Wheeeeeeeeeeeee! :tup:

http://www.the370z.com/members/370z-...6-tease-me.jpg

Happy 4th!:usa:

https://sites.google.com/a/dslextrem...ran/ssr001.jpg

U enjoy teasing us don't you ?

I think he is a bit shy:rofl2:

Show us the wheels! Hahaha, can't wait to see them!

rolling with new plates...

https://sites.google.com/a/dslextrem.../newplate1.jpg


also, 4 of my halo LEDs from MRWorks failed yesterday after a year. Anybody hear from Mark or Ryan? Theyre no longer forum sponsors. :(

I no longer wish to see your wheels. ( reverse psychology )

No idea on the led failure tho

So my ART pipes I bought from ebay had to be replaced due to a crack weld. Tony@Motordyne mailed out the ART pipes V2 Friday and I received them today via FEDEX home delivery. Took the pipes to Amplified after work for the install. For the last 2 weeks I've been driving around with a nasty leak. Car drives like a champ again! :driving:

https://sites.google.com/a/dslextrem...tran/ARTV2.jpg

Specialty Z Uprev tune in 2 weeks! :happydance:

Good luck with your project :)

Update pics with wheels.

https://sites.google.com/a/dslextrem.../SSRFINAL9.jpghttps://sites.google.com/a/dslextrem...SSRFINAL10.jpghttps://sites.google.com/a/dslextrem...SSRFINAL11.jpghttps://sites.google.com/a/dslextrem...SSRFINAL12.jpghttps://sites.google.com/a/dslextrem...SSRFINAL13.jpghttps://sites.google.com/a/dslextrem...SSRFINAL14.jpghttps://sites.google.com/a/dslextrem...SSRFINAL15.jpg
https://sites.google.com/a/dslextrem.../SSRFINAL1.jpghttps://sites.google.com/a/dslextrem.../SSRFINAL2.jpghttps://sites.google.com/a/dslextrem.../SSRFINAL3.jpghttps://sites.google.com/a/dslextrem.../SSRFINAL4.jpghttps://sites.google.com/a/dslextrem.../SSRFINAL5.jpghttps://sites.google.com/a/dslextrem.../SSRFINAL6.jpghttps://sites.google.com/a/dslextrem.../SSRFINAL7.jpghttps://sites.google.com/a/dslextrem.../SSRFINAL8.jpg

Bravooo best PW have seen so far, your car looks different and sick wheels :tup:

What's next now

Damn man...car looks killer!! Welcome to the SSR family.

Wow, that is one of the most gorgeous PW Zs, if not all Zs, out there. So clean!

looks awesome!

Thanks for the + feedback fellas. :tiphat:

Uprev tune by Specialty Z in a couple weeks, then install the CS fenders.

After that, some brakes and suspension work to follow. :tup:

Seb is the man, you will be very happy. I went from 301whp and 243wtq untuned to 310whp and 259wtq, plus he is a really cool guy.

Wheels look awesome :tup: What are the sizes/offsets?

Been to SZ twice for dyno pulls already don't mind the drive at all. Do you think by getting heavier larger wheels will affect the dyno numbers?

thanks shaun66', the wheels are 20X9.5 +25 MD, 20X11 +11 SL. The rear has a 3mm spacer as well to clear the sport calipers.

Car has progressed nicely
what tire size are you running on the SSRs?

Thanks Boost. I wanted to run 255F,305R, but V12s doesnt come in 305. Had to settle for 255/30F,295/25. A little thin to my liking.

I saw a sneak peak on SSRs Facebook page. Nice! There's almost an identical picture of my wheel on their page, too... same angle, same finish, same lugs...just different sizes and face.

Car looks hot, good job!

So clean

Specialty Z UpRev tune scheduled for August 25th. Can't wait! :driving:

Also installed some black badges on the rear to complete the color scheme. Pics soon!

Evo r
 

Hi, I just bought some parts from EVO R, but I haven't heard from them.
Jay don't answer the phone and don't write me back... How long did you wait to receive it and how was it?!?!

Also were did you buy the MRWorks LED headlamps...
Thank you

That's not a surprise. Jay's lack of communication is pretty well known around this forum. My front lip and rear diffuser arrived to my house unexpectedly because I never received a tracking number or even a confirmation of shipment from him...but I wouldn't worry, I haven't heard of one complaint about not receiving their products.

Yea quality on the skirts and lip was spot on. Shipping only took a week to get to me once shipped. But it took a few weeks for the lip to be in stock though.

Lights I got from MRWorks, but they closed shop. :(

Two Words my friend Flawless, Flawless!

:worship::worship::worship:

some pics of gloss black rear emblems courtesy of daisuke.

Also Uprev tune at SZ on thursday, 25th.

https://sites.google.com/a/dslextrem...ewemblems1.JPG
https://sites.google.com/a/dslextrem...ewemblems2.JPG
https://sites.google.com/a/dslextrem...ewemblems3.JPG
https://sites.google.com/a/dslextrem...newemblem4.JPG
https://sites.google.com/a/dslextrem...newemblem5.JPG

It looks so good! Everything is ties together nicely.

This ride is sweet and for sure a sick Z34 love the wheels.

how much did u pay for ur side blade?

thanks

nice man. Ive always loved those evo-r side blades. I just need to find a way to grind down the hump in my driveway so i can get sometihng like that.

Nicely done! Great balance of CF vs white

Did you ever get the tune?

Yes I did. Only gained +4hp from the tune. Not sure how much of a factor the 100 degrees weather played in the low gains.

Top end power may not have changed, but you mid range and power curve I'm sure is smoother.

What are the specs on the wheels? What are ur camber setting? Car looks hoT!!

Edit: nevermind, just saw the 1st page :)

+4 is good though. It seems like most people that saw gains from the motordyne intake manifold don't gain much if anything when they get a tune. I haven't read all the reviews on it yet though so maybe I'm missing something.

Did that meaty mid-range power from the manifold stay the same after the tune? Thats where my car needs some help.

Just ordered NST pulley set. Hopefully install and before/after dyno pulls by the end of the month.