|
Jealous, looks good!
|
The car's looking good Aamir. And i knew you would def add some cf! Lol
|
reminds me of eleanor from gone in 60 secs but its a z..... :tup: pure sex
|
Quote:
Quote:
|
Quote:
|
they should take you to act in Wangan Midnight the Japanese series!
|
This is going to be one nice build
|
Thanks guys, of things has been done, all fitting of parts, wiring on the way now
|
Wow. This is looking amazing. Sub'd!
|
That Aventador grey with the c.f. bits 'n pieces. Soooo nice!
Awesome taste ...... as usual. |
the paint is fantastic, and you are putting a lot of heart and smart choices into the build. Good for you, Subscribed.
|
Quote:
Quote:
Quote:
|
Lots of work in progress and then problem coming as well :o
Fitting of stock parts, fitted windscreen, lights, few weatherstrip and all locks http://img526.imageshack.us/img526/1...2021600640.jpg Took the car for basic wiring run, lights are ON :) http://img441.imageshack.us/img441/9...2022000652.jpg After wiring done taking the car for engine start, IC and brakes and fuel lines etc http://img196.imageshack.us/img196/7...2022100655.jpg http://img208.imageshack.us/img208/4...2022100656.jpg As the front brakes are from Toyota with vented rotors, but there is a problem coming, cant fit both the pads, looks like need to shim them a bit, TC and camber arms are installed http://img534.imageshack.us/img534/6...2022800666.jpg http://img713.imageshack.us/img713/3...2022800667.jpg http://img31.imageshack.us/img31/235...2022800669.jpg Test fitted the wheels as well, as sold my previous wheels, problem there again. Wheels are not clearing rear suspension parts, even coilovers are close as well. http://img444.imageshack.us/img444/4...2022800671.jpg http://img3.imageshack.us/img3/9941/...2022800672.jpg http://img404.imageshack.us/img404/7...2022800673.jpg I think bumpsteer has pushed things a bit down http://img36.imageshack.us/img36/990...2022800675.jpg http://img857.imageshack.us/img857/2...2022800676.jpg Even the wheel hub seems to be interfering, but one thing for sure wheels are drooling http://img20.imageshack.us/img20/328...2022800677.jpg http://img215.imageshack.us/img215/9...2022800678.jpg Will check again tomorrow after installing the tires. Most probably need spacers but still trying to find solutions and size recommendation as hub is different here compared to normal cars |
Quote:
|
Got my tires from US :)
http://img198.imageshack.us/img198/8...2022900698.jpg Bridgestone RE11, proven to give very nice grip over other tires. I had very limited options when buying tires either these, Yokohama Sdrive or Toyo R1R/R888 so went with these. Size went for 195 50 15 for the front 8.5" wheel http://img337.imageshack.us/img337/4...2022900699.jpg and 205 50 15 for rear 9.5" wheel http://img850.imageshack.us/img850/3...2022900700.jpg Just managed to install the front ones yesterday http://img543.imageshack.us/img543/7...2022900701.jpg Stretch is there but not that much was expecting more http://img192.imageshack.us/img192/2...2022900702.jpg http://img821.imageshack.us/img821/4...2022900703.jpg |
Quote:
|
Doc, it looks truly amazing thus far! :bravo:
|
Had some issues going on with the mechanic and project stopped for a while. I pushed him to just start the car and then will take the car somewhere else to do fuel lines and cleanup the mess he made with wires inside engine bay
http://img256.imageshack.us/img256/4...2031200738.jpg whole wiring is done and will start the car tonight I custom ordered full set of gauges which mechanic was supposed to hook up now but again like other things will get it done from somewhere else. It took around 8 weeks to get these done from Autometer, these are Ultralite II series, same like Ultralite but these are LED version, in the morning its sliverish white face and in the night all black with white LED lettering and red pointer. I got Speedo, Tachmeter in 5 inch size (stock is around 4inch) and then three big meters Oil pressure, Oil temp and Water Temp and last three smaller to go in place of audio head unit voltmeter, wideband A/F Ratio and Fuel level. http://img39.imageshack.us/img39/470...2022800682.jpg http://img715.imageshack.us/img715/5...2022800685.jpg Lightning is something like this and I loved it, took these pics off google from some Chevy Built http://www.lateral-g.net/g69/interior/dash03.jpg http://www.lateral-g.net/g69/interior/ill_test01.jpg Same setup comparison http://www.lateral-g.net/g69/interio...light_day2.jpg Night http://www.lateral-g.net/g69/interio...light_nite.jpg Close up Light closed http://www.lateral-g.net/g69/interior/AMtest1.jpg Daylight with lights open http://www.lateral-g.net/g69/interior/AMtest2.jpg Light on in dark http://www.lateral-g.net/g69/interior/AMtest3.jpg For Boost there is no meter will just use HKS EVO Boost controller for both reading and adjustments http://img18.imageshack.us/img18/838...2022800694.jpg |
sex... pure sex.. i love the wheels doc :D
|
never fail to impress! :tup:
|
Its going to look sick!!!!
|
Finally all mechanical part is done. Very disappointed with the whole experience with the mechanic but what's done is done so time to move on.
Final thing was to lay down the fuel lines, got steel braided lines, Walboro external fuel pump 255LPH and Aeromotvie 6 Injected bypass regulator along with the gauge. The lines are not aid nicely but will get some clamps done later on, along with the changing the brake lines. Couldn't take proper pics so just some crappy phone pics. http://img856.imageshack.us/img856/5...2032500765.jpg http://img694.imageshack.us/img694/7...2032700782.jpghttp://img252.imageshack.us/img252/4...2032700773.jpg http://img221.imageshack.us/img221/1...032700774e.jpg Will run the pipes along the chassis rails. such a mess with all the wires and pipes and the radiator hose needed to be changed as well. http://img593.imageshack.us/img593/5...2032700775.jpg Will get the lines clamped to the floor rail on the right, not sure how safe it will be but don't want fuel lines inside the car http://img690.imageshack.us/img690/3...2032700779.jpg fuel pump on the opposite side of the exhaust http://img29.imageshack.us/img29/687...2032700780.jpg http://img338.imageshack.us/img338/2...2032700776.jpg Got these fitting machine pressed http://img99.imageshack.us/img99/305...2032700778.jpg Installed wilwood 1" brake cylinder works fine. http://img152.imageshack.us/img152/5...2032700781.jpg There is some problem in handbrake cable, cant fit the stock ones in maxima callipers :( http://img651.imageshack.us/img651/4...2032700777.jpg I will sending the car for rest of electrical work might be some clean up and AC installation as well. |
such an awesome car! I am very excited for you Doc!
|
Been busy lately with lots of work and family commitments, but seems like project is back on track
Sent the car to Peak Performance Garage in Dubai few weeks back and finally they started working on it. I always loved their work, they did all the work on my 370z as well. Work being done now and will be completed in next week or so: Intercooler piping, will do weld joints once its finalized Already changed the Radiator to another one ordered from CXRacing, its for 240z with an RB engine along with twin fan shround from flex-A-lite Moving the Intercooler a bit to the front Moving and flipping the oil cooler behind intercooler, as it was touching some body parts Changing all hoses to new silicone hoses Rerun the clutch lines Rerun the brake lines to give a more neater look Rerun the fuel lines from inside the car Relocated the fuel pump inside the car Changing differential mounts Installing MSA front and rear sway bars Installing/replacing all gauges with autometer ones Installing HKS boost controller Rest will update as it goes Removed the stock fuel filter and cleaned up lots of things. http://i826.photobucket.com/albums/z...z/5689f9aa.jpg http://i826.photobucket.com/albums/z...z/5e899be4.jpg Can see the stock fuel line, piping will change now http://i826.photobucket.com/albums/z...z/70990b33.jpg Relocating the air filter near master cylinder http://i826.photobucket.com/albums/z...z/4e9515cb.jpg New Radiator, now hoses will run like stock RB engine bay, and better cooling, installed the flex-A-Lite twin fans along with shroud as before http://i826.photobucket.com/albums/z...z/a4c77a04.jpg Moved the intercooler http://i826.photobucket.com/albums/z...z/791c70d7.jpg Moved the oilcooler behind the IC now http://i826.photobucket.com/albums/z...z/29d40430.jpg http://i826.photobucket.com/albums/z...z/994191aa.jpg |
Loving this project Doc....
|
This is such a sweet build
|
This build is awesome. Sub'd
|
new pics are awesome!
|
Quote:
Quote:
Quote:
Quote:
Loving the work being done on the car, didn't visit them for a week but as per owner of Peak Performance here in Dubai car is almost done and will be ready from his side by this week. I took some pictures week back when they fitted the sway bars. I went with MSA sway bars both front and rear, usually people dont run rear sways on 240Z, but as I worked so much on the suspension so went with these as well. Not sure how the ride will be with coil overs, full front and rear suspension changed and all solid mounts for engine, differential. Front Sway Bar http://i826.photobucket.com/albums/z...z/ab0ab100.jpg New holes drilled http://i826.photobucket.com/albums/z...z/9edfea0c.jpg http://i826.photobucket.com/albums/z...z/a92d11e3.jpg Fits nicely with Techo Toy Tuning TC Rods and Camber arms. http://i826.photobucket.com/albums/z...z/a7193d63.jpg Rear ones http://i826.photobucket.com/albums/z...z/0e2b6775.jpg Drilled in the body and bolted from inside the cabin http://i826.photobucket.com/albums/z...z/2d2514e2.jpg http://i826.photobucket.com/albums/z...z/29dd6966.jpg http://i826.photobucket.com/albums/z...z/9fcac7ce.jpg Oil cooler brackets are finalized http://i826.photobucket.com/albums/z...z/7d9843d4.jpg Will fit the wheels today so can do the final adjustments on the camber/caster and if the track needs to be widened or not |
:excited:
|
Ok fitted the wheels and seems like problem of tire rod end hitting the wheels barrel is gone after tweaking the camber arms and TC rods or maybe because of installation of sway bars
WORK CR01 15 X 8.5 and 9.5 with Bridgestone RE11 195 50 15 and 205 50 15 Coilovers are set of high level will lower at time of alignment http://i826.photobucket.com/albums/z...z/be5cd33d.jpg This is the dropped height as of now http://i826.photobucket.com/albums/z...z/a7fb44c2.jpg Very relieved on the front ones http://i826.photobucket.com/albums/z...z/d48177d5.jpg Perfect offsets either to run on slightly negative camber or with fender flares http://i826.photobucket.com/albums/z...z/28fe748e.jpg http://i826.photobucket.com/albums/z...z/4b202e05.jpg Center cap is not fitting in the front might need some alteration http://i826.photobucket.com/albums/z...z/d6456eec.jpg Installed with Kics Neo Chrome long open lugs . I like how the rotors are peeking though the wheels http://i826.photobucket.com/albums/z...z/e042a625.jpg |
Wow man! Awesome build!
|
Quote:
forgot to write stock fuel rails are :icon14: So ordered fuel rails for slightly bigger injectors and got excited so order GReddy intake manifold along with universal 80mm throttle body. So no more IC pipes taking turns inside the engine bay Only thing would be some custom work needed to fit the manifold on a NEO engine |
:ugh2:
|
Being a huge fan of Chip Foose have watched Overhalling again and again lol, so wanted to do 10% of what he does to the cars.
Was waiting till the main work is done to start of heat and sound insulation, only thing came to my mind was Dynamat products. SWISS AUDIO FTW, They did an awesome work on my 370Z and now this they are working now on installation First they are doing a Dynamat Extreme, which will be stuck on the firewall, full floor, trunk, rear side fenders, doors and even the roof, main purpose was to reduce road noise, engine sound/vibrations and heat from the exhaust. Dynamat XTREME I love the way Swiss Audio guys work, they removed everything from the car even the brake and accelerator to cover the whole area. I took some phone pics yesterday while they were doing, rest might take today http://i826.photobucket.com/albums/z...z/659e858d.jpg http://i826.photobucket.com/albums/z...z/19cc3f71.jpg http://i826.photobucket.com/albums/z...z/b80bc3b0.jpg Once its finished it will be covered with DynaPad, which will hopefully eliminate all heat and acoustic issues at all. DynaPad, |
Dynamat thing is done, still I need the doors to be done but that will be after I change the window channel and most probably will be at the time of audio install.
Dynapad was a smaller piece so just in main three places. http://i826.photobucket.com/albums/z...z/1fa227eb.jpg http://i826.photobucket.com/albums/z...z/937b636c.jpg Some installed phone pictures was more worried about the the holes next to the fuel cell now all covered up http://i826.photobucket.com/albums/z...z/22c15623.jpg Other areas http://i826.photobucket.com/albums/z...z/69b13926.jpg http://i826.photobucket.com/albums/z...z/583ccae5.jpg Firewall area most important http://i826.photobucket.com/albums/z...z/dbe6c240.jpg Rest all finished http://i826.photobucket.com/albums/z...z/3551d0f4.jpg http://i826.photobucket.com/albums/z...z/a299b1ae.jpg http://i826.photobucket.com/albums/z...z/42a22a98.jpg http://i826.photobucket.com/albums/z...z/6a0fd582.jpg http://i826.photobucket.com/albums/z...z/866449a0.jpg http://i826.photobucket.com/albums/z...z/b2fcae01.jpg Car is off the jack so took some pictures http://i826.photobucket.com/albums/z...z/c25150c5.jpg http://i826.photobucket.com/albums/z...z/d7738871.jpg Waiting for intake manifold, fuel rails and 80mm throttle body to finish off the work, parts will be here by Sunday :) Meanwhile doing some DIY to fit the Autometer guages, Im using the stock guage housing and installing the meters in that, sizes are bit different so gaps will be filled by Bondo and a respray on the whole dash http://i826.photobucket.com/albums/z...z/db09e230.jpg http://i826.photobucket.com/albums/z...z/c355c967.jpg |
Looking good. How much weight did all of that dynamat add to the car?
|
Quote:
Good question, i was thinking the samething. |
With as light as the S30 is to begin with and the power potential of the RB26...that little bit of extra weight added by the Dynamat might just help him out.
|
| All times are GMT -5. The time now is 04:30 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2