Nissan 370Z Forum
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Member's 370Z Gallery (http://www.the370z.com/members-370z-gallery/)
-   -   Rev Works BUILT Twin Turbo 370Z (http://www.the370z.com/members-370z-gallery/62957-rev-works-built-twin-turbo-370z.html)

Marti 11-09-2012 01:12 PM
Quote:
Originally Posted by Zuppy51 (Post 2008074)
Did any of the internals of this motor get modified?

Is the compression still stock?
motor is 100% untouched, sir.

Quote:
Originally Posted by Mr.Squeeze (Post 2008141)
What kind of dyno and what stage GTM turbo kit ?

I think i would make 750whp on that dyno
They have a land and sea dyno. I left there months ago but before i left, the builds that were done were backed up at a competitors dynojet so i can't imagine it's far off.

Quote:
Originally Posted by O&G (Post 2008153)
S&R's Dyno is seriously one of the highest reading dynos in the land. I forgot what kind it is, I know its not a Mustang or Dyno Jet. Their top mount single turbo numbers were LOL a year or so ago. Regardless, it's still a stout build!
The 370z single turbo also went to a competitor to dyno and the numbers were pretty damn close. It does read a bit different but it's withing low single digit % points.

Mr&Mrs 11-10-2012 11:31 AM
I know Brad! This is awesome he has been waiting to put this kit in for months!!! (Not waiting for Marti, but funds for install) If I remember correctly he said this is a Stage II kit, I belive off of Billys car when he parted it out.

W.O.W. 370Z 11-10-2012 11:41 AM
Quote:
Originally Posted by Mr&Mrs (Post 2009369)
I know Brad! This is awesome he has been waiting to put this kit in for months!!! (Not waiting for Marti, but funds for install) If I remember correctly he said this is a Stage II kit, I belive off of Billys car when he parted it out.
I bought billys kit:eek:

Sent from my SPH-D710 using Tapatalk 2

Mr&Mrs 11-10-2012 01:16 PM
Ok then it was from a different part out. Dont remember whos lol I said "if" I remember correctly....

Mr&Mrs 11-10-2012 01:34 PM
Ok I just text him the guy he got his kit from was not on the forum. He did buy it from jnaut though which is why I was thinking about Billy. Anyway cant wait to meet up and see the beast!

Isamu 11-10-2012 03:35 PM
Quote:
Originally Posted by O&G (Post 2008153)
S&R's Dyno is seriously one of the highest reading dynos in the land. I forgot what kind it is, I know its not a Mustang or Dyno Jet. Regardless, it's still a stout build!
it reads high, but not THAT high.. when I went from S&R to Z1 it was only 11whp high

Mr.Squeeze 11-10-2012 05:59 PM
Quote:
Originally Posted by Isamu (Post 2009539)
it reads high, but not THAT high.. when I went from S&R to Z1 it was only 11whp high


What was your numbers ? Did you make 550whp on just 7 pounds of boost ?

Nut_N_Much 11-10-2012 06:27 PM
Nice
 
Congrats on getting the kit on... It looks :happydance: awesome, nice and clean. A good tuner in
Tampa is Martin a Z Fever. He did 15 pulls to get KellyFields tune fixed. It would be interesting to see what they would show after S&R or Vortex "O" I'm sorry VSR's tune is.

Isamu 11-10-2012 06:54 PM
Quote:
Originally Posted by Mr.Squeeze (Post 2009685)
What wad your numbers ? Did you make 550whp on just 7 pounds of boost ?
I made 550 on 10psi with stock NISMO exhaust

G35_FTMFW 11-14-2012 02:18 AM
Fixed numbers?

How easy is it to edit those numbers on a dyno sheet?

Isamu 11-14-2012 10:38 AM
Quote:
Originally Posted by G35_FTMFW (Post 2015308)
Fixed numbers?

How easy is it to edit those numbers on a dyno sheet?
I made about 11 less on the Z1 dyno...

Marti 11-14-2012 03:52 PM
Quote:
Originally Posted by G35_FTMFW (Post 2015308)
Fixed numbers?

How easy is it to edit those numbers on a dyno sheet?
it's not, nor do we have any interest in doing that. We build cars. We're showing an example of our craftsmanship and attention to detail. The end numbers are a result of the tune and they were done by a 3rd party, not us.

Marti 03-14-2013 01:49 PM
Lets build another one, guys! Who is ready for some boost?

Marti 03-21-2013 09:19 AM
HAPPY THURSDAY, EVERYONE! Please let me know how we can help you!

Isamu 03-21-2013 09:36 AM
Quote:
Originally Posted by Marti (Post 2225046)
HAPPY THURSDAY, EVERYONE! Please let me know how we can help you!
:hello: Marti!


All times are GMT -5. The time now is 10:00 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2