Well I went to Z1 Motorsports here in Ga and had them re tune my car from scratch it took John 4hrs. total to finish it up but before he started I had a 10lb pulley and it only made 445rwhp then I took it off and put on a 11 lb pulley on made 449 first pull(this was a few weeks ago)John at that time only got it to 451rwhp so he told me to come back when he has more time to spend with it well 4hrs seem to be enough time b/c here is what he got.

http://www.the370z.com/members/baer3...dyno-sheet.jpg

Nice!

I just picked up a Snow Performance water/meth injection kit,this kit is very easy to install but trying to figure out where everything is going is quite a challenge,I'm about finished with it will post pics later as I get closer to being finished.:tup:

Pics later:icon23:

I have to go buy a tap for the intake tubes:ugh2:

What methonal injector sizes have you selected?

Whatever fits in his butt. Them hemorrhoids can get hot. :bowrofl:

175ml @60psi pump pressure but the tech at snow said my kit comes with a 220psi pump so these should flow about 200-225ml he said that's a good place to start from.

1 in each intake pipe 1-1.5 in after MAF

I wonder what they would say about meth kit on a NA car. I don't see how it would hurt

Did a quick search. Many variables when NA come onto play. Better for high compression motors where timing comes into play.

I have a Aquamist system and will be installing a 0.4 pre-MAF and 0.7 after MAF in the intake pipes. Somewhat like GTM's system or at least having the same intent as GTM's. I won't be injecting methanol into the air cooler.

It will be interesting to see how our stage 1.5's compare after I'm done.

Here are some pics of whats going on with the install.

http://www.the370z.com/members/baer3...e-s-p-pump.jpg
http://www.the370z.com/members/baer3...under-foam.jpg
http://www.the370z.com/members/baer3...rictronics.jpg
http://www.the370z.com/members/baer3...es-holders.jpg
http://www.the370z.com/members/baer3...ook-bigger.jpg
http://www.the370z.com/members/baer3...-undecided.jpg
http://www.the370z.com/members/baer3...-injecting.jpg

Love the PW you have done an awesome job with your Z buddy. Great numbers too btw :tup: are you running test pipes?

Thanks :tiphat: no I have Stock cats.:tup:

Can't wait for you to test that baby out.

I'm gonna be hooked on Meth!!!!!!!!!!!!!!!!

:roflpuke2::roflpuke2::roflpuke2::roflpuke2:

Thought you already were.:icon23:

Meth head! You'll need to move to Vancouver next!
;)

:roflpuke2:

I know I've got to stop messing with my car.

Here are some pics of the finished product.
http://www.the370z.com/members/baer3...allon-tank.jpg
http://www.the370z.com/members/baer3...allon-tank.jpg
http://www.the370z.com/members/baer3...2-finished.jpg
http://www.the370z.com/members/baer3...ide-nozzle.jpg
http://www.the370z.com/members/baer3...ide-nozzle.jpg

You should of sneaked your way up here today. What a blast.

Have to edit,people have to make jokes on my personal thread.

That's what I say when my girl hits me too.

That's what you get when you let guys sit on your face. Lol jk

Thanks for making a joke on my thread when I can't see,drive,or work and may lose my vision.:shakes head:

Friggin part timers:rolleyes:

Looks great!

Thanks :tiphat: the kit was easy to install,it took awhile when I decided to make a box for the tank.:shakes head:

Have you tested it yet?

Yeah it works good:tup:

I had John @ Z1 tune it for water/meth and he was able to give me 2 maps 1 for Meth and 1 for 93 octane gas plus was able to lower my fan settings with Osiris.

Was there any sort of mild power gains? Repped

Yeah 464rwhp back to back pulls in 92 deg weather:tup:

When John tuned just the car it was 10-15 deg cooler he said it makes more power now despite showing 464rwhp,it should be fun in the fall.:icon17:

Your Car is sick good job on it :tup:

Thanks:tiphat:

Car is all done I'm just trying to dial in some tuning,suspension details.

After driving my car around the meth was uncovering the pickup causing a bog so I put my thinking cap on and came up with a unique fix,I used 150 plastic golf wiffle balls to slow down the movement,the tank lost .5 of a gallon but 2 gallons is enough for me.

http://www.the370z.com/members/baer3...ng-pick-up.jpg
http://www.the370z.com/members/baer3...-mountains.jpg
http://www.the370z.com/members/baer3...dy-install.jpg

Intersting fix. Don't think I would of thought of using wiffle balls.

It was either that or buy a fuel cell,and I really like the look of my set up especially since I put red led's under the tank so when you open the hatch it glows the tank red.:tup: