AAM Competition, LLC - Company Launch!
 

Hello Mid-A,

AAM Competition, LLC is excited to announce the opening of a state-of-the-art 17,000sqf Full service, Fabrication, CNC Machining, and Dyno-tuning Facility in Annapolis Junction, Maryland. AAM Competition will strive to provide the automotive specialty industry with premier aftermarket services and products for Nissan and Infiniti vehicles.
<br>
As of April 19th we will be fully functional ready to provide AAM Competition components and services the Nissan/Infiniti community. Over the next few weeks updates will be posted at www.AAMCompetition.Com including details for the official Grand Opening Party which will take place at AAM Competition May 15th!

If you have any questions or would like to place an order or schedule service, AAM Competition, LLC can be reached via e-mail at sales@aamcompetition.com and by phone 301.497.9212. Or simply swing by the shop :). We are located at 9015 Junction Drive Suite 5,
Annapolis Junction, Maryland 20701

http://farm3.static.flickr.com/2797/...fb278315_b.jpg

Here are a few shots of the facility being set-up and built:

http://farm3.static.flickr.com/2536/...8e3242d2_b.jpg

http://farm5.static.flickr.com/4065/...890a9ea0_b.jpg

http://farm5.static.flickr.com/4004/...992ab614_b.jpg

http://farm5.static.flickr.com/4039/...07ddf6f6_b.jpg

http://farm3.static.flickr.com/2773/...7a97b13d_b.jpg

http://farm5.static.flickr.com/4072/...005eabab_b.jpg

http://farm3.static.flickr.com/2701/...dfbc489b_b.jpg


Regards,
<br>
Clint
AAM Competition
ClintonM@AAMCompetition.com

Nice warehouse you got there! Just joined your facebook group :)

Good to hear guys! Can't wait to check out the new shop.
Not so much of a drive for me now.

:tup:

Soooooo awesome! :tup: Def looking forward to that Grand Opening party! :rock:

Sweet

Best wishes to you guys Clint! Glad to hear you haven't driven off into the sunset. ;-)

bump - Hey Mid-A... hope you all stop by for the Grand Opening!

where is Annapolis Junction?

Holy Crap! Impressive shop machinery. Holy Crap!

Wow that shop looks awesome! I never got a chance to come check out the shop in Gaithersburg but this is really close to me so I will have to come to the grand opening and check it out.

When is the grand opening party supposed to be??

Nevermind, just saw may 15th :)

lol soooooo paul where is where is Annapolis Junction

Near Arundel Mills, Hanover, Linthicum area

Clint, would you guys have the capability of machining off excess metal on a VQ35DE lower collector, similar to what Motordyne does with the MREV2?

thank you sir

Buyer beware on this company. Do your Research on AAM (Altered Atmosphere) before you take your Z or G or GTR there.

Satisfied customer here.

Couldn't be happier.

Nothing but good things to say here. Take your negativity elsewhere troll...

Point made. Now can we cut the crap? The one thing that makes this forum great is that everyone here is an enthusiast. We love cars. We love our Zs. If you have a point, then make it and then move on or stay and share with everyone what you love about your car.

Most of the 350 guys that post here are cool, but now you know why I normally try to avoid the 350 forums. ;-)

Looks like a great shop. Hopefully I can stop by one of these days (even thought I'm busy 7 days a week :() I wish you guys good luck with the new shop :tup:

Hi Mdracer76, please create a new thread with actual issue that's related to you. No need to clutter up their announcement thread. Thanks.

I would not have called it clutter... Looked like valid discussion to me? I've said my part... For details see me at any meet, where the truth can't be moderated :)

Yawn... I can see why you were banned now...

You do? I've not violated any TOS on this site. It's not like I've called you a 'troll' ;) Let's keep things on topic (and civil) like the admin has sugessted.

Either make a new thread with details about your "experience" with this shop or leave. We do not moderate people on this forum unless you break one of the rules, I am not going to mention any shop/vendor/etc. specifically but have had plenty of negative posts towards a shop or vendor here and we are 100% happy people do it, some of the shops/vendors have left or closed because of what happened here.
But when you come on here just claiming with no proof and just say things like, "For details see me at any meet, where the truth can't be moderated," it creates doubt in your post.

To AAM Competition, congrats on the bigger new shop.

Wow! Thanks for your 2 pennies. I will definitely do all of my research BEFORE taking my vehicle to AAM Competition on their opening day for any services or parts purchases.

I really appreciate your insight of 12 posts and will take that into consideration! :tup:

Thanks to all of you for your support and hope to see all of you soon!

Lunch break at work... oh what to do...

So I dropped by the new AAMC today, just to get out of the office. Although everything is still getting setup, I met several (if not all) of their employees. Everyone was EXTREMELY friendly, took me on a nice tour of the shop. I stayed about 75min and had a great time. Thanks for the hospitality!

The new building is just huge. Alot of the walls are up now, so the pictures are semi old.

If you get a chance to stop by BEFORE the grand opening, make sure to check ou the mural :pics:

ROFL.. Thanks for your insight with 7 posts.

I'm not wasting any more time on this. some folks will have to learn the hard way.

Nice Mike! I'll have to try and get a chance to check it out this week. BTW I thought you meant Anne Arundel Medical Center when you said AAMC hahahaha woops!

we should try and get a meet going paul for this week at mangs

Gonna start a Mid-A Epic Randomness Thread on here...Hahahaha


Clint, Will, Mike, anyone....any word on your machine work? Can you use your CNC, etc to machine some aluminum off the top two runners of my lower collector? I'm sure you all are familiar with Motordyne's MREV+, MREV+2, MREV2, etc etc. This is basically all I'm trying to do. Just curious if you guys can do it.

Do it! I thought we had something similar but I couldn't find one. :tup:

LOL, my dad works right across the street from AAM at Lockheed!

start it paul

Just did my man :)

Our CNC machine is up and running! Please bring the piece by and let's see what you want done!

P.S. Sorry about not posting earlier... Just trying to get caught up with many things...

CAPS.....1 more game!! :tup:

Good Friday Morning ALL! We appreciate all of your continued support and can't wait for the Grand Opening!!

Hey, I swung by yesterday, but was a little too late. Everyone was just closing up and headed out. But I did get to meet Will, and he seemed like a really nice guy. I'll def have to make it a point to get to the grand opening, if not sooner than that to check out the shop during business hours. It is literally right next door to Lockheed Martin, so if you see that, use it as a landmark!

Rob, thanks for the response, I'll have to bring the lower collector in with me one day when I swing by so you all can check it out. I basically just want about 4mm of aluminum removed off the top of the two front runners.