Nissan 370Z Forum
Page 4 of 7 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Member's 370Z Gallery (http://www.the370z.com/members-370z-gallery/)
-   -   MY car so far (http://www.the370z.com/members-370z-gallery/53638-my-car-so-far.html)

Bigviet23 01-13-2013 10:46 PM
Quote:
Originally Posted by KevinN (Post 2109886)
where did you get that black grommet for your shift knob
The grommet is from my old nismo shift knob

Bigviet23 01-13-2013 10:47 PM
Quote:
Originally Posted by nmjaxx9 (Post 2109924)
dam I thought 30 in the back would have more of a poke. :icon17:
Normally they would but the offsets on these are +35

nmjaxx9 01-13-2013 10:56 PM
Quote:
Originally Posted by Bigviet23 (Post 2109934)
Normally they would but the offsets on these are +35
ahh ic :tiphat:

black-370z 01-14-2013 09:07 AM
Did you use the oven when you did your lights or a heat gun?
And sweet looking car! :tup:

Bigviet23 01-14-2013 09:28 AM
Quote:
Originally Posted by black-370z (Post 2110197)
Did you use the oven when you did your lights or a heat gun?
And sweet looking car! :tup:
I baked them in the oven. Worked out really well.
Thanks

UnReal 01-19-2013 08:51 PM
Quote:
Originally Posted by tibal (Post 1680560)
Looking great! Definitely looks professionally done, especially the rear!
Have to agree! Where did you get that? :tiphat:

Bigviet23 01-19-2013 09:54 PM
Quote:
Originally Posted by UnReal (Post 2120415)
Have to agree! Where did you get that? :tiphat:
My buddy did it for me and thanks

LiquidCrewZ 01-21-2013 10:38 AM
Quote:
Originally Posted by Bigviet23 (Post 1803737)
They're 20mm all the way around.
The post you had with the stock wheels I exactly the look I'm going for. But, did you need to buy longer lug bolts?

Bigviet23 01-21-2013 11:39 AM
Quote:
Originally Posted by LiquidCrewZ (Post 2122238)
The post you had with the stock wheels I exactly the look I'm going for. But, did you need to buy longer lug bolts?
I was using the spacers that had the bolts attached to them. They worked well. B2autodesign spacers are what I used and they work great

Bigviet23 01-21-2013 07:02 PM
1 Attachment(s)
Attachment 61508
Laid down some vinyl on my interior. Tried to do the metra kit too but it was too hard to get around all the circles.

Bigviet23 01-28-2013 05:17 PM
1 Attachment(s)
Fairlady Z badge
Attachment 61976

BRN370z 01-30-2013 06:34 AM
im about to install "TEIN S.Tech Springs" and they give 0.9 drop in the front.. and installing 20mm Ichiba V1 spacers, so do you think it will rub or i'll have any issues??

Bigviet23 01-30-2013 11:47 AM
Quote:
Originally Posted by BRN370z (Post 2138239)
im about to install "TEIN S.Tech Springs" and they give 0.9 drop in the front.. and installing 20mm Ichiba V1 spacers, so do you think it will rub or i'll have any issues??
Tien springs are notorius for dropping the car lower then what is said. I think people have gotten over an inch drop on them. But you should be fine on your set up unless your offsets are crazy low

AlexRaymond19 02-19-2013 11:32 AM
You should plasti dip your fengs! I think it would look mean! Good job so far

Pabroa2345 02-19-2013 02:25 PM
roof
 
nice looking roof! is that carbon fiber wrap and how much was it im located here in houston


All times are GMT -5. The time now is 07:54 PM.
Page 4 of 7 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2