Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Mid Western Region (http://www.the370z.com/mid-western-region/)
-   -   Oklahoma Thread (http://www.the370z.com/mid-western-region/22088-oklahoma-thread.html)

WhiskeyHotel 10-08-2013 08:36 AM

We visit sporadically. Check out the OKZCC page on Facebook.

Quote:

Originally Posted by mdxj (Post 2519587)
Not a lot of activity on this page... I have seen a few new 370zs in the area so doing a little fishing to see if any are on here


mdxj 10-08-2013 09:17 AM

Already a member. I have been seeing a lot of 370z's around OKC lately but I keep forgetting my cards.

Moemeister 10-08-2013 10:33 PM

I just rolled 52K today :eekdance:

mdxj 10-09-2013 07:40 AM

I'm at 32k now, bought it with 11.5k. Are you Edmond at the oil change place on memorial?

Moemeister 10-09-2013 05:32 PM

Yeah that's me, work in Edmond, live in OKC.

mdxj 10-09-2013 08:11 PM

Ok. I see your car all the time there

tRidiot 10-21-2013 04:16 PM

Looking for some recommendations for shops in the SE OK area. I just ordered rear camber arms and toe bolts to get my Z back in spec after the Swift rear springs have cots me three sets of rear tires.

I could drive all the way to Tulsa I suppose. Fort Smith is an option as well. That's about 30 minutes from me. I am guessing I'll go get the tires put on somewhere close, then be safe to drive up to Tulsa if needed. Currently, my rear tires are not safe to take more than a few miles to the nearest tire shop.

Suggestions, guys?

Thanks!

w4kj4k 10-21-2013 04:28 PM

What's up guys! Just picked up a 12 nismo a week or so ago. Coming from a g35. And loving it so far.

Toe bolt and rear camber takes under an hour to do man! It's easy stuff.

tRidiot 10-21-2013 06:46 PM

Quote:

Originally Posted by w4kj4k (Post 2535662)
What's up guys! Just picked up a 12 nismo a week or so ago. Coming from a g35. And loving it so far.

Toe bolt and rear camber takes under an hour to do man! It's easy stuff.

I keep hearing that... I will talk to my landlord and see if maybe I can use his shop. He has an old Porsche in there, so he probably has a low-profile floor jack, I'd assume. The problem I have is the drilling of the toe bolt holes... I need to do some more research here before I get too serious about drilling holes in my own car. :/

Sure would be nice to spend that money on my next AR build, though! :D

mdxj 11-29-2014 11:46 AM

Bumping this thread from the dead it looks like. The number of 370's around OKC seems to be increasing

w4kj4k 11-29-2014 12:51 PM

Wow! Forgot this page existed!

mdxj 11-29-2014 01:10 PM

Yea, I had to go back several pages to find it

Blighter 06-25-2015 08:48 PM

Quote:

Originally Posted by WhiskeyHotel (Post 2520177)
We visit sporadically. Check out the OKZCC page on Facebook.

Quote:

Originally Posted by mdxj (Post 2520236)
Already a member. I have been seeing a lot of 370z's around OKC lately but I keep forgetting my cards.

Quote:

Originally Posted by Moemeister (Post 2521204)
I just rolled 52K today :eekdance:

Quote:

Originally Posted by tRidiot (Post 2535643)
Looking for some recommendations for shops in the SE OK area. I just ordered rear camber arms and toe bolts to get my Z back in spec after the Swift rear springs have cots me three sets of rear tires.

I could drive all the way to Tulsa I suppose. Fort Smith is an option as well. That's about 30 minutes from me. I am guessing I'll go get the tires put on somewhere close, then be safe to drive up to Tulsa if needed. Currently, my rear tires are not safe to take more than a few miles to the nearest tire shop.

Suggestions, guys?

Thanks!

Quote:

Originally Posted by w4kj4k (Post 2535662)
What's up guys! Just picked up a 12 nismo a week or so ago. Coming from a g35. And loving it so far.

Toe bolt and rear camber takes under an hour to do man! It's easy stuff.

You guys still around? :happydance:

dAroche14 09-17-2015 07:19 PM

Quote:

Originally Posted by Blighter (Post 3239766)
You guys still around? :happydance:

Anyone still active in the OKC area? I won't be back for a few months but I'm looking to get some work done when I do (foot well lighting and aesthetic and things of that nature). Didn't know if there was a good audio shop in town someone trusts to do some wiring.

TJSq 03-29-2016 08:15 PM

anyone in OK on this thread still alive


All times are GMT -5. The time now is 11:24 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2