Nissan 370Z Forum - Missing under piece to bumper/front lip?

Nissan 370Z Forum (http://www.the370z.com/)

- Nismo 370Z (http://www.the370z.com/nismo-370z/)

- - Missing under piece to bumper/front lip? (http://www.the370z.com/nismo-370z/48233-missing-under-piece-bumper-front-lip.html)

Production pieces are in process of being made for the Nismo as of today !

The regular 370Z V2 and G37 V2 are in process also, Deeper, fits with Hotchkis sways and oil pan spacers.

Quote:

Originally Posted by fuct (Post 1617040)

how do they look?

see post #24

Quote:

Originally Posted by tjlazer (Post 1617079)

see post #24

the final version.... dur

Quote:

Originally Posted by fuct (Post 1618072)

the final version.... dur

looks like you are fuct until someone posts a picture of the final version ...

Here are a few pictures of the final version of the 2009-2012 Nismo 370Z under pan, There will be one change on the back side bottom which will increase the rigidity and also allow the use of oil pan spacers and deeper oil pans.

The outside fender pieces are mounted on the wrong side of the middle part in these pictures but will give you a good idea what they will look like.

I will get some pics of production pieces in the next few days and also get them on the website with pricing which is going to be in the $400 range.

We are also working on integrated brake ducting which is in the works right now.

Should have final pieces ready to ship in the next 3-4 days if all goes well.

http://photos.zspeedperformance.com/...dsize=1200x600

Picture below shows air duct to bring in cool air which will flow air across the oil pan and suction hot air out of the engine compartment and out the back of the shield for cooler under hood temps.

http://photos.zspeedperformance.com/...dsize=1200x481

http://photos.zspeedperformance.com/...dsize=1200x570

Outside fender liner pieces get mounted on top of the center section instead of below as pictured here.
http://photos.zspeedperformance.com/...dsize=1200x900

http://photos.zspeedperformance.com/...dsize=1200x564

Nice. I'm interested in one with the brake ducts. Also, I have the AAM oil pan spacer. When I installed that. I had to cut off the one mounting boss on the frame for clearance. How you going about that issue?

Quote:

Originally Posted by Rusty (Post 1619374)

I have never cut one off, I always just bend them out of the way then back after the spacer is installed.

I guess you could have a mount tacked back on so you can use all the mounting points.

Quote:

Originally Posted by Joe@ZSpeed (Post 1618993)

Here are a few pictures of the final version of the 2009-2012 Nismo 370Z under pan, There will be one change on the back side bottom which will increase the rigidity and also allow the use of oil pan spacers and deeper oil pans.

The outside fender pieces are mounted on the wrong side of the middle part in these pictures but will give you a good idea what they will look like.

I will get some pics of production pieces in the next few days and also get them on the website with pricing which is going to be in the $400 range.

We are also working on integrated brake ducting which is in the works right now.

Should have final pieces ready to ship in the next 3-4 days if all goes well.

Picture below shows air duct to bring in cool air which will flow air across the oil pan and suction hot air out of the engine compartment and out the back of the shield for cooler under hood temps.

Look's awesome ! Thanks for sharing the recent pics. I am curious to see how the brake ducting is integrated. :tiphat:

Quote:

Originally Posted by sixpax (Post 1619419)

Look's awesome ! Thanks for sharing the recent pics. I am curious to see how the brake ducting is integrated. :tiphat:

I should add that the brake ducts will be an add-on for the shield, Not sure how long it will be before we do them.

I had a problem with that part this weekend after I took the Z in for an Oil Change. The next day I was driving home from the store and heard this noise from under the car. I got out and it was hanging loose and hitting the ground. I got under the car and took it off before it came off on its own. Don't know if its worth putting back on or not? LOL

Quote:

Originally Posted by Rooskey (Post 1498128)

According to the diagram has anyone lost part 75895 while driving at high speeds? Mine flew off and took out one of my 02 sensors a few months back. I was running about 140mph when I heard a loud noise from underneath. I never heard of this before on the forums so im hoping this was a rare occasion.

Quote:

Originally Posted by Joe@ZSpeed (Post 1619452)

I should add that the brake ducts will be an add-on for the shield and it will be some time before these kits would be ready.

...I figured as much. :tup: