hahaha, "real"

:wtf: This thread hasn't been closed yet?

i guess in reality, it doesn't matter if your badges are metal or plastic. i'm pretty sure if you could make the same badge design out of plastic and paint it the standard chrome, black pearl, or w/e else people would be down for it.

AgStackerisms:

Son, you can not afford.
Take a look at that guy who posted above you (KaienZ34), he has two Z's, with aftermarket wheels, he can afford.

If you haven't already spent some serious cash customizing your car, these badges are most likely not for you.

No need to get butt-hurt, just try to be less annoying if you're going to post in this thread.

I didn't say you were poor, obviously you are not if you're drive a 370. I just dont think you understand what I'm producing here.

I have not offered anything for sale, when and IF I do, I will most certainly become a vendor, I have already spoken to AK about this.
__________________________________________________ _______

Wonder why this thread didn't produce results.

Ztoon, quote that lol at first I thought you were saying that again! lol

You could Forge these, or High pressure cast them if you plan on making massive quantities, and bring the price down, well bellow $200.

:confused:

and I was laughing with you not at you

:bowrofl:

Someday they will be available. :excited:

Thats what happens when people call :bs: and the person can't handle it...

I doubt we'll see a mainstream vendor sold version of this, not too much to offer besides the ooh aah factor and to be a tool and say I have metal emblems... Ok bud, good for you lol :ugh2:

Same here! I was like :wtf: had to read it again then I was like ohhhhh! :p :tup:

:bs:

I wouldn't trust him Holliday... :icon08:

Sneaky Canadian! :bowrofl: :tup:

:stirthepot:

It's all good. :usa:

do these have to be lisenced in some way by nissan?

Yes.

I looked up the trademark on any "Z" by Nissan several pages back, and it looked like they only own rights to the "370Z" likeness. I seriously doubt anybody will get sued for using just the "Z" logo. I'm sure somebody else had produced a design that looks EXACTLY like that Z long before Nissan ever thought of the 370Z, so in reality it's Nissan who should get sued for it.

I can haz Emblemz now? :icon17:

Z28 comes to mind.

its not the letter Z that gets you in trouble, its the trademark on the Z logo... that specific Z, with the kinks at the end of the z, and the diagonal mid plane in the middle, etc.... that is what they control.

They don't though. No trademark on file. The only thing that protects it is copyright law, and since it can be shown in court that the Z itself probably drew elements from other previous copyrighted works, Nissan wouldn't have a chance in hell at winning.

Besides, the last thing Nissan wants to do is sue somebody for producing aftermarket parts for one of their cars. That's probably one of the worst things they could ever do for public image in the eyes of people like us.

yah, but the nissan executives driving arround ferrari's might not care. :D

Here's the thing. Nissan would only sue if they wanted to make and sell the part or if they feel they could lose controll for the trade mark. Why risk losing a costly court battle that would result in losing the Z tm if there is nothing to gain. Mostly likely Nissan would just keep send threat letters.

wow, what a crock of ****.

first he comes on here, wanting to just make a set of diy emblems for himself, and then when people want to buy them, he wants ~$500 a set? It doesn't cost much more to program the cnc machining to do 2 more runs.

People on diyaudio.com spend countless hours making electronic circuits and circuit board drawings and give out the files and schematics, FREE! to help the community. AG just comes off as being greedy.

I've worked with screw machine shops before. I work with a place in El Segundo, Ca.

You just bring them a cad file, or a drawing with dimensions and they will do the rest. $120 an hour to program the CNC machine, and material cost (aluminum). The larger quantity you make, the cheaper each part will be.

I had them make some custom aluminum fuel rails for carbs. I took them a piece of paper with a hand drawing and measurements, and they did they rest. It cost $1100 to do a run of 120 fuel rails. That's a cost of $9 EACH!!!!

if anyone has the file for the design here I could run it by some friends of mine. No promises or anything but wouldnt hurt?

Funny enough, no one has made any of these... :(

If somebody provides me with a set of OEM badges (or just one if the front and rear are identical), I could get the ball rolling on a hard prototype.

I suppose I can pick up some from the dealership, but I'm definitely not going to pull my stock ones off unless that's the only way.

I would like to see a footrest pedal made. About 4" tall and fit over the existing left footrest, mounted with either double sided tape or screws. You could machine it out of aluminum or even plastic and add a Z appropriate design to it. Anodize in the color of your choice if aluminum.

The footrest in the Z is too far away, it should be flush with the brake and/or clutch pedal imo. What do you think? Stupid idea?

i feel like people just want Z badges that fit, bottom line. IF the ones from the z store fit, we wouldn't have a problem.

Bump for progress????

I think this subject is DEAD. I wish a cheap alternative would come about soon. until then, burgers badges for me :(

I was talking to scruffydog awhile back, and he has the tech info for them. Great designs! I tried to hook him up with another forum member that had some machining capabilities, but nothing came of it. So you might want to pm him. Worth a shot.

Firstly, this isn't meant as a criticism of any individual.

Having read this entire thread from start to finish, it's indeed sad to see the best and worst emerging: -

The best: the initial rush of passion and enthusiasm and encouragement offered.

The worst: how misunderstandigs can escalate and become something that none of the parties ever intended.

Result: bitterness, disharmony and nothing accomplished.

Sad that it went this way - a real shame to see.

However, on a positive note, the cameraderie of this forum is something else and I am enjoying being a part of it.

Thanks. :tup:

I agree a 1000%! Any idea to eliminate the plastic emblems I'm for! Brushed or Polished Aluminum would be great in #1 or #2.

Don't bring this back up. This thread died when it was decided that the cost was too much to make these parts on this small scale.

And when I was told I couldn't afford it :roflpuke2:

I'm just posting this so I can be a part of this epic thread....thank you.