TravisJB Journal

travisjb · 08-28-2009, 09:56 PM

Quote:

Originally Posted by alan93rsa

Travis,

Hopefully finding your short will be a short venture.

Glad to see someone else using the Spa dual gauges. I plan to replace my $900 stopwatch on the dash with an oil temp/oil pressure gauge. Looks to be an easy fit.

The Alcons, BTW, look great on the car and in the data log.

Hey Alan, good to hear from you

Spa gauges are big with the porsche crowd... reputation for accuracy and precision... not yet installed, but soon

Re brakes, thanks... could have gone brembo but these ap racing brakes seem like the best deal for a serious track car... I think they will come alive and really be put to the test once I get some stickies !

JesyJibre · 08-30-2009, 05:54 AM

Questions and answers about 1973 oldsmobile 442 and Intrigue oldsmobile recall.

Ken in AZ · 08-31-2009, 01:25 PM

Quote:

Originally Posted by travisjb

Hey Ken... could be as simple as a code that got registered when I had to reset the airbag light... that procedure sometimes disables the chime, which could in turn create the u0160 code... or it could be as i said before that there is a short or disconnect somewhere that is blowing the meter fuse and threw this code... whatever the case, hoping the dealer can help us resolve the mystery limp mode issue too... prob a long shot, but we're going to give it a shot...

if we draw blanks on this, going to go forward with tuning and upgrading the fuel system... then see if the issue persists... as you and I have discussed, if the issue causing limp mode relates to the computer getting thrown off by my bolt on mods, tuning may set ecu parameters where they should be for the more free flowing intake/exhaust...

... oh well, all speculation for now

Now that I think about it the code that you'd get from the bolt on mods would be a lean code but it is possible for that code to be reset after a number of key cycles. If it happens again you'd need to pull the code immediately after it happend.

I just got the Cipher cable from UpRev that has the ability to pull codes but I'm not sure of the compatability with the 370z - but I do know that any OBD2 code reader would be able to pull any codes off any vehicle built after 1996.

travisjb · 09-04-2009, 10:11 PM

I've been working with Coulter Nissan on the diagnosis... good guys there!

They pulled MANY codes off the car, but all were related to disconnecting and reconnecting various wiring harnesses and none seem to relate to the throttle and engine cut-off issues.

We have a few theories, but the plan now is that I will bring their master tech with me to the track at PIR next weekend 9/12-13 for my next NASA event. We intend to hook up the dealer's computer while running and see if we can capture some freeze frame data to isolate any sensor variables that are out of range and isolate the timing of any codes that coincide with limp mode or engine cut-off.

More later.

Ken in AZ · 09-07-2009, 12:45 AM

Cool - Can't wait to hear the outcome and I wish I could come out to see what the nissan software looks like and how it operates. Good luck and keep us posted!

Zless@arizona · 09-07-2009, 09:01 PM

I spent the last several hours reading all 21 pages of your post (this is what I do on my Labor Day Holiday!). Your build history, parts, and comments, testing is awesome! You also have a great tech/fab at Redline! I'm anxiously waiting on your next post. I hope you get the engine shut-down issue fixed soon. It's cool that Nissan is sitting with you at the track downloading data real-time! It seems they have an interest in your endeavor.

510z · 09-07-2009, 09:03 PM

Quote:

Originally Posted by Zless@arizona

I spent the last several hours reading all 21 pages of your post (this is what I do on my Labor Day Holiday!). Your build history, parts, and comments, testing is awesome! You also have a great tech/fab at Redline! I'm anxiously waiting on your next post. I hope you get the engine shut-down issue fixed soon. It's cool that Nissan is sitting with you at the track downloading data real-time! It seems they have an interest in your endeavor.

Its Anthem, what else are you supposed to do?

Zless@arizona · 09-07-2009, 09:46 PM

Quote:

Originally Posted by 510z

Its Anthem, what else are you supposed to do?

Build my 370Z, go off-roading in my 4x4, see a movie, go out to dinner, etc ... preferably with a beautiful woman who wants to be with me for the next 30 years. One can dream...no? But I digress...This is Travis' thread about his race build.

travisjb · 09-08-2009, 12:50 AM

Thanks for jumping in... okay to ask questions and share your thoughts here... I'm not worried about thread-jacking!

More updates later this week

ChrisSlicks · 09-08-2009, 07:48 PM

I had a engine cut-out this weekend during auto-x. It was purely a fuel cut after taking a long sweeping right hand turn at 1.2G below 1/4 tank, except that the cut lasted an extraordinarily long time before it got going again. The programming on the engine computer seems to be a little slow to recover compared to previous engine revs.

Obviously you have more going on than that but just wanted to point out how sensitive these engines are.

travisjb · 09-08-2009, 11:36 PM

Chris, how can you be certain it was a fuel issue? thx

510z · 09-09-2009, 09:20 AM

one of these days i need to see that car. I mean ive been to your house and have seen what used to be in your car. when is it going to the track again?

ChrisSlicks · 09-09-2009, 05:25 PM

Quote:

Originally Posted by travisjb

Chris, how can you be certain it was a fuel issue? thx

Once of my fellow racers had a well equiped trailer with several 5 gallons gas cans. So I bought one off him and poured it in and the problem went away.

It's not a new problem, it used to happen in my G35 as well. But where the cut out in the G35 was momentary, in the 370 it seemed to last about 2 seconds or more. Luckily I had completed my winning run on the run just prior, it would have sucked to lose because of that.

travisjb · 09-11-2009, 05:42 PM

I'm going to try topping off before every run tomorrow and see if that fixes the problem

Unfortunately dealer backed out on joining me at the track...

Will update this weekend

travisjb · 09-12-2009, 09:10 PM

Problem identified !!!

I kept the car topped off all day today, refilling every other sessions... only 1 issue with loss of throttle! It happened when I was 5 bars away from full and pulling sustained 1g loads through right hand turn. I'm now 99.99% convinced that the issue is fuel related. I look forward to upgrading the fuel system!

Wondering if we should start another thread on the fuel starvation topic and spread the word?

Going to go to my 'Track Video Journal' and add a new video from my session today.

08-30-2009, 05:54 AM	#302 (permalink)
JesyJibre Base Member Join Date: Aug 2009 Location: Jamaica Posts: 1 Drives: JesyJibre Rep Power: 15	http://automoto.goodnano-av.com/ Questions and answers about 1973 oldsmobile 442 and Intrigue oldsmobile recall.

09-04-2009, 10:11 PM	#304 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	I've been working with Coulter Nissan on the diagnosis... good guys there! They pulled MANY codes off the car, but all were related to disconnecting and reconnecting various wiring harnesses and none seem to relate to the throttle and engine cut-off issues. We have a few theories, but the plan now is that I will bring their master tech with me to the track at PIR next weekend 9/12-13 for my next NASA event. We intend to hook up the dealer's computer while running and see if we can capture some freeze frame data to isolate any sensor variables that are out of range and isolate the timing of any codes that coincide with limp mode or engine cut-off. More later. __________________ 2009 370Z #104 For Sale

09-07-2009, 09:01 PM	#306 (permalink)
Zless@arizona Base Member Join Date: Sep 2009 Location: Tallahassee Florida Posts: 71 Drives: '01 Chvrlt Tahoe 4x3 Rep Power: 15	Incredible post, Travis! I spent the last several hours reading all 21 pages of your post (this is what I do on my Labor Day Holiday!). Your build history, parts, and comments, testing is awesome! You also have a great tech/fab at Redline! I'm anxiously waiting on your next post. I hope you get the engine shut-down issue fixed soon. It's cool that Nissan is sitting with you at the track downloading data real-time! It seems they have an interest in your endeavor.

09-08-2009, 12:50 AM	#309 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Thanks for jumping in... okay to ask questions and share your thoughts here... I'm not worried about thread-jacking! More updates later this week __________________ 2009 370Z #104 For Sale

09-08-2009, 11:36 PM	#311 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Chris, how can you be certain it was a fuel issue? thx __________________ 2009 370Z #104 For Sale

09-07-2009, 12:45 AM	#305 (permalink)
Ken in AZ Base Member Join Date: Jun 2009 Location: Maricopa AZ Posts: 35 Drives: M45 2006 Rep Power: 263	Cool - Can't wait to hear the outcome and I wish I could come out to see what the nissan software looks like and how it operates. Good luck and keep us posted!

09-08-2009, 07:48 PM	#310 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	I had a engine cut-out this weekend during auto-x. It was purely a fuel cut after taking a long sweeping right hand turn at 1.2G below 1/4 tank, except that the cut lasted an extraordinarily long time before it got going again. The programming on the engine computer seems to be a little slow to recover compared to previous engine revs. Obviously you have more going on than that but just wanted to point out how sensitive these engines are.

09-09-2009, 09:20 AM	#312 (permalink)
510z Enthusiast Member Join Date: Mar 2009 Location: Phoenix Posts: 328 Drives: 09 370z Blue M6 Rep Power: 16	one of these days i need to see that car. I mean ive been to your house and have seen what used to be in your car. when is it going to the track again?

09-11-2009, 05:42 PM	#314 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	I'm going to try topping off before every run tomorrow and see if that fixes the problem Unfortunately dealer backed out on joining me at the track... Will update this weekend __________________ 2009 370Z #104 For Sale

09-12-2009, 09:10 PM	#315 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Problem identified !!! I kept the car topped off all day today, refilling every other sessions... only 1 issue with loss of throttle! It happened when I was 5 bars away from full and pulling sustained 1g loads through right hand turn. I'm now 99.99% convinced that the issue is fuel related. I look forward to upgrading the fuel system! Wondering if we should start another thread on the fuel starvation topic and spread the word? Going to go to my 'Track Video Journal' and add a new video from my session today. __________________ 2009 370Z #104 For Sale

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 10:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-09-2013 11:55 PM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 05:44 PM