Quality Sub $1,000 Roll Bar

whis9 · 11-15-2013, 02:56 PM

In for pics

MyKindaGuise · 11-15-2013, 06:50 PM

Quote:

Originally Posted by ResIpsa

Ok. The car is finally done and the price was exactly what they quoted me ($900). Everything looks really good save for one issue that is partially my fault. I asked the cage builder to use the harness bar as the seat back brace (as required for my aluminum ultra shield seat) and this resulted in the bar being mounted too low for the proper shoulder strap angle.

Luckily, this can be cheaply and easily fixed by welding in a section of tube between the main hoop and cross brace. I could have done it right away but I really wanted to get my car back and I had a bet with my wife that it would be done today (she thought it would be another 2 months…). Anyway I had always intended to use the stock seat belts for street driving (because it is actually illegal to drive on the street with a harness). I will make sure this gets done before my first track day.

I am picking up the Z after my wife gets off of work at 4:00 p.m. I will have pictures later tonight.

That's awesome news! Im getting more and more interested everyday.

ResIpsa · 11-16-2013, 10:12 AM

Sorry about the wait. It was dark when I got home and the pictures were not very good. Also, while my car was away I had purchased some carbon fiber cloth fabricated a splitter to replace my old plywood/fiberglass one (weighs about 5lbs compared to 13lbs) . I spent last night trying to see if the mounting system I came up with would work.

And she has been sitting outside all month and really needs a good cleaning (clay bar, polish, wax, etc...).

I promise to post a write up and some pictures in my original post today.

And the shop was EB3 Motorsports in Manassas (really closer to Gainesville) VA. The owner (cage builder) is a great guy who you can tell really loves to build cages.

However, remember he has been building cages for drag cars for decades. He readily admits that he does not do many SCCA or NASA cages (or bars). So make sure that you print out the roll cage requirements for whatever series you run (or aspire to run) when you drop off your car.

ResIpsa · 11-17-2013, 01:46 PM

Pictures are posted in my original post.

ResIpsa · 11-19-2013, 04:51 PM

11-15-2013, 02:56 PM	#16 (permalink)
whis9 Base Member Join Date: Dec 2012 Location: Dayton Posts: 54 Drives: 2003 under the knife Rep Power: 12	In for pics MyKindaGuise likes this.

11-16-2013, 10:12 AM	#18 (permalink)
ResIpsa Track Member Join Date: Apr 2009 Location: Virginia Posts: 564 Drives: 09 RACING HEN Rep Power: 338	Sorry about the wait. It was dark when I got home and the pictures were not very good. Also, while my car was away I had purchased some carbon fiber cloth fabricated a splitter to replace my old plywood/fiberglass one (weighs about 5lbs compared to 13lbs) . I spent last night trying to see if the mounting system I came up with would work. And she has been sitting outside all month and really needs a good cleaning (clay bar, polish, wax, etc...). I promise to post a write up and some pictures in my original post today. And the shop was EB3 Motorsports in Manassas (really closer to Gainesville) VA. The owner (cage builder) is a great guy who you can tell really loves to build cages. However, remember he has been building cages for drag cars for decades. He readily admits that he does not do many SCCA or NASA cages (or bars). So make sure that you print out the roll cage requirements for whatever series you run (or aspire to run) when you drop off your car. Z Stig and MyKindaGuise like this. __________________ The Reed Law Firm; Michael Fasano VA Attorney and Counselor at Law: A Virginia Traffic, Criminal, and Family Lawyer.https://reedlawva.com/

11-17-2013, 01:46 PM	#19 (permalink)
ResIpsa Track Member Join Date: Apr 2009 Location: Virginia Posts: 564 Drives: 09 RACING HEN Rep Power: 338	Pictures are posted in my original post. MyKindaGuise likes this. __________________ The Reed Law Firm; Michael Fasano VA Attorney and Counselor at Law: A Virginia Traffic, Criminal, and Family Lawyer.https://reedlawva.com/

11-19-2013, 04:51 PM	#20 (permalink)
ResIpsa Track Member Join Date: Apr 2009 Location: Virginia Posts: 564 Drives: 09 RACING HEN Rep Power: 338	More pictures posted. __________________ The Reed Law Firm; Michael Fasano VA Attorney and Counselor at Law: A Virginia Traffic, Criminal, and Family Lawyer.https://reedlawva.com/

01-22-2014, 07:40 AM	#21 (permalink)
ResIpsa Track Member Join Date: Apr 2009 Location: Virginia Posts: 564 Drives: 09 RACING HEN Rep Power: 338	Bump for update! __________________ The Reed Law Firm; Michael Fasano VA Attorney and Counselor at Law: A Virginia Traffic, Criminal, and Family Lawyer.https://reedlawva.com/

01-22-2014, 10:55 AM	#22 (permalink)
Z Stig Track Member Join Date: Mar 2010 Location: Brambleton, VA Posts: 917 Drives: SOLD: '10 370Z BC M6 Rep Power: 16	Rollbar looks great! If I ever decide to dedicate this as a track car, I may have to look them up. __________________ SOLD: '10 Sport Touring, Black Cherry: Z1 Stuff, Stillen stuff, kWv3, SPC, UpRev & Pilot Super Sport. Now: 2015 Jeep Cherokee Trailhawk for off-road fun, 2015 BMW 228ix for on-road fun

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roll Bars	AB22EasyTiger	Nissan 370Z Roadster (Convertible)	1	06-03-2012 03:59 PM
Roll tide	n1cd	Sports	4	10-29-2010 10:34 AM
Anyone know the quality of this kit????	370zsport09	Exterior & Interior	17	10-18-2010 11:10 PM
better from a roll?	1974Z	Forced Induction	0	08-29-2010 01:24 PM