Nissan 370Z Forum - cv129's slow build

Page 3 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Member's 370Z Gallery (http://www.the370z.com/members-370z-gallery/)

- - cv129's slow build (http://www.the370z.com/members-370z-gallery/82261-cv129s-slow-build.html)

cv129

09-20-2015 02:38 PM

3 Attachment(s)

Also added 13mm spacers and ARP extended studs. Studs were trimmed back to length, I wanted to retain the stock look and the stock lug nuts.

Front tires are 265/35/19. Rear tires are 285/35/19. Stock alignment.

Rusty

09-20-2015 06:41 PM

Quote:

Originally Posted by cv129 (Post 3313592)

ZSpeed aluminum undershroud is finally here!

Stock undershroud was getting beat up. Homemade fix until the new undershroud arrived. The middle three clips wouldn't hold any more. Sealed off all holes to prevent flapping noise from bad air flow.

One bad thing about the stock plastic shield is its elasticity. When heated up (engine heat, Texas summer), and the middle three clips not holding any more, the shield will sag with the middle section hanging quite low. You can see my home made fix was taking a beating.

Nice. You need to do my fix. PM me your address, and I ship you a couple of the nuts, when I get home next week. ;)

http://www.the370z.com/exterior-inte...nder-tray.html

edzilla123

01-31-2016 12:49 PM

Did they have a 285/30/19 ? would have been pretty close in side wall hight with a 30 i believe

cv129

06-01-2016 01:50 PM

1 Attachment(s)

Quote:

Originally Posted by Rusty (Post 3313676)

Nice. You need to do my fix. PM me your address, and I ship you a couple of the nuts, when I get home next week. ;)

http://www.the370z.com/exterior-inte...nder-tray.html

Rusty's contribution deserves its own post!

Got these quite some time ago, just never posted it up. Thanks Rusty :tiphat:

cv129

06-01-2016 02:01 PM

2 Attachment(s)

RacingBrake rotors. Bought from Mr. Synolimit. Protective coating still on.

Whiteline diff bushings. Bought two sets of these, first set already went on wife's car (OEM bushing busted at 40k miles). Car feels great now :driving:

cv129

06-01-2016 02:09 PM

2 Attachment(s)

ARK R-Spec TP. Used, from Mr. pRoJeKTxZ. Can't wait to un-chock the VQ!

cv129

06-01-2016 02:13 PM

3 Attachment(s)

Shiny oil pan!!!! CJ Motorsports baffled oil pan. Bought from Mr. DR_ .

Rusty

06-01-2016 02:33 PM

Quote:

Originally Posted by cv129 (Post 3490791)

Rusty's contribution deserves its own post!

Got these quite some time ago, just never posted it up. Thanks Rusty :tiphat:

Did you get these installed yet?

You'll like the Racing Brake rotors. If you look at the rotor rings. You will see a dimple where they checked the hardness on them.

cv129

06-01-2016 02:39 PM

^ nah not yet....I know, this "build" is slow as snail haha.

httorihanzo

09-24-2016 04:20 PM

would love to know brand of these .they arent on vorshlags site

Quote:

Originally Posted by cv129 (Post 2572713)

Beauty shots of arms and coilovers

http://i773.photobucket.com/albums/y...ps3df4b1de.jpg

http://i773.photobucket.com/albums/y...psa28c05f2.jpg

Things that came out
http://i773.photobucket.com/albums/y...ps3fb6edc5.jpg

I took some pics myself in my living room, but theirs are much nicer

KE_1508

01-26-2017 04:58 PM

Nice Nismo!

All times are GMT -5. The time now is 03:00 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page