Lsd install help!!

mad_jelly · 05-29-2015, 08:59 PM

Most performance shops will be able to do it. A differential is a differential.

If you're just doing a differential, its should be around $500. If you're doing ring and gears as well, its going to be more like $800/900 and there is no guarantee that the shop is going to do it right. Once you remove the pinion, that bastard will need to be reshimmed and most performance shops won't have the proper shims readily available.

I ate up my gear ring because I didn't shim my pinion properly. Car ran fine, was just a little loud. After a year, I ended up having to change out the gears anyways for FI.

As long as you don't plan on changing out the gears (aka. removing the pinion), its really not bad. Not sure what you mean by timing? The only thing you need to keep track of is the bearing gaps for the side bearings.

Tools will def help. You will need a pretty decent impact to remove the gear ring though. If you can drop the differential, I can help remove the gears and press the bearings off the LSD. PM if you're interested.

Some resources I found useful:
Pirate4x4.Com - The largest off roading and 4x4 website in the world.

DIY - Quaife LSD INSTALL - PICS! - MY350Z.COM Forums

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LSD install in ct, ma ri.	Masterbeatty	North East Region	0	03-01-2014 12:22 PM
ark install	roy'sz	Intake/Exhaust	4	11-12-2012 11:13 AM
HID install went bad :/	370zmarc	Exterior & Interior	0	03-07-2012 01:38 AM
Can I get some install help in the GTA?	Jjaden	Canada	30	06-28-2011 07:14 AM
Help with My Install	LinPark	Audio & Video	15	08-08-2010 08:28 AM

05-29-2015, 08:59 PM	#2 (permalink)
mad_jelly Base Member Join Date: Mar 2012 Location: VA Posts: 56 Drives: 84 Mazda GLC Rep Power: 14	Most performance shops will be able to do it. A differential is a differential. If you're just doing a differential, its should be around $500. If you're doing ring and gears as well, its going to be more like $800/900 and there is no guarantee that the shop is going to do it right. Once you remove the pinion, that bastard will need to be reshimmed and most performance shops won't have the proper shims readily available. I ate up my gear ring because I didn't shim my pinion properly. Car ran fine, was just a little loud. After a year, I ended up having to change out the gears anyways for FI. As long as you don't plan on changing out the gears (aka. removing the pinion), its really not bad. Not sure what you mean by timing? The only thing you need to keep track of is the bearing gaps for the side bearings. Tools will def help. You will need a pretty decent impact to remove the gear ring though. If you can drop the differential, I can help remove the gears and press the bearings off the LSD. PM if you're interested. Some resources I found useful: Pirate4x4.Com - The largest off roading and 4x4 website in the world. DIY - Quaife LSD INSTALL - PICS! - MY350Z.COM Forums