Stillen gen 3 install

SlowZ · 05-24-2014, 09:25 PM

I'm about to do my install and I was looking it over and noticed the stock air boxes have a resonator on the drivers side on the bottom of the tube and the Stillen pipe has no where to put that. What do I do with that piece? Thanks

gomer_110 · 05-24-2014, 09:29 PM

If I remember right, the resonator piece is removed. It's been a year since I installed mine so you better check your install instructions just to make sure.

Trips · 05-24-2014, 10:11 PM

Have a look at AK's thorough DiY

DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)

wanker · 05-24-2014, 10:14 PM

You eliminate the resonator as it's not essential. You won't even know it's gone.

SlowZ · 05-24-2014, 10:30 PM

Thanks guys. When I looked at it I thought the lower piece was attached to the hose that goes into the side of the tube of both the stock and Stillen intake.

Trips I did have a look over his and some others and maybe I skipped over it.
The reason why I ask this is when you remove it, wouldn't their be an open hole coming out of the motor once the resonator is taken out?

SlowZ · 05-24-2014, 10:33 PM

Never mind! Looked at the picture of the stock intake and i finally saw that the resonator is attached to the intake itself. Got it!!! Thanks again everyone

05-24-2014, 09:25 PM	#1 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	Stillen gen 3 install I'm about to do my install and I was looking it over and noticed the stock air boxes have a resonator on the drivers side on the bottom of the tube and the Stillen pipe has no where to put that. What do I do with that piece? Thanks

05-24-2014, 09:29 PM	#2 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36940	If I remember right, the resonator piece is removed. It's been a year since I installed mine so you better check your install instructions just to make sure. SlowZ likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

05-24-2014, 10:11 PM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Have a look at AK's thorough DiY DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z) SlowZ likes this. __________________

05-24-2014, 10:14 PM	#4 (permalink)
wanker Enthusiast Member Join Date: Apr 2014 Location: San Diego Posts: 443 Drives: 2011 370Z S/T A7 Rep Power: 2901	You eliminate the resonator as it's not essential. You won't even know it's gone. SlowZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen install help	raymondo510	Northern California Region	13	07-28-2012 06:09 AM
Stillen G3 Install (Little Help, Plz)	Slynky	Intake/Exhaust	4	09-24-2010 08:28 PM
Stillen HFC Install - Gaskets?	hfrog355	Intake/Exhaust	1	07-07-2010 11:37 AM
Another Stillen G3 Install	speedworks	Intake/Exhaust	9	12-07-2009 09:46 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 02:21 AM

05-24-2014, 10:30 PM	#5 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	Thanks guys. When I looked at it I thought the lower piece was attached to the hose that goes into the side of the tube of both the stock and Stillen intake. Trips I did have a look over his and some others and maybe I skipped over it. The reason why I ask this is when you remove it, wouldn't their be an open hole coming out of the motor once the resonator is taken out?

05-24-2014, 10:33 PM	#6 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	Never mind! Looked at the picture of the stock intake and i finally saw that the resonator is attached to the intake itself. Got it!!! Thanks again everyone