Nissan 370Z Forum
Page 9 of 19 « First 78 9 1011 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Mid Western Region (http://www.the370z.com/mid-western-region/)
-   -   Midwest Chat Thread everyone is welcome! (http://www.the370z.com/mid-western-region/51154-midwest-chat-thread-everyone-welcome.html)

ZMan8 04-16-2012 12:11 PM
Quote:
Originally Posted by erkthejerk73 (Post 1666574)
Meh FI exhaust does not really have the exotic sound like i was looking for. Really reminds me of the HKS setup on a 300zx!
That may be because of the pipes you have

ZMan8 04-16-2012 12:11 PM
Quote:
Originally Posted by osbornsm (Post 1666562)
On a side note...

I installed my Fast Intentions Non-Resonated this weekend with stock cats and it sound EVERYthing I wanted it to be. In fact, i'd go so far as to say there's a little drone on the highway that i'm looking to eliminate with some Dynamat in the trunk area.

If you have a Z you MUST buy fast intentions. :driving:
:tup: :iagree: I will be interested to hear the difference between Non-Res and my 18" res.

erkthejerk73 04-16-2012 12:12 PM
Quote:
Originally Posted by ZMan8 (Post 1666597)
That may be because of the pipes you have
maybe, but those will soon be sold for some other pipes that will take about 8-9 psi ;)

erkthejerk73 04-16-2012 12:14 PM
Quote:
Originally Posted by ZMan8 (Post 1666603)
:tup: :iagree: I will be interested to hear the difference between Non-Res and my 18" res.
i will take a few more videos when i can, currently busy till 2 weekends from now, vegas next week bros VEGAS!

ZMan8 04-16-2012 12:14 PM
Quote:
Originally Posted by erkthejerk73 (Post 1666608)
maybe, but those will soon be sold for some other pipes that will take about 8-9 psi ;)
:tup: :eek:

what kit are you going with?

erkthejerk73 04-16-2012 12:16 PM
Quote:
Originally Posted by ZMan8 (Post 1666618)
:tup: :eek:

what kit are you going with?
boosted performance's mid-mount!

ZMan8 04-16-2012 12:20 PM
Quote:
Originally Posted by erkthejerk73 (Post 1666627)
boosted performance's mid-mount!
nice, I haven't seen/read about it yet

erkthejerk73 04-16-2012 12:23 PM
Quote:
Originally Posted by ZMan8 (Post 1666635)
nice, I haven't seen/read about it yet
yeah he isnt a rookie when i comes to making kits, he supports the customer way better than a large company and his kits produce what he says they do!

ZMan8 04-16-2012 12:34 PM
Quote:
Originally Posted by erkthejerk73 (Post 1666639)
yeah he isnt a rookie when i comes to making kits, he supports the customer way better than a large company and his kits produce what he says they do!
always good to hear :tup:

erkthejerk73 04-16-2012 12:39 PM
yeah i need to find a clutch/fly now to prep!

Ni55anPat 04-16-2012 01:01 PM
I need to hear the F.I again

I'm happy with my topspeed and ypipe.

ZMan8 04-16-2012 01:03 PM
Quote:
Originally Posted by erkthejerk73 (Post 1666677)
yeah i need to find a clutch/fly now to prep!
careful not to get to light of a flywheel, it will get louder.

ZMan8 04-16-2012 01:05 PM
Quote:
Originally Posted by Ni55anPat (Post 1666736)
I need to hear the F.I again

I'm happy with my topspeed and ypipe.
You will hear plent trust me. At chicago Cars&Coffee most of us run one of the FI exhausts. From what I know its
Non res +LTH
Non Res
3 18" res
1 12" res + RTP
1 12" res + HFC

and I'm probably missing a few.

Ni55anPat 04-16-2012 01:22 PM
i'll have to hear em, idk if i'll enjoy anything more then my topspeed though!

ZMan8 04-16-2012 01:43 PM
Quote:
Originally Posted by Ni55anPat (Post 1666778)
i'll have to hear em, idk if i'll enjoy anything more then my topspeed though!
:tup: if we all ran the same exhaust it wouldn't be as interesting. I'm interested in hearing yours too. So far in real life I have hear the Stillen and Fast Intentions.

erkthejerk73 04-17-2012 08:48 AM
company i have been interviewing with has giving me a lower than expected offer... really want to work with them, but cant take a 30% pay cut!

Rooster89 04-17-2012 08:49 AM
Quote:
Originally Posted by erkthejerk73 (Post 1668612)
company i have been interviewing with has giving me a lower than expected offer... really want to work with them, but cant take a 30% pay cut!
stock options at least? do you think they are open to negotiation?

erkthejerk73 04-17-2012 09:08 AM
Quote:
Originally Posted by Rooster89 (Post 1668617)
stock options at least? do you think they are open to negotiation?
no stock, small independent company, i think it is negotiable a bit but not much.


Edit: just did some research and they offered me their bottom $ on their salary range, i found another listing where they listed the pay they are willing to shell out!

Rooster89 04-17-2012 09:20 AM
Quote:
Originally Posted by erkthejerk73 (Post 1668651)
no stock, small independent company, i think it is negotiable a bit but not much.


Edit: just did some research and they offered me their bottom $ on their salary range, i found another listing where they listed the pay they are willing to shell out!
:eek2: whatre ya gonna do? negotiate them high or just walk away?

erkthejerk73 04-17-2012 09:37 AM
Quote:
Originally Posted by Rooster89 (Post 1668668)
:eek2: whatre ya gonna do? negotiate them high or just walk away?
i will work with them, maybe throw in a sign in bonus. I really want to work for this company, they were ranked the #1 company to work for in the US in 2010 or 2008 i cant remember by INC magazine

erkthejerk73 04-17-2012 09:40 AM
taking a pay cut for this comapny should be worth it, i can always go independent after this company b/c by then i will have enough exp!

Rooster89 04-17-2012 09:43 AM
its really hard to drink tea and type at the same time. What about advancement oppurtunities? If you take a pay cut for say two years and advance quickly will it make up for it in say 7 years?

erkthejerk73 04-17-2012 09:49 AM
Quote:
Originally Posted by Rooster89 (Post 1668724)
its really hard to drink tea and type at the same time. What about advancement oppurtunities? If you take a pay cut for say two years and advance quickly will it make up for it in say 7 years?
advancement oppurtunities are there, they are just starting this division of the company so there will be growth. I highly doubt i'd be with the company i am with currently in 1 year from now, but i know another job that would actually give me a huge raise but the company might be a little shady... so im 100% not sure what to do!

ZMan8 04-17-2012 09:50 AM
sounds to me like you know what your options are. Do what feels right and don't look back :tup:

Rooster89 04-17-2012 09:54 AM
Quote:
Originally Posted by ZMan8 (Post 1668730)
sounds to me like you know what your options are. Do what feels right and don't look back :tup:
Truth has been spoken. I tried to rep but it said i need to spread it around more.

erkthejerk73 04-17-2012 10:06 AM
Got a meeting set up with their CEO/Presidents/Sales people out in vegas next week! come on lucky number 7!

ZMan8 04-17-2012 01:26 PM
Quote:
Originally Posted by erkthejerk73 (Post 1666627)
boosted performance's mid-mount!
I just read their thread...looks very well built and promising gains! :driving: :tup:

erkthejerk73 04-17-2012 01:50 PM
Quote:
Originally Posted by ZMan8 (Post 1669227)
I just read their thread...looks very well built and promising gains! :driving: :tup:
:driving: :happydance: :yum:

erkthejerk73 04-17-2012 02:49 PM
slow day at the office here!

erkthejerk73 04-18-2012 12:55 PM
really slow here again!

ZMan8 04-18-2012 03:47 PM
Quote:
Originally Posted by erkthejerk73 (Post 1671340)
really slow here again!
1/2 day at the office here :happydance:

Rooster89 04-18-2012 04:42 PM
I'm gonna miss the midwest when I move to texas. you guys rock.

ZMan8 04-18-2012 09:28 PM
Quote:
Originally Posted by Rooster89 (Post 1671872)
I'm gonna miss the midwest when I move to texas. you guys rock.
when is the big move?

Rooster89 04-18-2012 10:31 PM
Quote:
Originally Posted by ZMan8 (Post 1672441)
when is the big move?
2017 lol

ZMan8 04-18-2012 10:41 PM
Quote:
Originally Posted by Rooster89 (Post 1672580)
2017 lol
:bowrofl:

erkthejerk73 04-19-2012 08:17 AM
Quote:
Originally Posted by Rooster89 (Post 1671872)
I'm gonna miss the midwest when I move to texas. you guys rock.
Quote:
Originally Posted by ZMan8 (Post 1672441)
when is the big move?
Quote:
Originally Posted by Rooster89 (Post 1672580)
2017 lol
:bowrofl: :roflpuke2: :happydance:

osbornsm 04-19-2012 01:04 PM
What is this madness... nobody has posted in the MW thread today? !!

:shakes head::shakes head::shakes head:

Shameful !

<-- Getting wired up for a sub this Saturday @ Marksound Audio
Great prices and amazing work a definite two :tup::tup:

erkthejerk73 04-19-2012 01:08 PM
Quote:
Originally Posted by osbornsm (Post 1673675)
What is this madness... nobody has posted in the MW thread today? !!
:shakes head::shakes head::shakes head:

Shameful !

<-- Getting wired up for a sub this Saturday @ Marksound Audio
Great prices and amazing work a definite two :tup::tup:
i guess my post above yours means im a no one....

osbornsm 04-19-2012 01:08 PM
Quote:
Originally Posted by ZMan8 (Post 1666747)
You will hear plenty trust me. From what I know its:
- Non res +LTH
- Non Res
- 3 18" res
- 1 12" res + RTP
- 1 12" res + HFC
and I'm probably missing a few.
<-- Stock Cats Non-Res :tup:

osbornsm 04-19-2012 01:08 PM
Quote:
Originally Posted by erkthejerk73 (Post 1673684)
i guess my post above yours means im a no one....
Damn... mis read the time stamp... i sit corrected. :hello:


All times are GMT -5. The time now is 08:49 AM.
Page 9 of 19 « First 78 9 1011 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2