What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

BettyZ · 05-16-2019, 12:56 AM

Things I learned taking the Z out for a nighttime test drive:

1. New Craftsquare mirrors are awesome - until you notice that the passenger mirror is slightly off and there's no adjusting it while driving. Then they drive you insane. There's also a lovely whistling noise. Going to take the weather stripping from the stock mirrors and put them on the Craftsquares tomorrow.

3. Bugs are drawn to a freshly detailed car because **** you. #science

4. Tried to log WOT in 3rd/4th and the handbrake and traction indicators lit up. Thar be aiiiiiir in my ABS module.

5. Touchscreen stereos are short bus retarded. I'm getting one with a knob.

6. Hitting an oncoming car with 165 combined watts of 6000k HID Hella goodness will make them either a) turn off their goddamn brights or b) drive off the road in a blind panic (see what I did there?).

7. 34 row oil cooler is STUPID COLD. 70*F ambient at highway speed and couldn't break 174*F oil temp - that's with three Hella FF75s in the bumper mouth limiting airflow.

8. AIT is still at 7*F above ambient even with DEI gold wrap on the Z1 intakes. Maybe the gold will help combat heatsoak. If not, whatever, I still have $$$ golden intakes, b*itches $$$

Sent from my SM-G955U using Tapatalk

madwi · 05-16-2019, 01:13 AM

Quote:

Originally Posted by BettyZ

Things I learned taking the Z out for a nighttime test drive:

1. New Craftsquare mirrors are awesome - until you notice that the passenger mirror is slightly off and there's no adjusting it while driving. Then they drive you insane. There's also a lovely whistling noise. Going to take the weather stripping from the stock mirrors and put them on the Craftsquares tomorrow.

I really dont like the look of the locking CS mirrors but F me if that passenger side mirror gets knocked out of position. Ive never noticed any whistling from my mirrors. I got that going for me, which is nice.

mishuko · 05-16-2019, 07:02 AM

FI order confirmed. Now a 4-6 week + shipping + finding a day to get the shop to install.

Dear Fast Intentions. Please put maximum effort and resources to get this bad boy to me by yesterday.

Jk... quality is not rushed

Leingod · 05-16-2019, 08:03 AM

Quote:

Originally Posted by madwi

I really dont like the look of the locking CS mirrors but F me if that passenger side mirror gets knocked out of position. Ive never noticed any whistling from my mirrors. I got that going for me, which is nice.

Do both types of CS mirrors having locking hinges? Maybe that's why the knockoff Evo r ones are so crappy. They move at the slightest breeze from only locking the top part of the mirror itself and not the necks.

BettyZ · 05-16-2019, 08:32 AM

Quote:

Originally Posted by mishuko

FI order confirmed. Now a 4-6 week + shipping + finding a day to get the shop to install.

Dear Fast Intentions. Please put maximum effort and resources to get this bad boy to me by yesterday.

Jk... quality is not rushed

Consider yourself lucky. When I placed my order in late 2018 it took 3 months.

Sent from my SM-G955U using Tapatalk

BettyZ · 05-16-2019, 08:38 AM

Quote:

Originally Posted by Leingod

Do both types of CS mirrors having locking hinges? Maybe that's why the knockoff Evo r ones are so crappy. They move at the slightest breeze from only locking the top part of the mirror itself and not the necks.

By locking hinges do you mean a ball and socket joint?

Sent from my SM-G955U using Tapatalk

Leingod · 05-16-2019, 08:53 AM

Quote:

Originally Posted by BettyZ

By locking hinges do you mean a ball and socket joint?

Sent from my SM-G955U using Tapatalk

The goose necks themselves if that makes any sense.

BettyZ · 05-16-2019, 09:57 AM

Quote:

Originally Posted by Leingod

The goose necks themselves if that makes any sense.

You're talking ab how the ball joint on Evo-Rs screws into the goose neck?

Sent from my SM-G955U using Tapatalk

Leingod · 05-16-2019, 09:59 AM

Quote:

Originally Posted by BettyZ

You're talking ab how the ball joint on Evo-Rs screws into the goose neck?

Sent from my SM-G955U using Tapatalk

Yea. How specifically do the CS mirrors lock into place? The ball joint on mine is constantly loose and the top lock on the top of the mirror is tight, but the mirror still wobbles. Want to make sure whe I get the CS, I get the type that'll be secure and locked properly.

JARblue · 05-16-2019, 10:00 AM

The EVO-R mirrors are just a shitty design. You won't have any problems with the CS mirrors regardless of the neck type you get

abm89 · 05-16-2019, 10:08 AM

Quote:

Originally Posted by JARblue

The EVO-R mirrors are just a shitty design. You won't have any problems with the CS mirrors regardless of the neck type you get

lol mine work fine.

JARblue · 05-16-2019, 10:11 AM

Well, I've seen several sets that had the problem where they wouldn't stay in position. I sold Lein that set at a loss because of the quality. I guess some are ok and some aren't. Typical EVO-R...

abm89 · 05-16-2019, 10:14 AM

Quote:

Originally Posted by JARblue

Well, I've seen several sets that had the problem where they wouldn't stay in position. I sold Lein that set at a loss because of the quality. I guess some are ok and some aren't. Typical EVO-R...

Yeah I could see that. I think me and two other people from Houston got a decent batch. Other than the rattle (thanks solid motor mounts -_-) I prefer the viewing angle of those more than the OEM mirrors.

I do switch to the stock ones in the winter b/c i like putting my hand against the heated mirror. I may get some MCR glass to replace them so i can get the wide angle on both sides.

Their fog light, however, sucks. I am contemplating going back to the OEM fog light or going Top Secret.

BettyZ · 05-16-2019, 10:23 AM

Quote:

Originally Posted by Leingod

Yea. How specifically do the CS mirrors lock into place? The ball joint on mine is constantly loose and the top lock on the top of the mirror is tight, but the mirror still wobbles. Want to make sure whe I get the CS, I get the type that'll be secure and locked properly.

The ball/mirror body piece is one piece. You can see the protuberance on the part touching the mirror, it screws directly into what I believe is a fastening plate behind the CF.

Also the instructions are in Japanese. I had a friend translate some of them, will post up in a standalone thread

Sent from my SM-G955U using Tapatalk

Fuzzzy · 05-16-2019, 10:50 AM

Quote:

Originally Posted by A-A-ron

I put the "Sport" in Sport Utility Vehicle.

Hurts my back just looking at that. Love your tag!

05-16-2019, 12:56 AM	#3136 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: USA Age: 38 Posts: 5,260 Drives: A Garage Queen Rep Power: 2684372	Things I learned taking the Z out for a nighttime test drive: 1. New Craftsquare mirrors are awesome - until you notice that the passenger mirror is slightly off and there's no adjusting it while driving. Then they drive you insane. There's also a lovely whistling noise. Going to take the weather stripping from the stock mirrors and put them on the Craftsquares tomorrow. 3. Bugs are drawn to a freshly detailed car because **** you. #science 4. Tried to log WOT in 3rd/4th and the handbrake and traction indicators lit up. Thar be aiiiiiir in my ABS module. 5. Touchscreen stereos are short bus retarded. I'm getting one with a knob. 6. Hitting an oncoming car with 165 combined watts of 6000k HID Hella goodness will make them either a) turn off their goddamn brights or b) drive off the road in a blind panic (see what I did there?). 7. 34 row oil cooler is STUPID COLD. 70F ambient at highway speed and couldn't break 174F oil temp - that's with three Hella FF75s in the bumper mouth limiting airflow. 8. AIT is still at 7F above ambient even with DEI gold wrap on the Z1 intakes. Maybe the gold will help combat heatsoak. If not, whatever, I still have $$$ golden intakes, bitches $$$ Sent from my SM-G955U using Tapatalk JARblue, Jayhovah, Ghostvette and 4 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

05-16-2019, 07:02 AM	#3138 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9436	FI order confirmed. Now a 4-6 week + shipping + finding a day to get the shop to install. Dear Fast Intentions. Please put maximum effort and resources to get this bad boy to me by yesterday. Jk... quality is not rushed JARblue, Ghostvette, sx moneypit and 2 others like this.

05-16-2019, 10:00 AM	#3145 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	The EVO-R mirrors are just a shitty design. You won't have any problems with the CS mirrors regardless of the neck type you get Leingod likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

05-16-2019, 10:11 AM	#3147 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Well, I've seen several sets that had the problem where they wouldn't stay in position. I sold Lein that set at a loss because of the quality. I guess some are ok and some aren't. Typical EVO-R... __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM