Nissan of Bowie Meet

eastwest2300 · 03-24-2012, 05:20 PM

Quote:

Originally Posted by Cristobal09

Thats funny, I had a hell of a time trying to get my post maf tubes on as well, but it only took me about 45 minuters. Nearly broke my finger trying to pry it on.

Dude, it was like pulling teeth.. haha, and the rain DID NOT Help..

XwChriswX · 03-25-2012, 05:54 AM

Quote:

Originally Posted by eastwest2300

Just got home, it was good seeing everyone as always... Bobo and Chris installed my MAF tubes, it was a total pain in the AZZ, but after several hours we got it done!

That's how things usually turn out but he had a lot of factors impeeding our progress so it's not a 'typical' MAF Tube install.

Quote:

Originally Posted by Triple's

I know Chris had plenty of Ketchup

I actually didn't have anything to eat since I wasn't going to till the install was done, and as soon as it was done the bottom fell out so it was time to roll out.

Quote:

Originally Posted by eastwest2300

Dude, it was like pulling teeth.. haha, and the rain DID NOT Help..

Did you remember to do the negative terminal ECU Reset when you got home?

XwChriswX · 03-25-2012, 05:56 AM

Brian were those Dynos before/after a tune, or before/after a certain mod? OR a Baseline/Current? There's a lot of space between the lines.

eastwest2300 · 03-25-2012, 05:20 PM

Quote:

Originally Posted by XwChriswX

That's how things usually turn out but he had a lot of factors impeeding our progress so it's not a 'typical' MAF Tube install.

Did you remember to do the negative terminal ECU Reset when you got home?

Yes sir, I actually just got done doing the ECU reset, then I took her to the gas station, topped her off, and did what you said, and drove her pretty good. I like it, lots and lots fun.

Thank you soo much Chris and Bobo, Im sending yall some Rep.

ak6ar · 03-25-2012, 06:27 PM

Ok after seeing everyone without their front plates I had to take mine off. I love the look without the plate. Well then I had the two stupid holes in the front plastic.

So I went out to autozone to see if I could find something to plug it with. I found some plastic panel retainers (Dorman 963-045 for Chrysler, Ford, GM Panel Retainers) at autozone for $2.50. Two of them were perfect fits, and the color matches almost exactly the magnetic black of my Z. It looks really like they are meant to be there.

I would get pics, but it's getting dark outside.

If anyone else is looking for something to cover those holes, you should try these out.

b1adesofcha0s · 03-25-2012, 09:20 PM

Quote:

Originally Posted by ak6ar

Ok after seeing everyone without their front plates I had to take mine off. I love the look without the plate. Well then I had the two stupid holes in the front plastic.

So I went out to autozone to see if I could find something to plug it with. I found some plastic panel retainers (Dorman 963-045 for Chrysler, Ford, GM Panel Retainers) at autozone for $2.50. Two of them were perfect fits, and the color matches almost exactly the magnetic black of my Z. It looks really like they are meant to be there.

I would get pics, but it's getting dark outside.

If anyone else is looking for something to cover those holes, you should try these out.

Awesome I needed those for the holes in my front bumper too.

Sndtgr08 · 03-25-2012, 09:28 PM

I refused to drill my bumper in the 1st place. I have had 3 warnings about the plate in my window. I was told to "mount" it to the car....I installed a Show N Go this weekend. It takes about 5 seconds for my plate to flip out. By the time the fuzz gets to my window I'm ready.

"What do you mean no front plate?!?!? Did some one steal it? Can I see? .....What are you talking about officer? Its right there!"

ak6ar · 03-25-2012, 09:42 PM

Quote:

Originally Posted by Sndtgr08

I refused to drill my bumper in the 1st place. I have had 3 warnings about the plate in my window. I was told to "mount" it to the car....I installed a Show N Go this weekend. It takes about 5 seconds for my plate to flip out. By the time the fuzz gets to my window I'm ready.

"What do you mean no front plate?!?!? Did some one steal it? Can I see? .....What are you talking about officer? Its right there!"

LOL

Which one did you install?

03-25-2012, 05:56 AM	#3 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 454	Brian were those Dynos before/after a tune, or before/after a certain mod? OR a Baseline/Current? There's a lot of space between the lines. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

03-25-2012, 09:28 PM	#7 (permalink)
Sndtgr08 Base Member Join Date: Sep 2011 Location: Virginia Posts: 162 Drives: 2009 A/C 3.5 MT Rep Power: 15	I refused to drill my bumper in the 1st place. I have had 3 warnings about the plate in my window. I was told to "mount" it to the car....I installed a Show N Go this weekend. It takes about 5 seconds for my plate to flip out. By the time the fuzz gets to my window I'm ready. "What do you mean no front plate?!?!? Did some one steal it? Can I see? .....What are you talking about officer? Its right there!" Last edited by Sndtgr08; 03-25-2012 at 09:32 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fontana Nissan Big Meet III	zero	Southern California Region	44	06-28-2011 05:05 PM
nissan meet for all nissan annversarys	danielcast	40th Anniversary 370Z	6	07-24-2010 07:23 PM
Spotted Monterey Blue 370Z Bowie Town Center	ZCarMan	Mid-Atlantic Region	0	07-16-2010 08:15 PM
[Hou] All Nissan Meet Host by ZCoH & Baker Nissan/Baker Tuning	Robert_K	Texas	36	07-12-2010 06:56 AM
Greensboro Nissan Z/G/GTR Meet - 2/13/10	HKYStormFront	South East Region	21	02-10-2010 07:24 AM

03-25-2012, 06:27 PM	#5 (permalink)
ak6ar Base Member Join Date: May 2011 Location: Washington DC Age: 52 Posts: 55 Drives: 11 Z MB MT Rep Power: 16	Ok after seeing everyone without their front plates I had to take mine off. I love the look without the plate. Well then I had the two stupid holes in the front plastic. So I went out to autozone to see if I could find something to plug it with. I found some plastic panel retainers (Dorman 963-045 for Chrysler, Ford, GM Panel Retainers) at autozone for $2.50. Two of them were perfect fits, and the color matches almost exactly the magnetic black of my Z. It looks really like they are meant to be there. I would get pics, but it's getting dark outside. If anyone else is looking for something to cover those holes, you should try these out.