Nissan 370Z Forum - Where can I find Fairlady Z badges??

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)

- - Where can I find Fairlady Z badges?? (http://www.the370z.com/nissan-370z-general-discussions/1678-where-can-i-find-fairlady-z-badges.html)

nogoodname

02-03-2009 04:43 PM

^^ it will if you leave on for a long period of time, if used as directed, you will be waxing the car...... just dont take a long time......spray on...wipe off

scrap

05-19-2010 07:08 PM

You can find it on the Z store it is 26 bucks right now that is where ii go my "FairladyZ" Logo

370Z JT

05-21-2010 01:07 AM

I bought mine from ebay for $22 shipped.

Jose Aliling

03-25-2011 11:05 AM

I've ordered one!

Highway

03-25-2011 01:13 PM

I kind of want to do this and I don't know why.

USMCASA

03-25-2011 02:07 PM

you can find one on the back of my car

brucelidat

08-28-2011 03:00 AM

With the Bug and Tar method. If I don't have fishing line, Would I be able to just pull it off with my hands or is there some other household item that would be effective?

onzedge

08-28-2011 08:11 AM

Quote:

Originally Posted by nogoodname (Post 26490)

^^ not even, spray the "turtle wax bug remover" on the badges, let it soak a bit...then use a fishing line and slice the badges off and use the "turtle wax" spray some more to remove left over adhesive....and then buff it out with some wax

I did just that and i got a black G37.........the "goo-gone" that some ppl used was absolutely a waste of time........my method is like 20 mins max....goo--gone would have taken me all day to do...

:iagree:

onzedge

08-28-2011 08:11 AM

Quote:

Originally Posted by brucelidat (Post 1285212)

With the Bug and Tar method. If I don't have fishing line, Would I be able to just pull it off with my hands or is there some other household item that would be effective?

Dental floss works also.

C09	08-28-2011 10:35 AM

Anyone have the OEM part # for this...?

enkei2k

08-28-2011 10:55 AM

Quote:

Originally Posted by C09 (Post 1285357)

Anyone have the OEM part # for this...?

Part # is 84895-1EK0A I believe:

source: NissanParts.cc - Your #1 Source for OEM Parts and Accessories

Mecinoid

10-19-2011 05:49 PM

Quote:

Originally Posted by onzedge (Post 1285261)

Dental floss works also.

Waxed Dental Floss works better imo. Plus, some of the stiffer fishing line can cut the paint. Been there done that, Doh !!?!!!

Waxed Dental Floss adds some protection while cutting the adhesive.

In my case, the surface was damaged by etching of glue from the previous emblem. Therefore, I had to buff the surface out with plastic polish.... veeerrrry carefully and a bit at a time.

Then rubbing alcohol to prep surface for new emblem and then I waxed AFTER the installation of the new emblem. Waxing before doesn't give as good of a surface for new emblem to adhere to. :ugh2:

phelan

10-19-2011 05:51 PM

holy zombie thread revival, batman!

Jose Aliling

10-19-2011 08:18 PM

i got mine at the z store :tup:

All times are GMT -5. The time now is 10:55 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page