TerribleONE's UPDATED build progress
 

Hey guys, its been a LONG time since I have posted anything on my build as it has taken much longer than originally anticipated. But anyways as of now this is what mods I have either purchased/installed

Engine/drivetrain
Fast Intentions prototype TT kit (see build thread here)
Fast Intentions 3" TDX exhaust
Turbosmart E-boost 2
BIG thanks to Specialty Z for their RSP clutch setup
setrab 25 row oil cooler
OS Giken LSD
Uprev

suspension/brakes/wheels
Matte Black TE37 19x9.5/10.5
Michelin PSS 255/35/19 305/30/19
KWV3
Whiteline sways
Akebono BBK
Endless pads (cant remember exactly which ones)
Z1 stainless lines


misc.
Kellyfields hood damper kit
zenclosures 12" sub box
full Powerhouse Amuse body kit
passwordjdm shift knob
carbonsignal interior kit (have a lot to post up on these guys but dont have the time right now I will say buyers BEWARE)
JW 12w3
Pioneer HU

upcoming mods within the next few months:
180 headlights
Bride's
Second set of wheels to roll around on (20"s and at least a 4" lip. Still not decided on a wheel yet)
Full vinyl wrap matte red
Vented fenders (undecided on which ones)
Vented hood (undecided)
JW motoring interior kit

Dreams:
Cage the car
Widebody
Strip as much weight as possible while still retaining a streetable interior
Build the motor to reliably hold 675-700whp

here are some pictures of progress on the TT kit as well as a little teaser on the wheels/tires/bodykit. The plan is to be on the dyno tomorrow so stay tuned for more info and TONS more pictures :)

http://i47.tinypic.com/whbbjn.jpg

http://i49.tinypic.com/2ynnssp.jpg

http://i48.tinypic.com/2j5gplk.jpg

http://i46.tinypic.com/bzcpf.jpg

http://i50.tinypic.com/c72fn.jpg

http://i49.tinypic.com/1z2zu9x.jpg

Dyno/track Videos

(the video below is not cut or edited. Once I have all the video I will edit up a nice little movie for you guys)







this shows how useless the 305 michelin PSS's are..

http://i47.tinypic.com/20r7ihv.jpg


will have more up later/tomorrow

That is a serious build! Seems like a lot is going on behind the scenes of this forum haha. Car sounds like it is going t be amazing. NX is getting a GTM 16G kit, I'm getting a GTM Twin SC kit, BP's kits are out in the wilds getting installed, Navyboy just got his car back from a full cam, head job. Exciting times. Everyone is getting ready for the summer! Can't wait to see your results tomorrow.

Awesome man!

Hey nice build. Just an FYI, pss now has 265/35/19...I am assuming you got 255 because 265 was previously not available.

That is precisely why! thank you for the heads up. I will definitely go up to a 265 after this set

nice build bud!

Thanks for the kind words guys. I am beyond excited for tomorrow I hope I am able to sleep. lol

I see you are in vegas, next time when im out there I will have to bring the Z and we can meet up and take a look at each others kits!

Hell yes! I'll be home in August, I'll be picking it up from GTM when I get home. They will be holding it for me after they complete the work.

Sounds good I am sure I will be out there sometime not much after that. Would be great to get the cars together I can bring camera equipment for a nice little photoshoot as well!

I can definitely make time for that. I can bring you to my local shop, cheap dynos and usually pretty sweet cars that roll in. on FB, look up Force Fed Racing. mostly Honda stuff, but they have a Supra following too.

Sounds great to me! Heres a few more teasers for you guys :)

Nice build!! Can't wait to see it finished.

seems like an awesome built in making, subscribing

Sweet can't wait to see it on the dyno and when its done!

Looking good...How much lower than stock are you going? Something like a swift spring drop around 1" or so??

Yea just enough to get rid of the wheel gap. Coils will not go on the car until the Amuse is installed so I can see how much room I have to work with. I heard the bumper already drops the front about 1" Hope to have the Amuse on next week, as things fell behind as they usually do when it comes to this kind of thing.

Update,

Just finished dyno testing with Fast Intentions full 2.5" turbo back. The fuel pressure is dropping in the high end and we are going to sort that out. Here is what we have so far.

91 Octane:
469 RWHP
382 FT LBS of Torque
Roughly 7-7.5 PSI

quoted from tony.. I am beyond excited and cannot say enough about the crew at Fast Intentions and Specialty Z. It is almost 1:45 here and I am so excited I feel like I wont be able to sleep all night!

WooT, CG's! Can't wait to see it get sorted out. There a dyno chart for this?

I am sure we should get charts up either today or tomorrow. We were running on the dyno until real late. The car is tuned and drivable however we know it will make more power without the fueling issue up top. Hoping to get this fixed today and we will be putting in 103 octane and MOAR BOOOOOOOST

Car performed awesome all day yesterday and once again I cant say enough about the crew over at F.I. I will have a bunch of pictures, videos, and a little write up soon!

coils and the powerhouse amuse will be going on within the next week or so!

Dat A$$ :yum:

orignal post updated..

Turbosmart E-boost 2 arrived!! the plan is to be back on the dyne tuesday of next week. We are 99.9% sure we got the fuel issue resolved.

http://i50.tinypic.com/11izpti.jpg

updated with some new videos which some of you may have already seen.

What was the fuel problem, and what was the fix? Just curious.

can't wait to see the amuse put on!

You and me both brother. Should really set the car off especially with the front mount!

http://i48.tinypic.com/33djqxl.jpg

Guess my car made 388 wtq.. haha it was a late night and I had way to much going through my head. The first few pulls on this graph were with sebastian still doing some adjustments and the dip at 6500 was the fuel issue I was talking about but you can see the AFRs stay safe. We are 99.9% sure we have this issue resolved and will be back on the dyno on tuesday. Remember this is on wastegate spring pressure only (5.5lb spring)

I will have official dyno sheets coming soon this was just a picture I took with my phone.

I like that the dyno's started at 2k rpm, it really tells us when these puppies start to build boost. Excited to see some final results.

I was excited to see this as well and could not believe how well the car spools up on the 67r housing as well as the bigger .86ARs

This just in from F.I

http://i50.tinypic.com/2elh4wy.jpg

http://i49.tinypic.com/bbqs.jpg

A little video I put together with some of the footage I have so far..

MT street radials have arrived for this Saturday! :driving:

http://i45.tinypic.com/mwqn8l.jpg

http://i46.tinypic.com/1zd407n.jpg

16's? what wheels are you going to use?

Awesome build man! I have the same boost controller and I love it!

Same as last time out its looking like.. the 16" TE37s that our good friend Sebastian at Specialty Z let us borrow. I still have the base brakes on the car for now which lets us fit 16s over the rear!

boost controller hooked up and functioning!

http://i47.tinypic.com/28jk12r.jpg

Why such a small tire on such a high horsepower car???