|
Hey TJ did you have to buy the diffuser for the bumper to properly install it? Its like $450 right? Or does the lower splash shield from a base line up? Also did you have to buy the fender liners to match the gap in the fender up? Thanks!
|
Quote:
|
How bout the fender liners? Any need?
|
Quote:
|
Here is a complete list of all parts needed minus the Nismo spoiler.
Front bumper parts: • Front bumper - FBM23-1A47H ($578.61) • Front bumper diffuser - F2026-1A47A ($346.01) • Fender liner Protectors - F20641A30A, F20641A30B, F20641A30C, F20641A30D ($97.24 EA) • (Two) Bracket-Front F20421A30A (62675) ($83.47 EA) • (six) Rivets U0RVT1A007 (62010R) ($4 EA) The rest of the parts you can use from your original bumper hardware. Optional: You can mod/hack your original ones to fit or get the real ones • F3845-1A30A (Front inner wheel well liner for one side) ($54.13) • F3844-1A30A (Other side) ($54.13) • G5892-1A30A (Under Engine Cover) ($964.91) Side skirts: • G6853-1A31H (Side skirt) ($281.58) • G6852-1A31H (other Side Skirt) ($281.58) • 76882-EG01A (Replacement clips for the side skirts - from experience on other vehicles, these break.) ($1.02 EA) Rear bumper parts: • Rear bumper - HEM23-1A47H ($820.42) • Rear Fender Liners (left and right fenders) - H5064-1A47A / H5065-1A47A Note: Nissan calls the fender liners "protectors." (EA $94.42) • H5249-1A30A (Bracket - this is used in the middle of the rear bumper. It is different than the stock bracket) ($94.93) • Six screws 01451-00841 ($1.14) The rest of the parts you can use from your original bumper hardware. |
|
Cool pics. Great work with the Nismo conversion and the Z emblems TJ.
|
Quote:
Keepin' us Monterey Blue folks looking good, TJ! :tup: |
looks great!
|
Thanks guys!
|
are you planning on getting the wing?
|
Hey Tj just wanted to say thanks for all your pics and answers man. You were a huge inspiration with my conversion.
|
Quote:
|
Quote:
|
TJ, it has really come together very nicely. Monterrey Blue looks amazing with the Nismo kit and wheels!
|
Quote:
|
Pick the 370z, the 300zx sucks up gas like a camel.
|
Finally got around to doing a video of my current exhaust. (FI TDX) Wow what a comparison!
old setup: (holy rasp batman!) new setup: Neighbors are happier. ;) |
Great videos man! This will surely help some folks decide =) REP
|
excellent mod journey, nice writeup.
|
how come I hear a suction or hiss on deceleration?
|
^ cuz thats what happens with HFC's and A CBE on the Z34. :)
|
Fall is here, enjoying some nice no rain days still.
Trying to decide my next mod. A wing... Hopefully will have it on by spring. http://farm7.static.flickr.com/6115/...d45be114_b.jpg http://farm7.static.flickr.com/6094/...a4905ece_b.jpg |
Recently changed out a bunch of interior bulbs to LED.
Did the Map lights Visor lights Trunk light Much improved and better lighting! On the Map lights I was deciding if I wanted to get the panel board or just get a single bulb. I decided to just get a bulb and see how bright it was--it was complely fine and IMHO no need for this multiple panel board. It's expensive too. Map light: WLED-xHP Specifications Visors: F30-WHP Fuse Type Lamp Specifications Trunk light: 6 High Power LED Rectangle Type Wedge Base Bulb Specifications |
Pulled the plug and bought a Nismo replica wing. Looks like a Seibon wing but it's FRP.
No center post just like the Seibon. It's called the Nismo 370Z Duraflex N-2. Spoiler cost me $268 shipped! I just cannot justify paying $2,500 for the real one, plus paint and install! Stopped by the body shop and I was quoted $600 for prep, paint and install. Good deal? |
Can't wait to see it mounted!
|
Hey cuz, were you wanting to wait til I got back for a test fit on my Z still? $600 seems a lil steep for prep paint and install, but I could be wrong. I might be interested in your sport wing too if you're selling it.. Lemme know
|
Hey TJ your Z looks amazing and can't wait to see the wing on also. I'm seriously interested in doing the same conversion of my car to the OEM Nismo bumpers, side skirts, and the wing. If you could can you tell me where you got your parts and how much for the install and paint and what else will be necessary if so. PM me if you don't want to post it. Love your Z. :) Thanks
|
Sck progress homie. Great job.
Chris |
Amazing car! One question though, why don't you go with Evo R's nismo high wing?
|
Quote:
|
1 Attachment(s)
I actually just had the Evo-R High Wing painted an installed a few weeks ago (pic attached). I'll try to get more pics posted in the coming days
|
Quote:
|
I am torn on the spoiler. I think I will not be installing the ED DuraFlex spoiler after all, as they want $600 to paint/install it and I am worried about the drilling/fitment. The wing is also missing the middle post, which I am finding I really do not like, so I am thinking of getting the EVOR Highwing or just doing the OEM one. It's actually a little cheaper than I had thought. $1,600 for the parts from Nissan Parts Zone.
http://www.nissanpartszone.com/compo...960-301_4.html http://www.nissanpartszone.com/diagr...mo-960a002.png |
I posted the rest of the pics I had in my album. More on the way
|
Yeah I like the high wing. I haven't heard much about your 370 lately, this will really top off the look! I think you could probably get it painted and mounted for a little cheaper, I would hunt around.
|
Love it!!
|
That looks awesome! I never understood why Nissan doesn't offer the Nismo in blue.
Good job. |
Looks awesome & great job on having everything put together. You would never know that it wasn't really a Nismo from only looking at the exterior. The car has all the exact parts. The only way is if you were to look inside in which you could tell. Very clean looking.
|
| All times are GMT -5. The time now is 07:53 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2