thanks scruffy, The blue stands out everywhere i go.

Spacers and wash
 

Attachment 61051
30mm in the rear
275/40-18 in the back
255/45 up front.

where did you get that black grommet for your shift knob

dam I thought 30 in the back would have more of a poke. :icon17:

The grommet is from my old nismo shift knob

Normally they would but the offsets on these are +35

ahh ic :tiphat:

Did you use the oven when you did your lights or a heat gun?
And sweet looking car! :tup:

I baked them in the oven. Worked out really well.
Thanks

Have to agree! Where did you get that? :tiphat:

My buddy did it for me and thanks

The post you had with the stock wheels I exactly the look I'm going for. But, did you need to buy longer lug bolts?

I was using the spacers that had the bolts attached to them. They worked well. B2autodesign spacers are what I used and they work great

Attachment 61508
Laid down some vinyl on my interior. Tried to do the metra kit too but it was too hard to get around all the circles.

Fairlady Z badge
Attachment 61976

im about to install "TEIN S.Tech Springs" and they give 0.9 drop in the front.. and installing 20mm Ichiba V1 spacers, so do you think it will rub or i'll have any issues??

Tien springs are notorius for dropping the car lower then what is said. I think people have gotten over an inch drop on them. But you should be fine on your set up unless your offsets are crazy low

You should plasti dip your fengs! I think it would look mean! Good job so far

roof
 

nice looking roof! is that carbon fiber wrap and how much was it im located here in houston

i was considering it but i decided against it. I think it looks good at first but then gets a little faded after awhile. Maybe i'll get it painted or try to paint it myself if i can ever get the nerve to do that.

thanks, it is CF wrap. My buddy did it for me for like 80 bucks. i decided to take it off recently and i'm thinking about going with the black glossy vinyl that bluebatmobile offers

If you're in SoCal talk to flawlessz...he's got the goods. Very sweet car...and blues are definitely the best!Attachment 63496

Nice build, you have been busy.. Its looking really good +1 for the build. :happydance:

Stillen splitter
 

Attachment 63709
Gotta a great deal on this splitter from courtesy Nissan. More pics to come

Almost forgot these SOB's that has taken me way to long to finish
Attachment 63710

What about doing a vinyl wrap on your fangs?

Wrapping those are way too difficult for an amateur like me. Tried it once and didn't workout too well.

Where did u get the Vinyl? it looks awesome.

The vinyl is from mcguires I think. It's ok

Lights are done
 

Attachment 63773
Done!! Job well done. Minus the "well". It has its flaws but I'm overall satisfied with them

Its hard to get those suckers perfect. I did mine, and since i did it myself i know every flaw on them. But to someone who doesn't know the flaws to begin with its very hard to notice. My biggest :mad: is some dust i left behind inside it light. Drives me nuts.

As far as the fangs, ill get off your nuts about them lol. But if you really wanted to check it out again, i know blueb@t overlays sells custom cut overlays for for the fangs. They are cut to the perfect size so it makes it easier to get it on perfect and not have to deal with cutting and excess material getting in the way.

I bet if I got another set to do I could do them almost perfect. Should have done someone else's car first for practice.

Ill think about the vinyl wrapping the fangs when I get the roof re-wrapped.

Where did you buy the Halo's at? Nice job btw

Lookin good!! :tiphat:

Do you mind posting full shots of your car with halos? I want to see that

Got them from retrofitsource.com

Thanks man. Trying my best to keep her looking good while staying on a budget

Don't have any full shots yet. It's been raining here and there. Ill take some pics after I get her washed

So is your rear valance painted or is it an overlay? It almost looks carbon fiber. Looks good whatever it is.