Nissan 370Z Forum
Page 7 of 19 « First 56 7 8917 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Member's 370Z Gallery (http://www.the370z.com/members-370z-gallery/)
-   -   Tturbo370z 800whp build thread (http://www.the370z.com/members-370z-gallery/100221-tturbo370z-800whp-build-thread.html)

YzGyz 02-10-2015 02:02 PM
Yup
Quote:
Originally Posted by tturbo370z (Post 3107562)
I have been battling not going wide body for quit a while now. I finally came to grips with repainting the entire car not long ago. I will inquire about doing a true widebidy but am unaware of anyone here capable of doing something here in Phx like DTM did for mikes Z. Oh and the wife would stop putting out Indefinetly :wtf2: but........I'm still thinkig about it :roflpuke2: ugh means these wheels are not gonna be deep enuf......again :tup:


A performance/sticky tire I a 405? :yum: me want to see it

At lest the wife let's you ride the girl in the garage hard. But, it's not the same nor smart. I'd choose the wife for now. This is comming from a single man.

Edit: I forgot to mention u out have some BIG BALLS for even thinking it.. lol

YzGyz

JARblue 02-10-2015 02:44 PM
560mm (22") wide lol

Mickey Thompson 6657 Tire 560 mm Tire Width, 40, 15 in. Wheel Diameter - JCWhitney

This guy looks pretty mean, too (don't think it's quite 560 tho)
Hoosier 19410, Hoosier Pro Street Radial Tires | Hoosier
http://www.jegs.com/images/photos/50...22-19410_4.jpg

Rusty 02-10-2015 02:52 PM
Quote:
Originally Posted by JARblue (Post 3107731)
Wonder what a Z would look like running a square set-up with those. :icon17:

JARblue 02-10-2015 02:55 PM
:icon18: SQUARE!! :rofl2:

That would be like a quad dualie 370Z. Each tire is bigger than two stock sport package rear tires combined :eek:

tturbo370z 02-11-2015 01:19 AM
Quote:
Originally Posted by Rusty (Post 3107744)
Wonder what a Z would look like running a square set-up with those. :icon17:
The opposite of the stances crowd, but safer :icon14: of course u can kiss your knuckles, u joints , tie rods etc good bye but hey it looks cool :driving:

onzedge 02-14-2015 05:02 AM
Quote:
Originally Posted by JARblue (Post 3107731)
I can make those fit!!!

gbrettin 02-14-2015 08:44 AM
Quote:
Originally Posted by onzedge (Post 3111580)
I can make those fit!!!
Anything can be done with a sawzall...

More room for tires? check! Weight reduction? check! Speed holes? check!

Nice work on the build and thanks for sharing the pictures!

Rid3_FaM0uS 02-14-2015 11:13 AM
Orrrr you could just do it the simple way and run hella negative offsets and one mean *** widebody kit!

Rusty 02-14-2015 12:09 PM
Plasma cutter, mig welder, 2 open top 55gal drums cut down the middle and then cut the bottom off. Plasma cut the fender arches on the car. Mount the tires on the car. Put 2x4's on top of the tires for tub clearance. Now put put your cut drum pieces on top of the tires, and weld into place. :D

I DO have a picuture of this in my head. :eek: Because I have done this before on a friends 4x4. :bowrofl:

tturbo370z 02-14-2015 12:25 PM
Quote:
Originally Posted by Rusty (Post 3111877)
Plasma cutter, mig welder, 2 open top 55gal drums cut down the middle and then cut the bottom off. Plasma cut the fender arches on the car. Mount the tires on the car. Put 2x4's on top of the tires for tub clearance. Now put put your cut drum pieces on top of the tires, and weld into place. :D

I DO have a picuture of this in my head. :eek: Because I have done this before on a friends 4x4. :bowrofl:
Get your butt to Phx then rusty and let's do this :tup: I don't think the wife wouldn't mind me ordering yet another set of wheels n tires b4 my latest set show up :ugh2:

GaleForce 02-14-2015 01:04 PM
Quote:
Originally Posted by tturbo370z (Post 3111883)
Get your butt to Phx then rusty and let's do this :tup: I don't think the wife wouldn't mind me ordering yet another set of wheels n tires b4 my latest set show up :ugh2:
You like to play with fire, don't you? :bowrofl:

Rid3_FaM0uS 02-16-2015 06:35 PM
I truly believe he does sometimes lmfao

tturbo370z 03-03-2015 11:47 AM
My wheels and tires are out for delivery and I'm at work noooooooooo!!!:superghey:

bullitt5897 03-03-2015 12:00 PM
FYI... if you start running into backpressure issues... look into porting the turbo manifold! I am on the T25+ custom housings and I was able to remove over 1/4" of material from the turbo manifold outlet!

jwick 03-03-2015 12:20 PM
Quote:
Originally Posted by tturbo370z (Post 3127138)
My wheels and tires are out for delivery and I'm at work noooooooooo!!!:superghey:
Cough...cough...cough...http://www.runemasterstudios.com/gra...ages/sick3.gif

You are looking ill. I think you should probably head home for the day:tup:


All times are GMT -5. The time now is 07:48 PM.
Page 7 of 19 « First 56 7 8917 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2