Nissan 370Z Forum
Page 127 of 669 « First 2777117125126 127 128129137177227627 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   What did you do with your Z today (http://www.the370z.com/nissan-370z-general-discussions/19704-what-did-you-do-your-z-today.html)

onzedge 05-13-2011 05:39 PM
Quote:
Originally Posted by nynhex (Post 1109407)
Thanks, I had a B&M in my 350z and it never shifted properly. Real knotchy and didn't feel natural at all. Has the designed improved since 07? lol
It probably had more to do with the transmission than the shifter. Mine feels just fine and an improvement over stock.

UNKNOWN_370 05-13-2011 05:39 PM
I haven't done anything today but I'm going to. "Wildout" in it tonight. :driving:

nynhex 05-13-2011 05:41 PM
Quote:
Originally Posted by onzedge (Post 1109413)
It probably had more to do with the transmission than the shifter. Mine feels just fine and an improvement over stock.
Good point, the 350z transmission chattered and was pretty rough to shift. The 370z seems a bit smoother, apparently design improvements have been made.

MUST 05-13-2011 06:03 PM
today...

http://www.the370z.com/members/must-...33084-side.jpg

http://www.the370z.com/members/must-...2-20in-sp1.jpg

the fronts sit flush, the rears hella-flush to a bit poke..

20in SSR SP1: Flat Black, 9.5+10 MD *3.75in lip* & 11 -4 SL *5.5in lip* (15mm spacer, SSR mis-spec'd my setup by 12mm :( )

kenchan 05-13-2011 06:39 PM
Nice~! :yum:

kenchan 05-13-2011 06:40 PM
I failed my first attempt to remove stock knob...actually the strap wrench broke. :D hahahaha

Red__Zed 05-13-2011 06:41 PM
Switched to a less aggressive alignment. -3.1 rear camber handles great, but the tires don't like it.

kenchan 05-13-2011 06:45 PM
Wat are u running now, red_zed?

Drex 05-13-2011 06:58 PM
saw some kids playing ball around my z, then noticed one of them had put his jacket on the hatch. :facepalm:

thought about peeling out with the jacket still there, but just went out and asked them nicely who's it was and that i was going to hang it up on the railing 2 ft away. i dont want them to come back later and **** with the z.

Red__Zed 05-13-2011 07:06 PM
Quote:
Originally Posted by kenchan (Post 1109529)
Wat are u running now, red_zed?
Still perfecting. Went to zero toe up front, might go back to toe out. Thinking about going really aggressive for the dragon.

Now at 1.5 camber front, 2.6 rear. Need to pick up some front camber arms to get more adjustability up front.

11Thumper 05-13-2011 07:15 PM
Quote:
Originally Posted by Drex (Post 1109550)
saw some kids playing ball around my z, then noticed one of them had put his jacket on the hatch. :facepalm:

thought about peeling out with the jacket still there, but just went out and asked them nicely who's it was and that i was going to hang it up on the railing 2 ft away. i dont want them to come back later and **** with the z.
Dumb kids. Smart move on your part though... :tup:

onzedge 05-13-2011 07:22 PM
Quote:
Originally Posted by kenchan (Post 1109517)
I failed my first attempt to remove stock knob...actually the strap wrench broke. :D hahahaha
Dude, come on now. I got mine off by hand -- even though I had tools at the ready. Must be all of that right hand/knob grabbing practice I have had in my life. It finally paid off!!!! I knew it would.

chops 05-13-2011 07:26 PM
Quote:
Originally Posted by Red__Zed (Post 1109561)
Still perfecting. Went to zero toe up front, might go back to toe out. Thinking about going really aggressive for the dragon.

Now at 1.5 camber front, 2.6 rear. Need to pick up some front camber arms to get more adjustability up front.
thats my exact specs! heh..i pulled off the wheels the other day and after 500miles or so the camber wear is already starting to show


Quote:
Originally Posted by kenchan (Post 1109517)
I failed my first attempt to remove stock knob...actually the strap wrench broke. :D hahahaha
ouch. its ok...i completely wrecked my stock knob :| im going to have it re-wrapped in alcantara one of these days!

kenchan 05-13-2011 07:26 PM
Quote:
Originally Posted by Red__Zed (Post 1109561)
Still perfecting. Went to zero toe up front, might go back to toe out. Thinking about going really aggressive for the dragon.

Now at 1.5 camber front, 2.6 rear. Need to pick up some front camber arms to get more adjustability up front.
Sounds good. 1.7's pretty good. You want more neg camber up front?

Quote:
Originally Posted by onzedge (Post 1109584)
Dude, come on now. I got mine off by hand -- even though I had tools at the ready. Must be all of that right hand/knob grabbing practice I have had in my life. It finally paid off!!!! I knew it would.
Hahahaha, not sure how much loctite they used but the knob is seized. :D

http://www.the370z.com/members/kench...1311181458.jpg

kenchan 05-13-2011 07:27 PM
Drex- smart move! :tup:


All times are GMT -5. The time now is 02:45 AM.
Page 127 of 669 « First 2777117125126 127 128129137177227627 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2