Quote:
Here's a link to another store Courtesy Nissan, but if you can find left hand drive version, I would go with that. Nissan JDM Rear Fog Lamp Kit - 2009 370Z :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com |
Quote:
Make sure you are getting either of the following for the JDM Reverse Fog: 25560-1EP0B 25560-1EP0C I can get them if you like, PM me for pricing and availability. I am looking into the Canadian-spec options now. |
The car is prewired, but the relay, fog light stalk is not on there. Most people will add a switch/relay to turn it on and off or wire it up to brake light etc.
|
Quote:
Doug |
Quote:
Doug |
Installing fog light (My way)
Hi,
I brought the fog light and installed it connecting to my license plate light. Use the red wire in the trunk wire harness near the license plate. Light stay on with the parking lights. Lou |
I bought the EVO-R rear fog light and spliced it into my taillight harness so that the light is on with my parking lights and flashes when my brake lights illuminate.
http://www.the370z.com/attachment.ph...1&d=1327246755 Parking lights on |
Quote:
|
:tup:The brilliant silver is a very nice color. Even the Frontier looks sporty with it.
|
Nissan Auto Parts in Toronto | Avenue Nissan Car Parts and Accessories
I emailed to Canada Nissan dealership about the Canadian stalk switch for cost and if able to have it ship out as stalk alone. :stirthepot: *cross finger* |
Great, let us know!
|
Quote:
I am going to order those foglamp switch with harness. The Z Store! Nissan-Datsun 240Z-260Z-280Z-280ZX-300ZX(Z31/Z32)-350Z-370Z Parts: Rear Fog Light Harness & Illuminated Switch, 09-12 370Z Expensive as it seem but it worth it for cleaner look for interior. |
You can buy a heated switch if not and rewire that to work with the fog light. Keeping the stock look. I think that harness is too much $$.
I think the stalk would still work, car is all prewired anyways. |
Part numbers for switch assy - combination (stalk)
"So far, I found out that the Canadian part manager said the stalk will not work on our Z because the their stalk only work for Canadian BCM module."
That is an incorrect dealer statement (not surprising). The BCMs, left body wiring harness and main wiring harness change almost every year, but the control stalk remains the same part number. In 2010, the USDM and MEXDM BCM part numbers matched. Basically, if you have the rear fog light wiring in your left body wiring harness, it should work. 2011 USDM (base) wire harness, main: 24010-1TH0A wire harness, left body: 24014-1TG0A controller assy-BCM: 284B1-1ET6C switch assy-combo (stalk): 25560-9N00B (this is the same stalk that CADM NISMO receive) 2011 CADM (base) wire harness, main: 24010-1TH0A wire harness, left body: 24014-1TG0A controller assy-BCM: 284B1-1EJ5D switch assy-combo (stalk): 25560-1EA0C 2011 MEXDM (touring, no base avail) wire harness, main: 24010-1EZ0A wire harness, left body: 24014-1EH0B controller assy-BCM: 284B1-1EA5D switch assy-combo (stalk): 25560-1EA0C --------------------------------------------------------------- US stalk: 25560-9N00B (lame USDM) $170 :thumbsdown: Canada/Mexico stalk: 25560-1EA0C (no rear wiper) :tup: Arabian/Argentinian/Brazilian stalk: 25560-1EL0B (with rear wiper) Euro stalk: 25560-1EL5A (daytime running lights; no rear wiper) Euro stalk: 25560-1HA7A (daytime running lights; with rear wiper) Japan stalk: 25560-1EP0B (RHD yo!) :ugh2: |
Quote:
|
All times are GMT -5. The time now is 12:32 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2