Anybody considered Line-X or Arma in the wheel wells?

k.alexander · 02-18-2009, 01:19 PM

Could someone who actually ends up doing this, PLEASE, post some results. Thanks.

Kustom F/X · 02-18-2009, 01:24 PM

Quote:

Originally Posted by Pushing_Tin

Where is a good place to buy it?

Any auto parts store should have this or a variation of it. You can also look at paint on bed liner from Herculiner, a quart is more than enough, and costs around $35. You can apply as much or as little as you want, and no chance of over spray. This is what I used on my slammed truck and it works GREAT. Just my .02

Nikon FM · 02-18-2009, 01:32 PM

Quote:

Originally Posted by SoCal 370Z

Here is what you are looking for: 3M™ Underseal™ Rubberized Undercoating, 08883

Take off your rear wheel, mask, prep/clean, and spray this coating on as it will help in what you want to accomplish; Line-X, et al, dries too hard. The 3M product is flexible and will not fall off the inner wheel liner. You will be establishing a different layer to help dissipate/absorb the sound wave as it travels through both the rubberized coating and the wheel liner; plus this should actually adhere to the liner.

As what seems to be a universal law we often get what we pay for. Best of luck with the above spray on fix and please let us know what your impressions are. The above will more than likely address higher frequency related noise.

spiderman · 02-24-2009, 09:51 AM

Quote:

Originally Posted by SoCal 370Z

Here is what you are looking for: 3M™ Underseal™ Rubberized Undercoating, 08883

Take off your rear wheel, mask, prep/clean, and spray this coating on as it will help in what you want to accomplish; Line-X, et al, dries too hard. The 3M product is flexible and will not fall off the inner wheel liner. You will be establishing a different layer to help dissipate/absorb the sound wave as it travels through both the rubberized coating and the wheel liner; plus this should actually adhere to the liner.

Has anyone done this yet??? I hear the noise from the wheel wells is annoying and I'm almost definite I want to do this easy fix. I'd like some feedback on this please.

axio · 03-23-2009, 07:48 PM

Yeah, I'm also wondering if anyone has done this, and what the results are. Thanks!

Minicobra1 · 03-24-2009, 03:53 AM

Quote:

Originally Posted by axio

Yeah, I'm also wondering if anyone has done this, and what the results are. Thanks!

Yes, I have done it, but with a different rubber spray product, 3M probably similar. it doesn't make a huge difference, it does help a little though, but not completely. I think dynomatting the inside is going to help more, or a combo of the 2.

Here is the link to the thread I started a few weeks back.
Fender Coating to reduce noise

patburk · 05-20-2009, 02:52 PM

click on this link and watch the Jay Leno videos in the bottom right corner of the page.
The Official Dynamat Website
please post your results......thanks

caneman88 · 05-20-2009, 11:48 PM

dynamat noise is on the inside fix it from the inside. I did no more noise also going to put some polyfill on the left hand wheel well inside big empty cavity echoing the noise into the cabin

02-18-2009, 01:19 PM	#16 (permalink)
k.alexander Base Member Join Date: Feb 2009 Location: Philadelphia, PA Age: 46 Posts: 240 Drives: 09 Nissan 370Z PG M6 Rep Power: 715	Could someone who actually ends up doing this, PLEASE, post some results. Thanks. __________________ -Are you coming to bed? -I can't. This is important. -What? -Someone is WRONG on the internet.

05-20-2009, 02:52 PM	#22 (permalink)
patburk Base Member Join Date: May 2009 Location: san diego Posts: 3 Drives: Nissan 350Z CS M6 Rep Power: 17	this might work.... click on this link and watch the Jay Leno videos in the bottom right corner of the page. The Official Dynamat Website please post your results......thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: Stainless Steel Braided Clutch Line	George@GTM	Suspension/Brakes	3	02-17-2009 04:56 PM
Wheel Blowout!	BPAuto	Wheels & Tires	3	01-27-2009 02:14 PM
GT Motorsports: Turbo Oil and Coolant line kits, Perfect for HKS TT	George@GTM	Forced Induction	0	12-30-2008 04:41 PM
2009 Edmunds' Inside Line Editors' Most Wanted Awards	AK370Z	Other Vehicles	1	11-12-2008 11:25 AM

03-23-2009, 07:48 PM	#20 (permalink)
axio Enthusiast Member Join Date: Jan 2009 Location: SF Bay Area, CA Posts: 271 Drives: '09 370Z Rep Power: 17	Yeah, I'm also wondering if anyone has done this, and what the results are. Thanks!

05-20-2009, 11:48 PM	#23 (permalink)
caneman88 Base Member Join Date: Mar 2009 Location: San Antonio TX Posts: 225 Drives: PG 370Z,M-35,F150 Rep Power: 17	dynamat noise is on the inside fix it from the inside. I did no more noise also going to put some polyfill on the left hand wheel well inside big empty cavity echoing the noise into the cabin