370Z General Torque Specs

husam2012 · 10-28-2021, 10:06 PM

Good evening,

I was looking for a similar post with accurate torque specs and didn't find anything on the forum so here's what I made for my shop to save time and trouble.

TORQUE SPECS FOR 370Z - G37 - Q50 3.7 PLATFORM

Lug Nuts - 80-90 ft-lbs

Differential/Trans
Trans/Diff Fill Plugs - 26 ft-lbs
Rear Diff Axles/Shafts - 59 ft-lbs w/loctite
Driveshaft - 55 ft-lbs w/loctite
Diff Front Mount Bolts - 74 ft-lbs
Diff Rear Cover Nut - 81 ft-lbs
Flywheel Bolts - 75 ft-lbs w/loctite in a x pattern
Pressure Plate - 12 then 32 ft-lbs w/loctite in a x pattern
-------------------------------------------------------------------------
Suspension
Upper Control Arm - 41 ft-lbs at all 3 locations
Strut Tower Bar - 38 ft-lbs
Sway Bar Ends - 62 ft-lbs
Sway Bar Brackets - 38 ft-lbs
Shock Top 3 Nuts - 22 ft-lbs
Shock Lower Bolt w/sway bar link - 120 ft-lbs
Subframe Nuts/Bolts - 89 ft-lbs
-------------------------------------------------------------------------
Engine
Crank pulley - 33 ft-lbs + 90°
Motor Mounts - upper nut 38ft-lbs lower nut 70 ft-lbs
Headers - 11 ft-lbs for studs, 22 ft-lbs for nuts

git@no · 10-28-2021, 10:11 PM

what about spacers lug nuts ?

Sent from my SM-G998U using Tapatalk

10-28-2021, 10:06 PM	#1 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 543 Drives: 370Z Nismo Rep Power: 9469	370Z General Torque Specs Good evening, I was looking for a similar post with accurate torque specs and didn't find anything on the forum so here's what I made for my shop to save time and trouble. TORQUE SPECS FOR 370Z - G37 - Q50 3.7 PLATFORM Lug Nuts - 80-90 ft-lbs Differential/Trans Trans/Diff Fill Plugs - 26 ft-lbs Rear Diff Axles/Shafts - 59 ft-lbs w/loctite Driveshaft - 55 ft-lbs w/loctite Diff Front Mount Bolts - 74 ft-lbs Diff Rear Cover Nut - 81 ft-lbs Flywheel Bolts - 75 ft-lbs w/loctite in a x pattern Pressure Plate - 12 then 32 ft-lbs w/loctite in a x pattern ------------------------------------------------------------------------- Suspension Upper Control Arm - 41 ft-lbs at all 3 locations Strut Tower Bar - 38 ft-lbs Sway Bar Ends - 62 ft-lbs Sway Bar Brackets - 38 ft-lbs Shock Top 3 Nuts - 22 ft-lbs Shock Lower Bolt w/sway bar link - 120 ft-lbs Subframe Nuts/Bolts - 89 ft-lbs ------------------------------------------------------------------------- Engine Crank pulley - 33 ft-lbs + 90° Motor Mounts - upper nut 38ft-lbs lower nut 70 ft-lbs Headers - 11 ft-lbs for studs, 22 ft-lbs for nuts JARblue, jchammond, Red Voodoo and 1 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z hardware Torque Specs	osbornsm	Nissan 370Z General Discussions	45	08-14-2023 11:02 AM
Torque Specs	zero610	Nissan 370Z General Discussions	30	07-09-2016 02:54 PM
torque specs	angelmanuel	Brakes & Suspension	4	12-08-2014 10:08 PM
Oil pan torque specs	NORAIN	Engine & Drivetrain	6	12-01-2014 06:19 PM
Torque Specs	scionide	Brakes & Suspension	1	01-24-2012 12:54 PM

10-28-2021, 10:11 PM	#2 (permalink)
git@no Track Member Join Date: May 2014 Location: garden grove ca. Posts: 506 Drives: 2014 370z base model Rep Power: 11	what about spacers lug nuts ? Sent from my SM-G998U using Tapatalk