what's been your cheapest and/or most expensive mod?
 

hey guys im still trying to see what all you guys have done to your Z's and was curious to know what has been the cheapest and/or most expencive mod you have gotten for your Z.

i havent done any mods to mine, so i couldnt tell you guys what's been my most expensive or cheapest.. sorry guys:p

19xx for coil over
20 for clutch helper spring
Niether will be installed till the weekend
:shakes head:

cheapest=swift spec-r springs

most expensive will be tt

Cheapest: Clutch line

Expensive: Wheels

Stillen license plate relocation kit $100

NISMO S-Tune exhaust $1400

Expensive: Supercharger
Cheap: Headlights (Beer plus paint)

hmmm

come to think of it i guess my cheapest mod would be 10 dollar interior led lights...

By far the cheapest mod was dying the interior stitching blue. $5

And for the most expensive, well that one is easy too. GTM Twin Turbo kit. ~$9000

Cheapest is the hardest to remember

Cheapest... not sure maybe the rocker switches for the center console?
Most expensive... wheels and tires.

I don't intend to spend too much on the Z since its a great car in stock form. :)

Expensive: F.I. CBE

Cheap: Moodshack Custom Intakes

That's for now....

haha very true, it's still an awesome car in it stock form!!

i actually want to get some wheels and tires soon. i just can't seem to find any sites to get them from.

any suggestions on some sites where i can get good deals on wheels? thanks.

yah, tirerack, kamispeed, ravspec, etc.

check here: Tires/Wheels - Nissan 370Z Forum

cheapest: interior LED
Expensive: KW V3 coilover

oh wait, my future wife's diamond ring from tiffany.
I could've got TT done...sigh

simota1's gauge overlay was the cheapest mod and the TE37's were the most expensive

Forgot about that

i appreciate it kenchan!:tup:

GT-R start button...
GTM SC...

Cheapest = LED license plate bulbs -- $15.00
Most Expensive = Berk CBE = $1,150.00 (Michelins were at $1,380, but they are not really a mod)

cheapest: 180 headlights

most expensive: wheels....on my 3rd set, could have went Forced Induction by now

least expensive by far was paddle shifter bumpers 50cents then simota overlay and shorty antenna, most expensive is my suspension. read signature for mods.

Cheapest would SPC Camber Kit = $215
Expensive would be Fast Intentions Exhaust + HFC's = $1600

Cheapest: clutch helper spring
Most Expensive: wheels and tires

cheap: forum decal.
expensive: wheels/tires

cheapest - clutch helper spring $18

Most - wheels/tires $4500

cheapest------------ keyhole delete

MOst expensive------ GTM SC

Cheapest: DIY blue stitching = ~$3

Expensive: Fast Intentions CBE = $650 used

I'm cheap :D

cheap: custom front plate mount $2.

expensive: project mu bbk 6/4.

Cheapest: Shorty antenna for the Roadster ($10 or so)
Most expensive: Exoticspeed RII Titan PWR-SI CBE ($1450 shipped to AUS)

What's this stitch dye you're talking about? Is there a diy here on the forum?

Cheapest -- LEDs
Most expensive -- berk cbe

Cheapest- LED lightbulb
Expensive- ARK Exhaust


^^^^ You should of went with the TT instead of the ring

Cheapest - 20mm spacers

Most Expensive - GT HAUS CBE

Cheap - Definitely LEDs.
Expensive - Currently Wheels, soon to be taken over by the TT kit and whatnot.

cheap-tint
expensive- exhaust

Sort of: http://www.the370z.com/exterior-inte...nough-try.html

Cheapest - VLEDS followed by GTR start Button

Expensive - Fast Intentions CBE in CF

Most expensive: Coil overs at $1850 plus labor.

Least expensive: Sway bars at $575 with labor. If I ever do the back up camera it will be the cheapest.

Cheapest: Rear spoiler $220 including installation
Expensive: Berk CBE $700 (bought used and it should be shipping soon ;))

finally getting an exhaust??!!! yes!:tup: