Holiday projects?

dmhenderson · 12-17-2012, 02:35 PM

MD emissions are all done by the county - it's not a "State inspection" thing you can get done at a shop.

Zippy chance LTHs would fly around here.

MyKindaGuise · 12-17-2012, 02:40 PM

Quote:

Originally Posted by dmhenderson

MD emissions are all done by the county - it's not a "State inspection" thing you can get done at a shop.

Zippy chance LTHs would fly around here.

PA is county specific for emessions. Its seperate from inspection. If they dont do sniffer tests then youll pass. These throw no codes and all emissions lights give the green light for pass. idk.

XwChriswX · 12-17-2012, 02:48 PM

Quote:

Originally Posted by b1adesofcha0s

Well I only have off for Christmas and New Year's, but no real mod plans for the holidays. Already installed my sway bars 2 weeks ago. Need to swap out the melted headlight lens once it gets warm again outside. Also gonna pick up some Pilot Super Sports for the spring.

End links?

Quote:

Originally Posted by dmhenderson

I acually need to do another set because my girlfriend dinged the hell out of the passenger's side with her heels. They actually dent surprisingly easily :/

Anyway, yeah if I remember right, both plugs were on the passenger side but I could be wrong. It has been a couple years since I've done it.

Fishing the cable isn't too hard - like I said, use a coat hanger and a little bit of electric tape and fish it behind the steeing column.

Yeah, from what I've heard the AL is suuuuper thin. Just to be there to be there.

Quote:

Originally Posted by theDreamer

Yep, the harness plug is on the passenger side.

Ah. Do you route it through the interior, or under the carpet?

Quote:

Originally Posted by dmhenderson

Yeah those would look sharp. My interior LEDs are all already red and the entire car is red/black.

Guess we'll never be able to attend meets together, I'm doing practically the same thing, just at a slower pace.

I want to get my interior LED's to red, but again, no one to do it.

b1adesofcha0s · 12-17-2012, 02:50 PM

I don't think I need the endlinks for now. Haven't really seen much about endlinks failing. Might be something I could do further down the road though.

dmhenderson · 12-17-2012, 02:51 PM

Let me dig. I swapped all of my interior lighting (trunk and dome lights) for red LED pods and they look great with the nismo interior.

Vendor on these forums sold me the pods.

XwChriswX · 12-17-2012, 02:51 PM

Quote:

Originally Posted by b1adesofcha0s

I don't think I need the endlinks for now. Haven't really seen much about endlinks failing. Might be something I could do further down the road though.

I just had mine done at the same time since they already had them there and had the car on the lift. Might as well..

XwChriswX · 12-17-2012, 02:52 PM

Quote:

Originally Posted by dmhenderson

Let me dig. I swapped all of my interior lighting (trunk and dome lights) for red LED pods and they look great with the nismo interior.

Vendor on these forums sold me the pods.

Oh I have the LED's, I thought you meant like the gauges and such, from that shitty orange to Red. I have the LED dome lights, and a brighter white in the trunk.

dmhenderson · 12-17-2012, 02:54 PM

Yeah all of my gauges still glow orange. I didn't change that stuff.

dmhenderson · 12-17-2012, 02:55 PM

I actually have a red LED for the license plate but I don't drive around with it because I don't want to be pulled over.

XwChriswX · 12-17-2012, 03:05 PM

Quote:

Originally Posted by dmhenderson

Yeah all of my gauges still glow orange. I didn't change that stuff.

That's the stuff I'd like to change... Orange to Red. I think it would look sick. Red numbers with white needles, or white hashes and red needle.

Quote:

Originally Posted by dmhenderson

I actually have a red LED for the license plate but I don't drive around with it because I don't want to be pulled over.

Agreed, just left that white. What I really need to get swapped is the turn signal orange bulbs to white.

dmhenderson · 12-17-2012, 07:21 PM

Yep I have chrome blinker bulbs too.

sparky · 12-17-2012, 09:22 PM

Yes the kickplates are prewired and plug in on the passenger side. I believe this is to tap it into the body control module so they go out when the door is closed.
Changing the Leds is the easy part. Getting the kickplates apart to do it looks like the hard part. Instead of removing each LED I'm going to look at some strip tape I have and see if it fits. This can be cut every 3 leds so the piece will only be a few inches long.

4r3s · 12-18-2012, 06:52 AM

Quote:

Originally Posted by dmhenderson

Ok so my shopping is done. Girlfriend doesn't get time off but my last day of work is Thurs and I'm off until the 7th. I'm going to go insane by day 4.

Plans so far:
-Order another 25 sq feet of GTmat stuff and install.
-Clay bar/3 stage wax/polish.
-Fluid check
-Oil change
-Buy halo 4 and resident evil 6. Dust off Xbox
-drink heavily
-shop for a new watch. That new movado bold titanium orange thing looks slick.
-???

When can I drop the car off, and

Quote:

Originally Posted by dmhenderson

They are completely pre-wired and takes 10-20 minutes to install. My dog could install them

Sent from my iPhone using Tapatalk

How much does he charge?

4r3s · 12-18-2012, 06:58 AM

I have no car plans right now, having a new mortgage kinda curbed the whole spending money on the car thing. Oh wait I do have plans, taking the car in to get the tpms for the winter setup configured...exciting!

If I had money to spend on the car I'd be thinking about sway bars and coilovers. I need to figure out how to fix the curb in my driveway so I don't scrape as much and I need to get a normal daily driver first though. I'm sure something else will come up that I will have to throw money at before I can get to any of this though....

shadoquad · 12-18-2012, 07:52 AM

Quote:

Originally Posted by dmhenderson

They are completely pre-wired and takes 10-20 minutes to install. My dog could install them

of amazing install dog in action!

12-17-2012, 02:35 PM	#31 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	MD emissions are all done by the county - it's not a "State inspection" thing you can get done at a shop. Zippy chance LTHs would fly around here. __________________

12-17-2012, 02:50 PM	#34 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	I don't think I need the endlinks for now. Haven't really seen much about endlinks failing. Might be something I could do further down the road though. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

12-17-2012, 02:51 PM	#35 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Let me dig. I swapped all of my interior lighting (trunk and dome lights) for red LED pods and they look great with the nismo interior. Vendor on these forums sold me the pods. __________________

12-17-2012, 02:54 PM	#38 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Yeah all of my gauges still glow orange. I didn't change that stuff. __________________

12-17-2012, 02:55 PM	#39 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	I actually have a red LED for the license plate but I don't drive around with it because I don't want to be pulled over. __________________

12-17-2012, 07:21 PM	#41 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Yep I have chrome blinker bulbs too. __________________

12-18-2012, 06:58 AM	#44 (permalink)
4r3s A True Z Fanatic Join Date: Dec 2009 Location: MD Posts: 2,077 Drives: Touring 370z Rep Power: 24	I have no car plans right now, having a new mortgage kinda curbed the whole spending money on the car thing. Oh wait I do have plans, taking the car in to get the tpms for the winter setup configured...exciting! If I had money to spend on the car I'd be thinking about sway bars and coilovers. I need to figure out how to fix the curb in my driveway so I don't scrape as much and I need to get a normal daily driver first though. I'm sure something else will come up that I will have to throw money at before I can get to any of this though....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Starting some projects!	nismochiq	Exterior & Interior	18	11-12-2012 06:22 PM
Plasti dip projects	ericzmyers	Exterior & Interior	7	08-18-2012 03:04 PM
A Couple Recent CF Projects...	Carbon Fiber Element	Exterior & Interior	10	01-20-2011 08:05 AM
First Z Project: Prepping for the rest of the projects	CBRich	Nissan 370Z General Discussions	14	06-21-2009 05:59 PM