Nissan 370Z Forum - NOVA: Zs & Coffee - Starbucks every Saturday @ 10AM

- - NOVA: Zs & Coffee - Starbucks every Saturday @ 10AM (http://www.the370z.com/mid-atlantic-region/13938-nova-zs-coffee-starbucks-every-saturday-10am.html)

Cristobal09

11-30-2011 05:44 PM

Quote:

Originally Posted by ZCarMan (Post 1429909)

I had my alignment checked after letting the spring settle for couple weeks and needed a camber kit. I went with both front and rear with rear toe bolts. Each Z is different in how they drop so you need to have the alignment checked to be sure.

How will you know if you really need them? Do you get an alignment, and if they cant align it properly, then they need to install camber arms?

eastwest2300

11-30-2011 06:10 PM

Quote:

Originally Posted by b1adesofcha0s (Post 1429930)

You can get the CAI used for $300 like I did, it works just as good :tup:

Im definitely all about saving cash, just like you!

b1adesofcha0s

11-30-2011 06:34 PM

Quote:

Originally Posted by eastwest2300 (Post 1429968)

Im definitely all about saving cash, just like you!

Yeah I got both my exhaust and intakes for about half of their retail cost :tup:

eastwest2300

11-30-2011 07:06 PM

Quote:

Originally Posted by b1adesofcha0s (Post 1429994)

Yeah I got both my exhaust and intakes for about half of their retail cost :tup:

Nice! Im working on a deal for the CAIs.:tup:

Masa	11-30-2011 07:08 PM

Quote:

Originally Posted by b1adesofcha0s (Post 1429838)

That exhaust is looking good Ron :tup:

Quote:

Originally Posted by eastwest2300 (Post 1429873)

:iagree:

Ron, that car looks smooooooooth!:happydance:

Thanks guys! :tiphat:

I actually took my coworker who owns a Challenger SRT-8 for a drive and he was surprised how deep it sounded, even has that burble at low rpm.

Quote:

Originally Posted by Cristobal09 (Post 1429916)

whew, the exhaust looks like its awfully low. Any scraping issues with the swifts? Not that it really matters now, but my driveway is going to be real fun to back out of.

I won't lie, they ARE low. I measured and I have like 3 inches of ground clearance but the way they sit is right inside the rear wheels so there is very little chance of bottoming out.

As for your driveway, may want to check out Bridjit curb ramps. I got a set for my driveway and they work perfectly. :tiphat:

Amazon.com: BRIDJIT 3 Piece Curb Ramp Set, 12' of Driveway Coverage: Industrial & Scientific

b1adesofcha0s

11-30-2011 07:08 PM

The savings from getting them installed at Kirk's Garage also helped a lot :tup:

Yo Kirk, you showing up to the meet this Saturday? I heard you challenged Lou's GT-R to some linear acceleration experiments :bowrofl:

Kirkster

11-30-2011 07:43 PM

Quote:

Originally Posted by b1adesofcha0s (Post 1430061)

I will be there as long as I don't have to make an emergency trip way down south... Boost is sitting at 9.8psi in 50° weather...

b1adesofcha0s

11-30-2011 07:47 PM

Quote:

Originally Posted by Kirkster (Post 1430099)

I will be there as long as I don't have to make an emergency trip way down south... Boost is sitting at 9.8psi in 50° weather...

Cool, hope to see you there :tup:

Vapiano

11-30-2011 09:48 PM

Quote:

Originally Posted by Masa (Post 1429824)

Here's a back shot of my car on Swifts.

Camber arms are really a hit or miss. Me and Shahid didn't need them but I know Bert and Jon did. Each car is slightly different. :tup:

http://img853.imageshack.us/img853/8981/img0581a.png

Lookin' veddy noice!

eastwest2300

11-30-2011 10:07 PM

Quote:

Originally Posted by b1adesofcha0s (Post 1430061)

Yo Kirk, you showing up to the meet this Saturday? I heard you challenged Lou's GT-R to some linear acceleration experiments :bowrofl:

NICE!!!!!! I got the camera!!!:tup::happydance:

birdmanx1

12-01-2011 07:47 AM

Quote:

Originally Posted by Masa (Post 1429824)

http://img853.imageshack.us/img853/8981/img0581a.png