Nissan 370Z Forum
Page 184 of 435 « First 84134174182183 184 185186194234284 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   What did you do with your Z today V (ON TOPIC DISCUSSION ONLY) (http://www.the370z.com/nissan-370z-general-discussions/122002-what-did-you-do-your-z-today-v-topic-discussion-only.html)

Leingod 03-13-2019 03:09 PM
Quote:
Originally Posted by Wheels3309 (Post 3833709)
Doing the same.... I’m overly optimistic that I’ll be driving within the next couple weeks. I’m over this snow bs


Sent from my iPhone using Tapatalk
I'm waiting until end of April at this rate. Rome still has 3 feet on the ground and mounds of salt everywhere. We need a few good rainstorms to wash all the crap away.

On a side note. Get ahold of me this summer so we can go for another cruise. I've had a lot of work done since our last install day.

mishuko 03-15-2019 06:09 PM
Quote:
Originally Posted by Leingod (Post 3833728)
I'm waiting until end of April at this rate. Rome still has 3 feet on the ground and mounds of salt everywhere. We need a few good rainstorms to wash all the crap away.

On a side note. Get ahold of me this summer so we can go for another cruise. I've had a lot of work done since our last install day.
Lots of rain this week....

Tomorrow (will be near freezing but....) gonna do the first start of year, get tires inflated and gonna gently send it.

Yes there is still some snow mounds. No. I will not be patient!!

mishuko 03-15-2019 07:00 PM
I lied did it now lol. Fml rain tho

JARblue 03-15-2019 07:53 PM
PITA to install Whiteline poly differential bushings a few years ago. Found a set of SPL solid bushings in Houston that I will be purchasing :rock:

Rusty 03-15-2019 08:16 PM
Quote:
Originally Posted by JARblue (Post 3834506)
PITA to install Whiteline poly differential bushings a few years ago. Found a set of SPL solid bushings in Houston that I will be purchasing :rock:
So you going to swap out the Whiteline diff bushing for the SPL diff bushing?

JARblue 03-15-2019 09:51 PM
Yup :eekdance:

I will wait to do them at the same time as the SPL subframe bushings.

OTW Z-Boy 03-17-2019 11:11 AM
When to grab something out of the Z.
Closed the door, and the window motor starts to make a clicking noise (both sides).
Grab keys, go to start the Z.
Doesn’t start, battery dead.
Grab jumper cables, start the Q.
Hooked up the Z, it started.
Let it run for a couple minutes.
Decided hey let’s drive it.
Went to the donut shop, left it locked and running.
Some guy says is that you car?
Reply Yes.
Do you wanna sell it?
*


Sent from my iPhone using Tapatalk

BoneZ 03-17-2019 12:41 PM
Ops...

madwi 03-17-2019 12:55 PM
Quote:
Originally Posted by OTW Z-Boy (Post 3834818)
When to grab something out of the Z.
Closed the door, and the window motor starts to make a clicking noise (both sides).
Grab keys, go to start the Z.
Doesn’t start, battery dead.
Grab jumper cables, start the Q.
Hooked up the Z, it started.
Let it run for a couple minutes.
Decided hey let’s drive it.
Went to the donut shop, left it locked and running.
Some guy says is that you car?
Reply Yes.
Do you wanna sell it?
*


Sent from my iPhone using Tapatalk
What timing! I shut my door last night and the clicking happened to me! Thought I busted some sensors or something!

OTW Z-Boy 03-17-2019 01:04 PM
Quote:
Originally Posted by madwi (Post 3834830)
What timing! I shut my door last night and the clicking happened to me! Thought I busted some sensors or something!


Yeah it doesn’t get driven a whole lot so I’ve had to jump it before. But never heard that noise before.


Sent from my iPhone using Tapatalk

madwi 03-17-2019 01:06 PM
Quote:
Originally Posted by OTW Z-Boy (Post 3834833)
Yeah it doesn’t get driven a whole lot so I’ve had to jump it before. But never heard that noise before.


Sent from my iPhone using Tapatalk
Me either. When I shut the door I was like wtf! tried to disconnect the battery as fast as possible. :icon17:
JChammond told it to check the battery too so I tossed it on the charger and I was going to check on it in a few hours.

OTW Z-Boy 03-17-2019 01:18 PM
Quote:
Originally Posted by madwi (Post 3834834)
Me either. When I shut the door I was like wtf! tried to disconnect the battery as fast as possible. :icon17:

JChammond told it to check the battery too so I tossed it on the charger and I was going to check on it in a few hours.


Yeah seems to have corrected it self, probably the low volts just could not get the window to seal up when door open close. Then it just keeps trying till it does. In this case it wasn’t going to. Probably has been sitting 2/3 months. But after it did start felt good on drive.

Damn thing feels slow compared to the Q but way more nimble that’s for sure.
https://uploads.tapatalk-cdn.com/201...22dae7597d.jpg


Sent from my iPhone using Tapatalk

madwi 03-17-2019 01:22 PM
Quote:
Originally Posted by OTW Z-Boy (Post 3834836)
Yeah seems to have corrected it self, probably the low volts just could not get the window to seal up when door open close. Then it just keeps trying till it does. In this case it wasn’t going to. Probably has been sitting 2/3 months. But after it did start felt good on drive.

Damn thing feels slow compared to the Q but way more nimble that’s for sure.
( Click to show/hide )



Sent from my iPhone using Tapatalk
The Q is so nice. I love em. :driving:

OTW Z-Boy 03-17-2019 03:07 PM
Quote:
Originally Posted by madwi (Post 3834837)
The Q is so nice. I love em. :driving:


Yep good buddies
https://uploads.tapatalk-cdn.com/201...806fb2b59a.jpg


Sent from my iPhone using Tapatalk

markesc 03-17-2019 03:20 PM
Quote:
Originally Posted by OTW Z-Boy (Post 3834854)
Yep good buddies
https://uploads.tapatalk-cdn.com/201...806fb2b59a.jpg


Sent from my iPhone using Tapatalk
Looks good! About the perfect stance that appears to be functional!


All times are GMT -5. The time now is 03:20 AM.
Page 184 of 435 « First 84134174182183 184 185186194234284 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2