Best way to attack sintering on wheels?

dmhenderson · 10-09-2014, 12:32 PM

So I have a friend who just bought an older subie bugeye and has a sintering issue from the previous owner.
I suggested Sonax and he has only had limited success. Iron Cut vanished from the market (possibly hazardous). I choked on the fumes a couple times.

Any suggestions from detail wizards?

SouthArk370Z · 10-09-2014, 12:55 PM

Quote:

Originally Posted by dmhenderson

... Iron Cut vanished from the market (possibly hazardous). I choked on the fumes a couple times. ...

Is this the same stuff?
"AQuartz Crystal Titan PPF Coatings"

dmhenderson · 10-09-2014, 01:24 PM

Yep that's it. Check the sketchy order form. Detailers Domain sold it for a while.

Chuck33079 · 10-09-2014, 01:25 PM

Will a clay bar get it out? Also, did Iron-X disappear as well?

dmhenderson · 10-09-2014, 01:34 PM

I don't know if clay will get it out. Iron-X is still out there. Actually haven't tried it.

SouthArk370Z · 10-09-2014, 02:53 PM

Quote:

Originally Posted by dmhenderson

Yep that's it. Check the sketchy order form. Detailers Domain sold it for a while.

I didn't get that far earlier, but, once I did, I understand.

I dug a little deeper and couldn't come up with a US distributor.

According to the MSDS http://www.aquartz.co/web/doc/msds_ironcut.pdf (the editor is not letting me insert proper links), it's Ammonium thioglycolate (<27.0%), Maltitol (< 10.0%), D-Sorbitol (< 14.0%), and water (> 45.0%), plus some "Additive". Maybe you can find something with a similar composition.

GM_Traitor3.5 · 10-10-2014, 09:02 AM

Iron-X was going to be my reco. The Adam's Deep Wheel Cleaner actually works a bit better than Sonax and only needs light agitation to really remove just about every bit of brake dust from clearcoated wheels.

dmhenderson · 10-10-2014, 12:26 PM

Thanks. Appreciate the feedback.

10-09-2014, 12:32 PM	#1 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Best way to attack sintering on wheels? So I have a friend who just bought an older subie bugeye and has a sintering issue from the previous owner. I suggested Sonax and he has only had limited success. Iron Cut vanished from the market (possibly hazardous). I choked on the fumes a couple times. Any suggestions from detail wizards? __________________

10-09-2014, 01:24 PM	#3 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Yep that's it. Check the sketchy order form. Detailers Domain sold it for a while. __________________

10-09-2014, 01:25 PM	#4 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Will a clay bar get it out? Also, did Iron-X disappear as well? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

10-09-2014, 01:34 PM	#5 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	I don't know if clay will get it out. Iron-X is still out there. Actually haven't tried it. __________________

10-10-2014, 09:02 AM	#7 (permalink)
GM_Traitor3.5 A True Z Fanatic Join Date: Aug 2010 Location: Fairfax, VA Posts: 3,073 Drives: '13 GT/Brembo 6MT Rep Power: 21	Iron-X was going to be my reco. The Adam's Deep Wheel Cleaner actually works a bit better than Sonax and only needs light agitation to really remove just about every bit of brake dust from clearcoated wheels. __________________ 2013 5.0 \| Brembo \| Steeda \| Koni \| Borla \| MGW \| TWM \| JLT \| UMI \| Whiteline \| Fays2 \| McLeod \| Redline Goods \| Redline Tuning \|

10-10-2014, 12:26 PM	#8 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Thanks. Appreciate the feedback. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Takeda Attack CAI	Z_Enthusiast	Intake/Exhaust	21	01-31-2013 02:56 AM
Back for a Re-Attack!	BrianUSMC	New Forum Member	3	08-14-2010 09:44 PM
Devising my attack plan	Zilverz	Nissan 370Z Pricing / Ordering Discussions	0	08-09-2010 09:41 AM
Wagon attack ii	MightyBobo	Other Vehicles	0	12-09-2009 10:52 PM