I did a lot of research tonight... and I finally know what to do with my stock Navi. I need to purchase a Navtool and a mirrorcast wifi device. I may have to put my headlight on hold until I sell my Zele carbon fiber front lip (extra). So the Navtool will allow me to use my backup cam (automatically comes on when it is in reverse) without partially having my ebrake on, pressing the aux button, and the mirrorcast will allow a mirror image of my smart phone. Here's an example on youtube https://www.youtube.com/watch?v=59Kc9CUxMqU. Compared to upgrading the Navigation for $225 at the dealership and buying a bypass kit for $180.

also, I found a blind spot sensor for about $120 that I want to buy and install later... since our cars our so bad especially at night... I got spoiled driving a rental car with all of these features...

That sucks. Good luck!

Were you hoping to use the factory touch screen to operate the mirrorcast or does the mirrorcast use the phone for the control interface? Also how are you planning on doing sound? I ask this because I looked into Navtool awhile back. If I remember right Navtool only does video.

Would you be interested in deleting the factory Navi? I’m fed up with the factory nav system too and really want Apple Carplay in my Z (specifically I want to run an Alpine iLX-007 Alpine-USA.com iLX-007) so I also have been doing a lot of research.

I recently down loaded the service manual for the 2009 370Z and have figured out how to delete the factory nav. It’s all theory at this point because I'm out of country and cannot test it on my Z. Every one says it can't be done but I think they are wrong. It is definitely not a plug and play mod. It will require a custom made wire harness, adding pins to a connector, building a connector, buying the non-nav A/C vent controls (eBay) and a complete deletion of the whole stereo system except the wiring harness. This means you would have to do a complete aftermarket stereo install, wires, power, head unit, speakers, everything. If you are worried about making permanent changes, my plan will retain the ability to put the stock system back in. If you are interested I can do a write up and send it to you. Let me know. :tup:

Yea i have the regular halos for the headlight like last time i bought. Whats the size for the turn signals? Ill buy two sets.. One for the practice headlights then a set for my turn signals

And im fine going half on the dremel. Ill check my schedule to see what sunday im off.


I was thinking thou of wiring both halo sets to the LED lights like vabam has...

I also bought the "always on kit" for the bottom leds from ijdmtoy, so i wanna do that also

Wish vabam was here cuz he wired his to his LED daytime running lights, which is what i want to do

Right now I manually turn my lights on and off. My lights are wired to a switch in my center consol and are tapping power off a constant on source. Had to run wire all the way from my center consol to both headlights. Been meaning to wire in a relay to the hand brake so that when the hand brake is disengaged the halos and rear “fog light” turn on. Or put the relay on the ignition circuit so that when the car is on the lights are on.

See i want the halos wired to the leds cuz 1... If u just turn on the car the leds dont come on... (Like if im sitting there at night and dont wanna be seen)


However as soon as u move the car out of park the LEDs come on and i love that. If i can have that same thing with the halos but they stay on when the headlights on that would be perfect

I am keeping my Navi. the mirror cast uses the phone interface not the Navi. I also found a UK 370z forums and one of the admin makes a bypass kit. I will buy the wireless mirrorcast with audio/video.

There is a guy that got rid of his factory navigation. It's in the interior modification section. All you need is the base model a/c vent controls and chubby. Your light will still work...

the turn signal should be 70mm. I can tap the halos to the drl... we just need more wire. I got to look at the "always on kit"...

Alright ill go to order the 70mms right now. I dont need demon eyes so im good on that... As in the wire... Ill leave that to u the professional lol.

And yea the always on kit is wire and a few clips, no instructions :rofl2:

Already have the controls but I do not plan on getting the cubby. Since that Alpine iLX-007 is mechless and only 3 inches deep I plan on putting it were the nav factory screen goes. Found that tread you were talking about. Since its only 5 days old I didn't see it. Thanks for pointing it out! The area where the radio would normally go I plan on mounting my Racelogic and EDFC controllers there. They are a little in the way with the factory Nav.

I know this might be a reach, but... my husband wants a black Z, and mine is white. Does anyone want to trade? �� if you're interested, drop me a pm :)

Lol if only it was that easy

Hey, no harm in trying! ^-^ lol, I'm perfectly aware it's a slightly ridiculous idea, trading Zs, but I'm a generally ridiculous person so

Lol..painting not an option?