Nissan 370Z Forum
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   Nissan 370Z (http://www.the370z.com/nissan-370z-general-discussions/50268-nissan-370z.html)

UNKNOWN_370 02-27-2012 10:08 AM
Quote:
Originally Posted by AK370Z (Post 1565995)
Where are you going with this? for satisfaction? or research?

I know it's build in Tochigi Japan. It was designed by Randy Rodriguez in California. Then that design sketch was taken to Japan and there the design was finalized (Randy received a copy of the final design and was asked what he thought of it. He obviously gave it a :tup:).

Car is built 100% in Japan. If you add options like illuminated kickplates or splash guards or other small options, they are sometimes installed at the port/local dealer etc. These cars are fully built and shipped to us. NO parts are built or modified or installed in United states. Just like the GTR :driving:
:iagree:

kenchan 02-27-2012 10:11 AM
i would say insprired by randy's rendering. you cant design a car from just an illustration.

stevenlucksek 02-27-2012 01:06 PM
370z
 
I think 370Z is one of the best iconic sports car because it shows to the world that 370Z is a global car that is design by a team that are multinational and countless of people all around the world within Nissan. So everybody have contributed from it which is a good idea. And also it is first inspired by 240Z which have a strong Japanese root in design.

what do u guys think?

kenchan 02-27-2012 01:09 PM
nissan is run by french guy who likes Z.

stevenlucksek 03-04-2012 06:59 PM
Hi all,

Sorry to ask this question again and again. Because I never get the answer. So yeah, did actually any Japanese designer contribute to the exterior design of the 370Z?

Because I research Mr Kazuki Yamazaki who is in charge of the exterior design and Mr. George Yanaka who is the chief designer. This considered as a contribution right?

alcheng 03-04-2012 10:37 PM
Quote:
Originally Posted by stevenlucksek (Post 1581313)
Hi all,

Sorry to ask this question again and again. Because I never get the answer. So yeah, did actually any Japanese designer contribute to the exterior design of the 370Z?

Because I research Mr Kazuki Yamazaki who is in charge of the exterior design and Mr. George Yanaka who is the chief designer. This considered as a contribution right?
Well, it's a car from a Japanese manufacture, so the final decision must have to have some discussion with Japanese HQ, therefore, if you want to know was/were there and Japanese involved in the R&D of the Z, most likely it's a 'Yes'.

However, I think no matter who is the designer or whatever, the most important is Do you like it??

Right???

:icon17:

6MT 03-04-2012 10:45 PM
Quote:
Originally Posted by kenchan (Post 1568362)
i would say insprired by randy's rendering. you cant design a car from just an illustration.
:iagree: yep!

6MT 03-04-2012 10:48 PM
Wait, what? Nissan 370? What's that?

stevenlucksek 03-05-2012 01:46 PM
Thanks
 
I have researched and finally found some answer. The 370Z actually is designed by Mr. Randy, with countless of people contribution. All design by Randy and all the contribution from all the people within Nissan was sent to Japan. In Japan, the designer in charge of the exterior, Mr. Yamazaki, finally put all the design together and become the Z.

Thanks

kenchan 03-05-2012 03:13 PM
like i said, there's a huge difference between a rendering artist for concept design and the designer that actually puts these ideas into a tangible form... it's not fair to just name one or two people. it takes a lot more then that to design and produce a car.

for some reason this thread pisses me off. :icon17:

/thread.

alcheng 03-05-2012 03:33 PM
it's alright kenman, at least he answers his own question. :icon17:

frost 03-05-2012 03:34 PM
Quote:
Originally Posted by kenchan (Post 1582779)
like i said, there's a huge difference between a rendering artist for concept design and the designer that actually puts these ideas into a tangible form... it's not fair to just name one or two people. it takes a lot more then that to design and produce a car.

for some reason this thread pisses me off. :icon17:

/thread.
Next thing you know, you're going to be telling us it takes more than one guy to create a blockbuster movie.

LMBmikeZ 03-05-2012 05:40 PM
Unless your George Lucas or Stephen Spielberg those guys an do anything/everything!
LOL j/k! :rofl:

kenchan 03-05-2012 06:15 PM
Quote:
Originally Posted by alcheng (Post 1582811)
it's alright kenman, at least he answers his own question. :icon17:
lol, hey mr.alcheng. decided no charburger or Chinese...mexican tonight! Burritos verdes. :yum:

AlanManouk 03-05-2012 06:41 PM
I've been told it is 100% made in japan and says it on the door or side with all the curb weight info


All times are GMT -5. The time now is 02:49 AM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2