That’s exactly what I’m running. Works great. If it’s something already on the car you’ll need to cut the threading to open it up and then wrap/zip tie it in place. When using it for the pneumatic lines you can just run it thru before you route it and attach it.

Some spl bushings were found on the porch :tup:
https://i.imgur.com/xan6pbHl.jpg

You going to let EW install those? He knows how. :tup:

nah, gonna let Mr Hammond show me whats up. :tup:

Sadly, I will be working. I appreciate the offer though, Grattan is a lot of fun. Used to live across the street on Wabasis lake during the summers. :tup:

Started the BP turbo install this past week. JCHammond spent a week up here being the lead tech. I was the tool gopher. :icon17:
Here is a few pics.
Southbend Stage 3 daily quiet disc, Zspeed flywheel and CMAK and new oem clutch master cylinder.
https://i.imgur.com/vIjeLYcl.jpg
https://i.imgur.com/oJygqvfl.jpg
https://i.imgur.com/TfKI6KVl.jpg
https://i.imgur.com/dzG6MgIl.jpg

Intercooler being test fitted. We had to drill out the holes on the mounts on the intercooler as the holes were only 1/4" dia. and 20mm off from the mounting points. Easy to do as it is aluminum.
https://i.imgur.com/Gmow9o9l.jpg
https://i.imgur.com/U5uRfmLl.jpg
Mounted up you can see their holes and the holes that we drilled to be able to use their brackets. Fitted the Fast Intentions tow bar over the intercooler.
https://i.imgur.com/zqzwvvvl.jpg

While we were at it, the rear diff bushing was replaced with a SPL solid bushing. This was a pain in the azz.
https://i.imgur.com/UL7EjyHl.jpg
Two large sockets, some threaded rod, curse words and 3 voodoo rituals later, it came out and no sawzall needed. :tup:
https://i.imgur.com/kzQWCdMl.jpg

Rear diff. out of the car.
https://i.imgur.com/KO7F9sel.jpg

First day that JC was here, we finished up the 4 post lift install. Bendpak HD-9.
On the highest position, I have a couple inches clearance to the joists and enough room to get off the locks and lower the car. :tup:
https://i.imgur.com/g0XvxoEl.jpg

Gives an idea of how high it can go, JC is 6'6".
https://i.imgur.com/svE41tzl.jpg

Damage from the Zdayz trip. 4" diameter chunk of concrete came out from under Eastwest's car and then bashed under mine. It caught the cross brace and the exhaust resonator and heat shield.
https://i.imgur.com/nLaTIXvl.jpg

JC fit four 325s in the back of his Camry for the trip up here.
https://i.imgur.com/NQSYXg4l.jpg

Back to turbo install.
Some pipes under the car mounted up.
https://i.imgur.com/zWdH5f3l.jpg