drive into work this morning. :tup:

Originally Posted by kenchan (Post 1803852)

:icon17: hahaha. you should try it. it's really not that hard to do. just burns your fingers and thumbs at times :ugh2:

Originally Posted by happytheman (Post 1804084)

Good morning Ms. Pint! :hello: How's the Z running? Did you get those issues sorted out with the airbox, leak and misfire?

-------------------------------------------------

Wow! :eek: Tiajuana Flats just got slammed with people in the front door! Looks like I showed up just in time! :eek:

Originally Posted by GaleForce (Post 1803928)

Hi Mr. Kenchan, Jar, Ms. Pint, Mr. Onzedge. :hello:

I'm sweating in places I did't know I had. Working in in the plant with +90° heat in full coveralls and additional Kevlar sleeves. I'm too delicate for this. lol

Originally Posted by happytheman (Post 1804093)

You know, I've often thought of doing carbon on my b pillars, but feel like I would need to dedicate additional surface to it (such as fangs, valance, wig and etc.) for it all to tie together. :confused:

What say you on that front?

Originally Posted by happytheman (Post 1804110)

:icon18:

Originally Posted by Pintsize725 (Post 1804128)

I did get the airbox leak fixed. They never did the sending unit and said the ticking noise was just injector noise.

Originally Posted by kenchan (Post 1804137)

i was not aware injectors made audible ticking noises...

Originally Posted by kenchan (Post 1804136)

yah, you'll definitely need to wear a wig if you do the b-pillars, but nothing else. :icon17:

Originally Posted by happytheman (Post 1804162)

A wig? Not sure i get the reference, but I'll take a stab at it: Would that make me a "wigger" then? :eek: :rofl2:

Originally Posted by happytheman (Post 1804093)

You know, I've often thought of doing carbon on my b pillars, but feel like I would need to dedicate additional surface to it (such as fangs, valance, wig and etc.) for it all to tie together. :confused:

What say you on that front?

Originally Posted by kenchan (Post 1804222)

my mic arrived. :tup: will test tonight.