Nissan 370Z Forum
Page 197 of 251 « First 97147187195196 197 198199207247 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   The Lounge (Off Topic) (http://www.the370z.com/lounge-off-topic/)
-   -   The New "What did you do with your Z today" (with off topic replies) VI (http://www.the370z.com/lounge-off-topic/71930-new-what-did-you-do-your-z-today-off-topic-replies-vi.html)

LMBmikeZ 07-15-2013 12:36 PM
Quote:
Originally Posted by JARblue (Post 2404922)
Yup. In fact, I remove them every time I wash the car since it's so easy. There are two tabs that pinch outward to hold the side markers in place.

Being careful not to scratch the paint, slip your fingernail under the marker at the point closest to the front of the car. Push the side marker sideways towards the back of the car. This should release the tab, allowing the front edge of the side marker to pop out where your finger was located. It should pop out either on its own or with just a little leverage using your finger. When I unplug the harness, I just let it fall back into the fender, so I often have to use a tool to fetch it when reinstalling the markers after a wash.
Thanks :tiphat:

LMBmikeZ 07-15-2013 12:37 PM
Quote:
Originally Posted by kenchan (Post 2404993)
sounds good mr.jar. :tup: i hate polish dust getting in to the nooks.
:iagree:

kenchan 07-15-2013 12:57 PM
i use a boar's hair paint brush looking thing to remove polish dust. :D

DEpointfive0 07-15-2013 01:31 PM
Quote:
Originally Posted by happytheman (Post 2404884)
I suppose whether they fix the 370 or not is dependent on what code it's throwing. Do you know what it is already?
Misfire cylinder 6, and I slept great after my rant. Thank god for that

GaleForce 07-15-2013 01:39 PM
Quote:
Originally Posted by blackcherry20 (Post 2404642)
Galeboostforce!! HI!
How was your night? you had to work right?
Yes I worked last night. Was really tired this morning, now I'm up because I have a "local" guy coming to pic up a pillar. I was expecting him after 3pm, which would have been perfect, but he called and told Mr.Force he would be here in an hour, that was at 1pm. I'm going to be a cranky boy tonight. :yawn:

LMBmikeZ 07-15-2013 01:40 PM
Quote:
Originally Posted by kenchan (Post 2405037)
i use a boar's hair paint brush looking thing to remove polish dust. :D
I also use one of my detail brushes to get all the dust off. :tiphat:

GaleForce 07-15-2013 01:41 PM
Quote:
Originally Posted by onzedge (Post 2404658)
Ooops, I just went to one of the NSFW threads out of habit. I am in the airport at a crowded gate.
Problem? :confused:

:bowrofl:

GaleForce 07-15-2013 01:42 PM
Quote:
Originally Posted by JARblue (Post 2404662)
:yum:

Good Morning :hello:
Good day Jar :hello: Find some cheese yet?

GaleForce 07-15-2013 01:46 PM
Quote:
Originally Posted by LMBmikeZ (Post 2404711)
F*cking hot as hell here today! Feels like 40*C+ with the HUMIDITY yuk :shakes head:
I know right! My wife has to work in it this afternoon. :icon14: My "lucky" self gets to work in a climate controlled building, air conditioned. I don't dare remind her about this.

Haboob 07-15-2013 01:51 PM
Nice and cool here. About 101 right now, supposed to be 108. 20-25% humidity too.



Not bad considering a week and a half ago it was 118. :tup: It's almost sweater weather! :excited: :thumbsdown:

Pintsize725 07-15-2013 01:54 PM
Quote:
Originally Posted by Haboob (Post 2405131)
Nice and cool here. About 101 right now, supposed to be 108. 20-25% humidity too.



Not bad considering a week and a half ago it was 118. :tup: It's almost sweater weather! :excited: :thumbsdown:
Ewww.

JARblue 07-15-2013 02:17 PM
Quote:
Originally Posted by kenchan (Post 2404993)
sounds good mr.jar. :tup: i hate polish dust getting in to the nooks.
Yeah... the first time I waxed the Z, I got wax all over every piece of trim possible. A year later, I was still finding dried wax residue in random nooks and crannies :shakes head: Now that I'm much more intimate with the Z, I do a much better job avoiding that type of crap :tup:

Quote:
Originally Posted by LMBmikeZ (Post 2405016)
Thanks :tiphat:
Any time my good man :tiphat:

JARblue 07-15-2013 02:22 PM
Quote:
Originally Posted by kenchan (Post 2405037)
i use a boar's hair paint brush looking thing to remove polish dust. :D
I don't have any detailing brushes except one specifically for cleaning the lug nuts :ugh2:

Quote:
Originally Posted by GaleForce (Post 2405112)
Good day Jar :hello: Find some cheese yet?
Howdy-ho :hello: Yup, I had some delicious 3-pepper colby jack on my turkey sandwich at lunch :yum:

Quote:
Originally Posted by Haboob (Post 2405131)
Nice and cool here. About 101 right now, supposed to be 108. 20-25% humidity too.

Not bad considering a week and a half ago it was 118. :tup: It's almost sweater weather! :excited: :thumbsdown:
:rofl2: :rofl2: :rofl2:

kenchan 07-15-2013 02:27 PM
Quote:
Originally Posted by JARblue (Post 2405180)
I don't have any detailing brushes except one specifically for cleaning the lug nuts :ugh2:
yah, i only use that boar's hair paintbrush looking thing once in a while. it's really useful when dust gets into the window trim seal. sometimes my MF towel can't reach it and the boar's hair is soft enough that it does not haze the plastic and rubber seal around the glass. i dont use it over paint unless it's in the door jam or hinges as nissan paint is so soft.

it's not a necessity but it's a convenient tool to have. :D

happytheman 07-15-2013 02:30 PM
Quote:
Originally Posted by kenchan (Post 2404993)
sounds good mr.jar. :tup: i hate polish dust getting in to the nooks.
You hate polish dust getting in your nooks? Perhaps a low-calorie diet and more hamster-wheel action will help that. :wtf2:

onzedge 07-15-2013 02:31 PM
Quote:
Originally Posted by GaleForce (Post 2405111)
Problem? :confused:

:bowrofl:
:tiphat:

happytheman 07-15-2013 02:32 PM
Quote:
Originally Posted by GaleForce (Post 2405124)
I know right! My wife has to work in it this afternoon. :icon14: My "lucky" self gets to work in a climate controlled building, air conditioned. I don't dare remind her about this.
What does the little lady do that keeps her outside in the heat? Lay concrete? :icon17:

happytheman 07-15-2013 02:34 PM
Quote:
Originally Posted by DEpointfive0 (Post 2405095)
Misfire cylinder 6, and I slept great after my rant. Thank god for that
And they won't check because of custom exhaust?? :icon14:

happytheman 07-15-2013 02:41 PM
Quote:
Originally Posted by b15 (Post 2403849)
Did some off roading in the Z yesterday. Went canoeing with the wife and didnt realize the rental place was a half mile down a dirt road from the main road. Just idled 2nd gear all the way :) I got some looks haha.
https://fbcdn-sphotos-e-a.akamaihd.n...30883649_n.jpg

Needless to say I spent this morning getting her all shiny again.
:wtf2::wtf2::wtf2::wtf2::wtf2::wtf2:

kenchan 07-15-2013 02:45 PM
Quote:
Originally Posted by happytheman (Post 2405193)
You hate polish dust getting in your nooks? Perhaps a low-calorie diet and more hamster-wheel action will help that. :wtf2:
yah, i dont like dust in my Z's nooks.


so you not getting enough vitamins then? little bitchy today? :icon17:

happytheman 07-15-2013 03:08 PM
Quote:
Originally Posted by kenchan (Post 2405234)
yah, i dont like dust in my Z's nooks.


so you not getting enough vitamins then? little bitchy today? :icon17:
Awwww, no way man! I'm just capitalizing on a moment, and you didn't have as much fun with it as I did. :tup:

happytheman 07-15-2013 03:11 PM
OMG, this site is just killing me! I picked it up over in the DSLR discussion thread! Thanks Lunaz! :tup:

You Are Not a Photographer | Exposing fauxtographers since 2011

DEpointfive0 07-15-2013 03:32 PM
Quote:
Originally Posted by happytheman (Post 2405199)
And they won't check because of custom exhaust?? :icon14:
Stillen exhaust, and I need a random bolt too... BS things...

Bolt to hold the intake down... I need to make it 100% stock

happytheman 07-15-2013 03:55 PM
Quote:
Originally Posted by DEpointfive0 (Post 2405305)
Stillen exhaust, and I need a random bolt too... BS things...

Bolt to hold the intake down... I need to make it 100% stock
sorry to hear that man. I'm guessing there's not another dealership within a reasonable distance (otherwise you wouldn't be towing 73 miles IIRC).

kenchan 07-15-2013 04:07 PM
Quote:
Originally Posted by happytheman (Post 2405282)
Awwww, no way man! I'm just capitalizing on a moment, and you didn't have as much fun with it as I did. :tup:
:confused:

i dont get the humor...

kenchan 07-15-2013 04:12 PM
anyway... in more important news, plan of action for tonight. :D

first, go for a walk to loosen my leg. im still limping from the kick scooter injury(?).
update my nuvi to latest free maps :D, check where the hell i placed my traffic adapter :confused:, track where my new tool bits are in the USPS system :ugh:

otherwise just relax and watch a dvd. :p

Nismo89 07-15-2013 04:26 PM
so apparently twinkies are back, the bankrupt company was bought out privately and they are officially back. and hitting stores everywhere

kenchan 07-15-2013 04:28 PM
Quote:
Originally Posted by Nismo89 (Post 2405374)
so apparently twinkies are back, the bankrupt company was bought out privately and they are officially back. and hitting stores everywhere
yah, conan mentioned that it's the same stock from 2yrs ago or something. :rofl2:

Nismo89 07-15-2013 04:31 PM
Quote:
Originally Posted by kenchan (Post 2405378)
yah, conan mentioned that it's the same stock from 2yrs ago or something. :rofl2:
:roflpuke2:

Shelves Stocked for Twinkies' 'Sweetest Comeback' - Yahoo!

onzedge 07-15-2013 04:34 PM
Greetings from the Federal Ammunition (CCI/Speer) plant in Lewiston!!!

JARblue 07-15-2013 04:37 PM
Quote:
Originally Posted by onzedge (Post 2405385)
Greetings from the Federal Ammunition (CCI/Speer) plant in Lewiston!!!
:hello:

onzedge 07-15-2013 04:40 PM
Quote:
Originally Posted by JARblue (Post 2405388)
:hello:
:tiphat:

LMBmikeZ 07-15-2013 05:00 PM
:hello:

LMBmikeZ 07-15-2013 05:03 PM
Finally some of the $$$ I have spent for around the house paid off, the central air conditioner I ordered was finally installed today! So today when I got home the house was nice and cool!

Isamu 07-15-2013 05:04 PM
bwahahahaa some guy on FB is threating to tell AK that I was talking **** to him on FB...

LMBmikeZ 07-15-2013 05:06 PM
:icon18:.........

:ugh2:..........

:wtf2: Facebook, what is this Facebook?

GaleForce 07-15-2013 05:08 PM
Quote:
Originally Posted by happytheman (Post 2405196)
What does the little lady do that keeps her outside in the heat? Lay concrete? :icon17:
She's not outside. She works inside with equipment that makes things even more hot. No windows, no air conditioning and no time to drink water until the scheduled break time. Good times :ugh2:

GaleForce 07-15-2013 05:11 PM
Quote:
Originally Posted by Nismo89 (Post 2405374)
so apparently twinkies are back, the bankrupt company was bought out privately and they are officially back. and hitting stores everywhere
Probably using offshore labour. Twinkles are now made in Bangladesh and freighted to North America for our enjoyment. :bowrofl:

GaleForce 07-15-2013 05:11 PM
Quote:
Originally Posted by onzedge (Post 2405385)
Greetings from the Federal Ammunition (CCI/Speer) plant in Lewiston!!!
:hello:

happytheman 07-15-2013 05:12 PM
Quote:
Originally Posted by GaleForce (Post 2405421)
She's not outside. She works inside with equipment that makes things even more hot. No windows, no air conditioning and no time to drink water until the scheduled break time. Good times :ugh2:
Oh jeezus! Is that how you crazy Canucks do things?! :rofl2:

Seriously tho, that blows. :(


All times are GMT -5. The time now is 11:17 PM.
Page 197 of 251 « First 97147187195196 197 198199207247 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2