Removing stillen G3 and installing oem

abdulisraddd · 02-29-2016, 07:13 PM

So tomorrow I'm picking up stillen G3 from a buddy but he said I have to take it off his car and install his oem box. Will this be easy ? Also anyone have any tips to make this go by faster? Thanks boys

Sent from my iPhone using Tapatalk

Nixin · 02-29-2016, 08:56 PM

Do a search on this forum. It has been covered here and on youtube as well. I think the biggest pain in the a$$ is the removal of the actual entire front bumper.

cooltoy · 02-29-2016, 08:57 PM

We have this crazy DIY section. Not sure what it's for.

DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)

abdulisraddd · 02-29-2016, 09:21 PM

Quote:

Originally Posted by cooltoy

We have this crazy DIY section. Not sure what it's for.

DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)

Im on this forum almost my whole 10 hour work shift and I actually have this DIY printed out lol

I was asking for removal of g3 and installation of oem set up

cooltoy · 02-29-2016, 10:45 PM

Reverse the steps maybe?

boosted3z · 03-01-2016, 04:11 AM

Quote:

Originally Posted by cooltoy

Reverse the steps maybe?

LA370z · 03-01-2016, 06:53 AM

I've seen the procedure to do this task. It's well worth every penny spent having someone do it for you but then again I'm lazy.

Chuck33079 · 03-01-2016, 07:04 AM

Quote:

Originally Posted by LA370z

I've seen the procedure to do this task. It's well worth every penny spent having someone do it for you but then again I'm lazy.

Installing a G3? It's an hour of work, taking your time. Farming this one out is not necessary. The hard part is taking the bumper off, and that takes ten minutes.

Leingod · 03-01-2016, 07:54 AM

Quote:

Originally Posted by cooltoy

Reverse the steps maybe?

No no no!! Just flip the steps! Reversing is like holding them upside down!

mishuko · 03-01-2016, 11:57 AM

Quote:

Originally Posted by Chuck33079

Installing a G3? It's an hour of work, taking your time. Farming this one out is not necessary. The hard part is taking the bumper off, and that takes ten minutes.

as someone who hasn't worked on a car/done any mechanical work on cars my entire life it took about 2.5 hours in total to install. maybe less actually.

and I agree... the bumper is the hardest part... where I found the bolts under the wheel well shroud specifically being the hardest part for me.

abdulisraddd · 03-01-2016, 10:20 PM

This was my first time ever installing a car mod and it took me 3 hours total to take my oem intakes off , taking the stillen G3 off my buddy's car , installing my oem on his car and installing the G3 on my car

Sent from my iPhone using Tapatalk

abdulisraddd · 03-01-2016, 10:20 PM

Love the intake lol

Sent from my iPhone using Tapatalk

02-29-2016, 07:13 PM	#1 (permalink)
abdulisraddd Base Member Join Date: Oct 2015 Location: Northridge Age: 33 Posts: 154 Drives: 14 370z SP 7AT Rep Power: 11	Removing stillen G3 and installing oem So tomorrow I'm picking up stillen G3 from a buddy but he said I have to take it off his car and install his oem box. Will this be easy ? Also anyone have any tips to make this go by faster? Thanks boys Sent from my iPhone using Tapatalk __________________ BERK RTP//TOPSPEED DUAL CBE// STILLEN G3// 323HP

02-29-2016, 08:57 PM	#3 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 14,009 Drives: 14 PW 370Z S/T MT Rep Power: 243724	We have this crazy DIY section. Not sure what it's for. DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z) Trips, 90 ST, JARblue and 2 others like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

02-29-2016, 10:45 PM	#5 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 14,009 Drives: 14 PW 370Z S/T MT Rep Power: 243724	Reverse the steps maybe? Dirk McGurck, Zthirty4NISMO, Nixin and 1 others like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

03-01-2016, 10:20 PM	#11 (permalink)
abdulisraddd Base Member Join Date: Oct 2015 Location: Northridge Age: 33 Posts: 154 Drives: 14 370z SP 7AT Rep Power: 11	This was my first time ever installing a car mod and it took me 3 hours total to take my oem intakes off , taking the stillen G3 off my buddy's car , installing my oem on his car and installing the G3 on my car Sent from my iPhone using Tapatalk Silly Rabbit likes this. __________________ BERK RTP//TOPSPEED DUAL CBE// STILLEN G3// 323HP

03-01-2016, 10:20 PM	#12 (permalink)
abdulisraddd Base Member Join Date: Oct 2015 Location: Northridge Age: 33 Posts: 154 Drives: 14 370z SP 7AT Rep Power: 11	Love the intake lol Sent from my iPhone using Tapatalk __________________ BERK RTP//TOPSPEED DUAL CBE// STILLEN G3// 323HP

02-29-2016, 08:56 PM	#2 (permalink)
Nixin A True Z Fanatic Join Date: Sep 2015 Location: GWN Posts: 3,488 Drives: Goodbye Z! Rep Power: 19834	Do a search on this forum. It has been covered here and on youtube as well. I think the biggest pain in the a$$ is the removal of the actual entire front bumper.

03-01-2016, 06:53 AM	#7 (permalink)
LA370z Base Member Join Date: Sep 2015 Location: Louisiana Posts: 192 Drives: 2014 Nissan 370Z Rep Power: 11	I've seen the procedure to do this task. It's well worth every penny spent having someone do it for you but then again I'm lazy.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installing FI RTP's (Stillen CBE and G3 setup)	killacam370	Nissan 370Z General Discussions	2	06-10-2015 08:41 PM
Any benefit to installing meth injection on Stillen SC?	Neo187H	Forced Induction	5	04-16-2012 03:28 PM
NISMO owners installing Stillen Exhaust please read	mjohn617	Intake/Exhaust	8	02-10-2011 05:46 PM
Problems installing Stillen CBE	Luna	Intake/Exhaust	14	12-19-2010 12:02 PM
Removing/Installing rear hatch	kielbasa16	Exterior & Interior	3	11-10-2010 12:44 PM