My 2019 Nismo

Quicksilvers · 12-01-2018, 02:08 PM

That is one beautiful and clean Nismo Z you have there take care of it. I really like the stance the KW V3 makes your Z stand out. Any plans for any other mods? Any more ideas for your suspension? As far as the (under shroud tray) I would do the Z Speed Performance aluminum engine splash shield and the Z Speed Performance CMAK would be on the top of my to do list. If you are doing a front sway bar I would go with the Hotchkis front sway bar over the Whiteline.

justin_boy · 12-01-2018, 02:39 PM

Quote:

Originally Posted by Quicksilvers

That is one beautiful and clean Nismo Z you have there take care of it. I really like the stance the KW V3 makes your Z stand out. Any plans for any other mods? Any more ideas for your suspension? As far as the (under shroud tray) I would do the Z Speed Performance aluminum engine splash shield and the Z Speed Performance CMAK would be on the top of my to do list. If you are doing a front sway bar I would go with the Hotchkis front sway bar over the Whiteline.

Hey, thank you for the kind words! As for suspension set up, The V3's are set to factory setting and I think I might stiffen the dampening a little but other than they ride like a dream.

I just ordered the z speed aluminum under shroud and am going to get that installed soon, but im going to hold off on the sway bar for now.

As for the CMAK, how hard is this to install and who would be able to install this? Ive been considering it.
did you get this done?

Quicksilvers · 12-02-2018, 08:48 PM

Quote:

Originally Posted by justin_boy

Hey, thank you for the kind words! As for suspension set up, The V3's are set to factory setting and I think I might stiffen the dampening a little but other than they ride like a dream.

I just ordered the z speed aluminum under shroud and am going to get that installed soon, but im going to hold off on the sway bar for now.

As for the CMAK, how hard is this to install and who would be able to install this? Ive been considering it.
did you get this done?

Install the Z Speed Performance CMAK before it’s too late and your CSC catastrophically fails. Depending on how quick and efficient you work the installation time is any where from 5-8 hours. When your Genuine Nissan OEM CSC fails it can and will leak all over your clutch and ruin your clutch friction material. Our clutch on our Z’s are expensive to replace. You have the slightly upgraded Exedy Performance clutch kit on your Nismo. If you can’t do the installation yourself then choose a reputable transmission or driveline shop you trust. If you go to a Nissan dealership service department you may get racked over the coals. Installing aftermarket sway bars mainly the front sway bar will make a nice difference in your Z.

justin_boy · 12-02-2018, 09:41 PM

Quote:

Originally Posted by Quicksilvers

Install the Z Speed Performance CMAK before it’s too late and your CSC catastrophically fails. Depending on how quick and efficient you work the installation time is any where from 5-8 hours. When your Genuine Nissan OEM CSC fails it can and will leak all over your clutch and ruin your clutch friction material. Our clutch on our Z’s are expensive to replace. You have the slightly upgraded Exedy Performance clutch kit on your Nismo. If you can’t do the installation yourself then choose a reputable transmission or driveline shop you trust. If you go to a Nissan dealership service department you may get racked over the coals. Installing aftermarket sway bars mainly the front sway bar will make a nice difference in your Z.

I am definitely going to look into that, thank you for all that info. I just need to find a good shop near me I’m in so cal

Quicksilvers · 12-03-2018, 02:30 AM

Quote:

Originally Posted by justin_boy

I am definitely going to look into that, thank you for all that info. I just need to find a good shop near me I’m in so cal

I do know of one reputable shop close to you that is knowledgeable of Nissan and Infiniti vehicles. Check out Japanese Auto Center in Canoga Park,CA they did a excellent job on my buddies clutch and flywheel installation on his 350Z you may want to check them out they know their stuff when it comes to Nissan.

justin_boy · 12-03-2018, 09:28 AM

Quote:

Originally Posted by Quicksilvers

I do know of one reputable shop close to you that is knowledgeable of Nissan and Infiniti vehicles. Check out Japanese Auto Center in Canoga Park,CA they did a excellent job on my buddies clutch and flywheel installation on his 350Z you may want to check them out they know their stuff when it comes to Nissan.

Thank you so much! I truly appreciate it. Ill check them out

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2019 nismo cabin filters	mishuko	Nismo 370Z	5	02-01-2019 08:29 AM
2019 Nismo review	mishuko	Nissan 370Z General Discussions	8	09-08-2018 10:13 AM
2019 nismo owner	mishuko	New Nismo 370Z Owner	2	09-08-2018 07:39 AM
2019 bmw z4.	UNKNOWN_370	Other Vehicles	5	08-24-2018 09:15 PM

12-01-2018, 02:08 PM	#1 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,038 Drives: 2017 370z Rep Power: 25465	That is one beautiful and clean Nismo Z you have there take care of it. I really like the stance the KW V3 makes your Z stand out. Any plans for any other mods? Any more ideas for your suspension? As far as the (under shroud tray) I would do the Z Speed Performance aluminum engine splash shield and the Z Speed Performance CMAK would be on the top of my to do list. If you are doing a front sway bar I would go with the Hotchkis front sway bar over the Whiteline.