Nissan 370Z Forum
Page 24 of 238 « First 142223 24 25263474124 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Member's 370Z Gallery (http://www.the370z.com/members-370z-gallery/)
-   -   GaleForce's build (http://www.the370z.com/members-370z-gallery/63084-galeforces-build.html)

happytheman 01-23-2013 09:49 PM
Quote:
Originally Posted by GaleForce (Post 2127258)
I did it just like the DIY (adding a T fitting) but placed the stock sending unit on the side of the T fitting and the Defi sending unit on the end. That way I didn't have to move the factory wiring like mentioned in the Turbo installation manual.

I can try to get a picture tomorrow. I'm not sure how much can be seen now with the rest of the oil lines in place.
I have no idea what you just said, but I think it's good? :tup:

GaleForce 01-23-2013 09:51 PM
Quote:
Originally Posted by happytheman (Post 2127324)
Can that be done after the fact? :ugh2:
You could, but it would be better if you remove the covers to make the cuts.

GaleForce 01-23-2013 09:51 PM
Quote:
Originally Posted by happytheman (Post 2127328)
I have no idea what you just said, but I think it's good? :tup:
:icon18: :tup:

cavemancan 01-23-2013 09:55 PM
Quote:
Originally Posted by GaleForce (Post 2124164)
Gross, you just ruined Florida for me. :icon17:
:icon18: Don't wus out on me now I still need to see this car dang it!! I promise I'll bring a pair of steel toed boots to take care of the palmetto bugs! :roflpuke2:

So it's not completely off topic...BAD *** Build dude!















If it makes you feel better the last time I saw one I was 8 years old...That was 26 years ago. :tup:

happytheman 01-23-2013 10:19 PM
Quote:
Originally Posted by GaleForce (Post 2127332)
:icon18: :tup:
I thought you might like that comment in light of your very similar one to me. :tup:

happytheman 01-23-2013 10:20 PM
Quote:
Originally Posted by GaleForce (Post 2127330)
You could, but it would be better if you remove the covers to make the cuts.
Well all I gots to say is: ill be damned if I'm taking that lower nut off again. Those things were a pain in the left nut. :ugh2:

LMBmikeZ 01-25-2013 06:47 AM
Nice vid for the hood struts! :tup:

GaleForce 01-25-2013 11:33 AM
Quote:
Originally Posted by happytheman (Post 2127387)
Well all I gots to say is: ill be damned if I'm taking that lower nut off again. Those things were a pain in the left nut. :ugh2:
Do it the next time you jack the car up to take the wheels off. Easy peasy!

Quote:
Originally Posted by LMBmikeZ (Post 2129414)
Nice vid for the hood struts! :tup:
Thanks bud. :tup:

blackcherry20 01-25-2013 11:37 AM
Quote:
Originally Posted by GaleForce (Post 2129957)
Do it the next time you jack the car up to take the wheels off. Easy peasy!
:tup: you ALWAYS say that! :tup::icon17:

GaleForce 01-25-2013 11:47 AM
Quote:
Originally Posted by blackcherry20 (Post 2129978)
:tup: you ALWAYS say that! :tup::icon17:
Yeah, but that really is easy peasy :tup:

wheee! 01-25-2013 01:07 PM
This car better be ready Feb 18th... I'll be at the airport at 7am, waiting for a ride north to Borden! :stirthepot::p

Mr&Mrs 01-25-2013 01:08 PM
Sent you a PM

GaleForce 01-25-2013 01:42 PM
Quote:
Originally Posted by wheee! (Post 2130211)
This car better be ready Feb 18th... I'll be at the airport at 7am, waiting for a ride north to Borden! :stirthepot::p
Fly into Trenton, I'll pick you up there. :tup:


Quote:
Originally Posted by Mr&Mrs (Post 2130216)
Sent you a PM
Received. :tup: It's something to think about... It's a good chunk of motor building money... Need to talk to my accountant.

wheee! 01-25-2013 01:47 PM
Quote:
Originally Posted by GaleForce (Post 2130294)
Fly into Trenton, I'll pick you up there. :tup:
No, you need the drive to Pearson to get the grin off your face so I can drive it to Borden! :bowrofl:

Mr&Mrs 01-25-2013 04:24 PM
Is that code for wife? :tup:

Quote:
Originally Posted by GaleForce (Post 2130294)
Fly into Trenton, I'll pick you up there. :tup:




Received. :tup: It's something to think about... It's a good chunk of motor building money... Need to talk to my accountant.


All times are GMT -5. The time now is 11:36 AM.
Page 24 of 238 « First 142223 24 25263474124 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2